ICP DAS USA PET-7261 User manual

ET-7261 Ethernet Remote I/O - QuickStart (Mar/2018)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
1
PET-7000/ET-7000 Quick Start Guide
P ET-7052/ET-7052 Quick Start Guide
PET/ET-7261
Modbus TCP Based Ethernet I/O Module with 2 Ethernet ports,
with 11-channel Relay Output
Quick Start Guide
Congratulations on purchasing PET/ET-7261 - 11-channel Relay Output. The most popular
automation solution for Ethernet remote monitoring and control application. This Quick Start
Guide will provide information needed to get started with PET/ET-7261. Please also consult
the User Manual for detailed information on the setup and use of PET/ET-7261
In addition to this guide, the package includes the following items:
PET/ET-7261 Module Software Utility CD
Technical Support
-PET/ET-7261 Website
http://www.icpdas-usa.com/et_7261.html
-ICP DAS USA Website
http://www.icpdas-usa.com/
Phone : [phone]
Email: [e-mail]
Tech Support: [e-mail]

ET-7261 Ethernet Remote I/O - QuickStart (Mar/2018)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
2
2
1
-----------------------------------------------------------
Configuring Boot Mode
Init mode: For configuration. After booting, PET/ET-7261 will not run the
default firmware and cannot surf the internet. Use this mode to
update MiniOS7 image.
Normal mode: For normal working. After booting, PET/ET-7261 will run
the default firmware and can use all PET/ET-7261 functions.
----------------------------------------------------------------------------------
Connecting to Network, PC and Power
The PET/ET-7261 is equipped with an RJ-45 Ethernet port for connection to an Ethernet
hub/switch and PC.

ET-7261 Ethernet Remote I/O - QuickStart (Mar/2018)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
3
PET-7000/ET-7000 Quick Start Guide
3
4
---------------------------------------------------------------------------------
Installing the MiniOS7 Utility
Step 1: Get the MiniOS7 Utility tool
The MiniSO7 Utility can be obtained from companion CD or our site:
CD:\Napdos\minios7\utility\minios7_utility\
http://www.icpdas-usa.com/minios7utility.html
Step 2: Follow the prompts to complete the installation
After the installation has been completed, there will
be a new short-cut for MiniOS7 Utility on the
desktop.
----------------------------------------------------------------------------------
Using MiniOS7 Utility to Assign a New IP
The PET/ET-7261 are Ethernet devices, which comes with a default IP address, therefore, you
must first assign a new IP address to the PET/ET-7261.
The factory default IP settings are as follows:
Item
Default
IPAddress 192.168.255.1
Subnet Mask 255.255.0.0
Gateway 192.168.0.1

ET-7261 Ethernet Remote I/O - QuickStart (Mar/2018)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
4
PET-7000/ET-7000 Quick Start Guide
Step 1: Run the MiniOS7 Utility
Double-click the MiniOS7 Utility
shortcut on your desktop.
Step 2: Press “F12” or choose “Search” from the “Connection” menu
After pressing F12 or choosing Search from Connection menu, the MiniOS7 Scan
dialog will appear, that will display a list of all the MiniOS7 modules on your network.

ET-7261 Ethernet Remote I/O - QuickStart (Mar/2018)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
5
Step 3: Choose the module name and then choose “IP setting” from the toolbar
Step 4: Assign a new IP address and then choose “Set” button
Step 5: Choose “Yes” button
After completing the settings, press the Yes
button in the Confirm dialog box to exit the
procedure.

ET-7261 Ethernet Remote I/O - QuickStart (Mar/2018)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
6
PET-7000/ET-7000 Quick Start Guide
5
6
PET-7000/ET-7000 Quick Start Guide
----------------------------------------------------------------------------------
Enabling Adobe Flash Player in Your Brower
Your browser must support Adobe Flash Player and have it enabled in order to use the
PET/ET-7261 web site.
If you do not have it installed, please go to the following website and install it.
The Adobe Flash Player Download Center:
http://get.adobe.com/flashplayer/
----------------------------------------------------------------------------------
Go to the PET/ET-7261 Web Site to Check out Functions
The PET/ET-7261 contains an advanced web configuration system that provides users with
access PET/ET-7261 applications through a standard web browser.
Step 1: Start PET/ET-7261
Make sure the switch placed in the
“ Normal” position.
Then reboot PET/ET-7261
Step 2: Open a browser
Please use a standard internet browser to view the PET/ET-7261 webpage, such as Mozilla
Firefox or Internet Explorer…etc.
If you haven’t changed the default IP address of the PET/ET-7261, please refer to “4. Using
MiniOS7 Utility to Assign a New IP” to configure it.

ET-7261 Ethernet Remote I/O - QuickStart (Mar/2018)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
7
Step 4: Fill out the User name and Password
After entering the IP address, the login
dialog box will appear and prompt you to
enter your username and password.
The factory default user name and password
are as follows (Case sensitive) :
Item
Default
User name Admin
Password Admin
Step 5: Welcome to PET/ET-7261 web site
After logging into the PET/ET-7261 web site, the welcome page will appear.

ET-7261 Ethernet Remote I/O - QuickStart (Mar/2018)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
8
PET-7000/ET-7000 Quick Start Guide
Under the Main Menu, expand the Web HMI, and
then select the Web HMI option to check the
values of the data acquisition.