ICP DAS USA TPD-283U-H User manual

TPD-280U-H 2.8” TouchPAD - QuickStart (Oct/2017)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717 1
TPD-280U-H
2.8'' High Resolution Touch Screen HMI Controller with RS-
485, USB download, RTC
Quick Start Guide
Product Website:
https://www.icpdas-usa.com/tpd_280u_h
1 Shipping package
Thanks for buying ICPDAS TPD 2.8 inch H series device. This shipping package contains
the following items:
TPD-280-H/280U-H Quick Start (This Document)
2 Appearance

TPD-280U-H 2.8” TouchPAD - QuickStart (Oct/2017)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717 2
3 Pin Assignment
On the back of the TPD-280-H/280U-H:
The pin assignments:
No
Pin
Description
0
F.G.
Frame Ground. F.G. is connected to the inside EMI or ESD suppression
circuits. Make sure that F.G. is connected to the Earth
1
VDC
DC input Voltage (range: +12 V ~ +48 V)
2
GND
Connected to the power supply’s ground pin
3
Data+
The positive data line of the RS-485 network
4
Data-
The negative data line of the RS-485 network

TPD-280U-H 2.8” TouchPAD - QuickStart (Oct/2017)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717 3
4 First Use of the TPD-280(U)-H

TPD-280U-H 2.8” TouchPAD - QuickStart (Oct/2017)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717 4
5 Creating First Project
To create your first project of the TPD-280-H/280U-H, install the free development tool,
HMIWorks and then refer to <<TouchPAD_getting_started.pdf>>, which can be found on
the FTP: http://ftp.icpdas.com/pub/cd/touchpad/document/english/programming_guide/
6 Hardware Installation
External Wall Box, EWB-T28 (optional) Outlet Box, OB120 (optional)