ICP DAS USA ET-87P2 User manual

Copyright © 2010 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [email protected]
ET-87Pn Quick Start Guide
1
Quick Start Guide for
ET-87Pn Series
October 2010, Version 1.0.1
Congratulations on purchasing ET-87Pn - the most popular automation solution for
remote monitoring and control application. This Quick Start Guide will provide
information needed to get started with ET-87Pn. Please also consult the User Manual
for detailed information on the setup and use of ET-87Pn.
In addition to this guide, the package includes the following items:
ET-87Pn Module
(ET-87P2/4/8)
Software Utility CD
Screw Driver
(1C016)
ET-87Pn User Manual
CD:\NAPDOS\NAPDOS\u87pn_io_unit\ET-87Pn\Document\
http://ftp.icpdas.com/pub/cd/8000cd/napdos/87pn_io_unit/et-87pn/document/
ET-87Pn Website
http://www.icpdas.com/products/io_expansion_unit/et-87pn.htm
ICP DAS Website
http://www.icpdas.com/

Copyright © 2010 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [email protected]
ET-87Pn Quick Start Guide
2
1
----------------------------------------------------------------------------------
Mounting the Hardware
The ET-87Pn installation must provide proper ventilation, spacing, and grounding to
ensure the equipment will operate as specified. Aminimum clearance of 50mm between
the ET-87Pn and the top and bottom side of the enclosure panels must be provided.
2
-----------------------------------------------------------------------------------
Connecting to PC, Network and Power
The ET-87Pn is equipped with RJ-45 Ethernet ports for connection to an Ethernet
hub/switch and PC. You can also link directly the ET-87Pn to PC with an Ethernet cable.

Copyright © 2010 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [email protected]
ET-87Pn Quick Start Guide
3
3
---------------------------------------------------------------------------------
Installing the Tools and Utilities
Step 1: Install the MiniOS7 Utility tool
The MiniOS7 Utility can be obtained from companion CD or our FTP site:
CD:\Napdos\minios7\utility\minios7_utility\
ftp://ftp.icpdas.com/pub/cd/8000cd/napdos/minios7/utility/minios7_utility/
Step 2: Install the VxComm Utility tool
The VxComm Utility can be obtained from companion CD or our FTP site:
CD:\NAPDOS\Driver\VxComm_Driver\
ftp://ftp.icpdas.com/pub/cd/8000cd/napdos/driver/vxcomm_driver/
Step 3: Install the DCON Utility tool
The DCON Utility can be obtained from companion CD or our FTP site:
CD:\NAPDOS\Driver\DCON_Utility\
ftp://ftp.icpdas.com/pub/cd/8000cd/napdos/driver/dcon_utility/
4
----------------------------------------------------------------------------------
Using MiniOS7 Utility to Assign a New IP
The ET-87Pn are Ethernet devices, which comes with a default IP address, therefore,
you must first assign a new IP address to the ET-87Pn.
The factory default IP settings are as follows:
Item
Default
IPAddress
192.168.255.1
Subnet Mask
255.255.0.0
Gateway
192.168.0.1

Copyright © 2010 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [email protected]
ET-87Pn Quick Start Guide
4
Step 1: Run the MiniOS7 Utility
Double-click the MiniOS7 Utility
shortcut on your desktop.
Step 2: Press “F12” or choose “Search” from the “Connection” menu
After pressing F12 or choosing Search from Connection menu, the MiniOS7 Scan
dialog will appear, that will display a list of all the MiniOS7 modules on your network.
See the status tip, waiting
for the search to be done.

Copyright © 2010 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [email protected]
ET-87Pn Quick Start Guide
5
Step 3: Choose the module name and then choose “IP setting” from the toolbar
Choose the module name for fields in the list, and then choose IP setting from the
toolbar.
Step 4: Assign a new IP address and then choose “Set” button
Step 5: Choose “Yes” button
After completing the settings, press the Yes
button in the Confirm dialog box to exit the
procedure.
1. Choose the field “192.168.255.1”
2

Copyright © 2010 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [email protected]
ET-87Pn Quick Start Guide
6
5
----------------------------------------------------------------------------------
Using VxComm Utility to Create Virtual COM Ports
You can join Ethernet ports into one virtual COM port in order to let one application
receive data from your ET-87Pn.
Step 1: Run the VxComm Utility
Double-click the
VxComm Utility
shortcut on your
desktop.
Step 2: Press “Search Servers” toolbar
After pressing Search Servers from the toolbar, that will search all of your network
modules.
Press the “Search Servers”

Copyright © 2010 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [email protected]
ET-87Pn Quick Start Guide
7
Step 3: Choose the IP Address field you specified easier and press “Add
Server(s)” button from the toolbar
Choose the IPAddress field you specified in the list, and then press Add Server(s) from
the toolbar.
Step 4: Choose the Valid COM Port number you wish to use
1. Choose the IP Address field you specified
2
2
3
1. Choose the COM Port name you wish to use

Copyright © 2010 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [email protected]
ET-87Pn Quick Start Guide
8
6
----------------------------------------------------------------------------------
Inserting and Wiring I/O modules
There are various types of I/O expansion modules for interfacing many different field
devices to the ET-87Pn system.
For more information about I/O
expansion module, please refer to
http://www.icpdas.com/products/PA
C/i-8000/8000_IO_modules.htm
These modules have their own
manuals, so if you are using them
you should supplement this manual
with the manual specifically
designed for the special module.
7
----------------------------------------------------------------------------------
Using DCON Utility to Configure I/O Modules
DCON Utility is an easy-to-use utility to help you configure the I/O modules.
For more detailed information on how to use DCON Utility to configure I/O modules,
please refer to ET-87Pn User Manual
For more details, please refer to DCON Utility web site:
http://www.icpdas.com/products/dcon/introduction.htm