ICP DAS USA iDaSer-9000 User manual

Copyright © 2017ICP DAS Co., Ltd. All Rights Reserved. E-mail: [e-mail] 1
iDaSer-9000 Quick Start
Oct 2017, Version 1.0.0
Congratulations! ··············································
Thanks for purchasing the iDaSer-9000 module - the data management server.
This Quick Start Guide will provide related information which needed to get
start with the iDaSer-9000 module. Please also consult the user manual for
detailed information on the setup and usage of the iDaSer-9000 module.
What’s In the Box! ············································
In addition to this guide, the package includes the following items:
iDaSer-9000
Fieldbus
CD
Quick Start
Screw
Drive
44 MM DIN-Rail
Clip*2
M3x6L
Screw * 8
Technical Support ············································
iDaSer-9000 User Manual
ftp://ftp.icpdas.com.tw/pub/cd/idaser/9000/manual/
iDaSer-9000 Website
http://www.icpdas.com/root/product/solutions/industrial_iot/idaser/idaser-9000.html
ICP DAS Website
http://www.icpdas.com/

Copyright © 2017ICP DAS Co., Ltd. All Rights Reserved. E-mail: [e-mail] 2
Appearance
NO.
Name
Description
1
PWR
Turn ON / OFF.
2
Reset
Keep pressing for 3 seconds, and the network setting
will be reset as default.(Reboot after this action)
3
UART
The interfaces of RS-232 and RS-485(Reserved)
4
USB
On purpose to connect USB or keyboard.
5
Ethernet
Two network cards for internal and external network.
6
VGA
Connection to monitor.
7
LED
Display the status of devices.
Wire connections and pin assignments

Copyright © 2017ICP DAS Co., Ltd. All Rights Reserved. E-mail: [e-mail] 3
LED Indicator
The iDaser-9000 module provides six LED indicators.
The Following is an overview of the purpose and function of each LED
indicator together with a description.
NO.
LED name.
LED state
LED Description
A
PWR (G)
ON
The power of the module is ON.
B
Active (G)
Flashing
The system is working.
OFF
The system is OFF.
C
HDD1 Err (R)
ON
HDD1 error.
OFF
HDD1 is normal.
D
HDD2 Err (R)
ON
HDD2 error.
OFF
HDD2 is normal.
E
Access (G)
ON
HDD1 is active.
OFF
HDD1 disconnected.
F
Access (G)
ON
HDD2 is active.
OFF
HDD2 disconnected.

Copyright © 2017ICP DAS Co., Ltd. All Rights Reserved. E-mail: [e-mail] 4
Ethernet
The Ethernet status indicator on iDaSer-9000 is part of the built-in RJ-45
connector, such as shown in the figure below.
No.
LED Name
LED Status
LED Description
G
10/100M
ON
Normal operation.
OFF
Ethernet lost connection.
Link/Act
Flashing
System is handling data.
H
GbE
ON
Normal operation.
OFF
Ethernet lost connection.
Link/Act
Flashing
System is handling data.
Web Configuration
The configuration for the module parameters on the iDaSer-9000 module
can be performed via a standard web browser using the embedded web
configuration function. The user can configure the services via connecting
the IP address of the iDaSer-9000 module on web browser.
The default IP addresses of the iDaSer-9000 Module are 192.168.255.1
and 10.0.8.1. (Username:admin;Password:icpdas888)
About the more detail information for the iDaSer-9000 module, please
refer to the user’s manual.