ICP DAS USA WP-2000-CE7 Series User manual

WP-2000-CE7 Series
User Manual
Version 1.0.4, November 2021
Service and usage information for
Technical support: [email protected]
Author: Tunglu Yu
Editor: Anna Huang

WP-2000-CE7 Series (WinCE7 Based) User Manual v 1.0.4 Page: 2
Warranty
All products manufactured by ICP DAS are under warranty regarding defective materials for
a period of one year, beginning from the date of delivery to the original purchaser.
Warning
ICP DAS assumes no liability for any damage resulting from the use of this product. ICP DAS
reserves the right to change this manual at any time without notice. The information
furnished by ICP DAS is believed to be accurate and reliable. However, no responsibility is
assumed by ICP DAS for its use, not for any infringements of patents or other rights of third
parties resulting from its use.
Copyright
Copyright @ 2019 by ICP DAS Co., Ltd. All rights are reserved.
Trademark
The names used for identification only may be registered trademarks of their respective
companies.
Contact US
If you have any problem, please feel free to contact us.
You can count on us for quick response.
Email: [email protected]

WP-2000-CE7 Series (WinCE7 Based) User Manual v 1.0.4 Page: 3
Contents
Contents.........................................................................................................................................................3
1. Introduction ...........................................................................................................................................6
1.1. Features .................................................................................................................................7
1.2. Specifications .......................................................................................................................10
WP-2241M-CE7 and WP-2241MX-CE7........................................................................101.2.1.
WP-2241MX-4GC-CE7 and WP-2241MX-4GE-CE7 ......................................................121.2.2.
1.3. Overview..............................................................................................................................14
1.4. Dimensions ..........................................................................................................................18
2. Getting Started.....................................................................................................................................19
2.1. Mounting the Hardware ......................................................................................................20
2.2. Mounting the Expansion Components/Accessories............................................................22
Mounting the XV-Board...............................................................................................222.2.1.
Inserting the SIM Card .................................................................................................252.2.2.
Installin the 3G/4G Communication LTE Module ........................................................262.2.3.
Installing the antenna ..................................................................................................28
2.2.4.
2.3. Configuring the Boot Mode.................................................................................................29
2.4. Using PAC Utility to Manage WinPAC ..................................................................................31
2.5. Changing the User Interface Language................................................................................32
2.6. Using DCON Utility Pro to Configure I/O Modules ..............................................................34
2.7. Using Dial-up Networking to Make a GPRS Connection......................................................37
3. Tools and Tasks.....................................................................................................................................41
3.1. PAC Utility ............................................................................................................................43
Menu Bar –File............................................................................................................443.1.1.
Menu Bar –Help..........................................................................................................453.1.2.
Property Tab - General.................................................................................................463.1.3.
Property Tab –Display .................................................................................................473.1.4.
Property Tab –IP Config...............................................................................................483.1.5.
Property Tab –Network...............................................................................................493.1.6.
Property Tab –Device Information..............................................................................52
3.1.7.
Property Tab –Auto Execution ....................................................................................533.1.8.
Property Tab –Rotary Execution .................................................................................543.1.9.
3.2. DCON Utility Pro ..................................................................................................................55
3.3. TaskMgr................................................................................................................................56

WP-2000-CE7 Series (WinCE7 Based) User Manual v 1.0.4 Page: 4
3.4. VCEP.....................................................................................................................................57
3.5. Remote_Display...................................................................................................................58
3.6. SendToCOM .........................................................................................................................59
3.7. RegEdit .................................................................................................................................60
3.8. ISQLW35...............................................................................................................................61
3.9. INotepad ..............................................................................................................................62
4. Your First WinPAC Program..................................................................................................................63
4.1. Preparing the Development Tools .......................................................................................64
4.2. Installing WP-2000-CE7 SDK ................................................................................................65
4.3. First WinPAC Program in VB.NET .........................................................................................67
Create a New Project ...................................................................................................684.3.1.
Specify the Path of PAC Reference...............................................................................714.3.2.
Add the Control to the Form........................................................................................744.3.3.
Add the Event Handling for the Control ......................................................................764.3.4.
Upload the Application to WinPAC..............................................................................774.3.5.
Execute the Application on WinPAC ............................................................................794.3.6.
4.4. First WinPAC Program in Visual C# ......................................................................................80
Create a New Project ...................................................................................................814.4.1.
Specify the Path of PAC Reference...............................................................................84
4.4.2.
Add the Control to the Form........................................................................................874.4.3.
Add the Event Handling for the Control ......................................................................894.4.4.
Upload the Application to WinPAC ..............................................................................904.4.5.
Execute the Application on WinPAC ............................................................................924.4.6.
4.5. First WinPAC Program in Visual C++ ....................................................................................93
Create a New Project ...................................................................................................944.5.1.
Configure the Platform ................................................................................................994.5.2.
Specify the Path of PACSDK library and header files .................................................1004.5.3.
Add the Control to the Form......................................................................................1034.5.4.
Add the Event Handling for the Control ....................................................................1064.5.5.
Upload the Application to WinPAC ............................................................................1084.5.6.
Execute the Application on WinPAC ..........................................................................1104.5.7.
5. APIs and Demo Programs ..................................................................................................................111
5.1. PAC Standard APIs..............................................................................................................112
VB.NET Demo Programs for PAC Standard APIs ........................................................1135.1.1.
C# Demo Programs for PAC Standard APIs ................................................................1145.1.2.
Visual C++ Demo Programs for PAC Standard APIs....................................................1155.1.3.
5.2. PAC IO APIs.........................................................................................................................116

WP-2000-CE7 Series (WinCE7 Based) User Manual v 1.0.4 Page: 5
VB.NET Demo Programs for PAC Standard APIs ........................................................1175.2.1.
C# Demo Programs for PAC Standard APIs ................................................................1185.2.2.
Visual C++ Demo Programs for PAC Standard APIs....................................................1195.2.3.
6. I/O Modules and SDK Selection.........................................................................................................120
7. WP-2000-CE7 Updates.......................................................................................................................123
7.1. OS Updates ........................................................................................................................124
OS Updates using Eshell.............................................................................................1257.1.1.
OS Updates using micro_SD.......................................................................................1287.1.2.
7.2. SDK Updates.......................................................................................................................130
SDK Updates for VB.NET or C#...................................................................................1317.2.1.
SDK Updates for C++..................................................................................................1327.2.2.
Appendix. A. Tips –How to........................................................................................................................133
A.1. How to Online Debug the WP-2000-CE7 Program.....................................................................134
A.2. How to Automatically Synchronize WinPAC Clock .....................................................................139
A.3. How to use User Account Control in WinPAC.............................................................................141
A.3.1. How to Create an User Account ......................................................................................142
A.3.2. How to Use Telnet to remote login the WinPAC from PC................................................144
A.3.3. How to Remove a User Account from the Login List.......................................................146
A.4. How to change the battery.........................................................................................................147
A.5. How to Using the Practical Functions of the 3G/4G I/O Module...............................................149
A.5.1. How to Auto Dial 3G/4G GPRS network and redial when the network disconnected....150
A.5.2. How to Use the SMS Function and Get the GPS Data.....................................................151
A.5.3. How to Synchronize the System Time by GPS Data.........................................................152
Appendix. B. XV-Board Modules................................................................................................................153
Appendix. C. Revision History....................................................................................................................154

WP-2000-CE7 Series (WinCE7 Based) User Manual v 1.0.4 Page: 6
1. Introduction
This chapter provides an overview of the WP-2000-CE7 series modules and its components, and
introduces the fundamental concepts for user familiar.
The WP-2000-CE7 series modules are equipped a Cortex-A8 CPU (1 GHz) and running a windows CE.NET
7.0 operating system. The optional I/O expansion board, XV-board, provides high-protection I/O. Using
the built-in Flash and microSD, the WP-2000-CE7 series modules can save application program, image
file and data.
The 4G module of WP-2241MX-4GC-CE7 work on frequencies of WCDMA 900/2100 MHz, TDSCDMA
1900/2100 MHz, CDMA2000 (BC0) 800 MHz, FDD LTE:B1/B3/B8, TDD LTE: B38/B39/B40/B41 and GSM
850/900/1800/1900 MHz.
The 4G module of WP-2241MX-4GE-CE7 work on frequencies of WCDMA 2100/1900/900/850 MHz, FDD
LTE:B1/B3/B5/B7/B8/B20 and GSM 850/900/1800/1900 MHz.
These modules utilize the 4G and 3G network for convenient and inexpensive data transfer from remote
instruments, meters, computers or control systems in either live data or packet data. This module has
the integrated TCP/IP stack so that even simple controllers with serial communications ports can be
connected to the modem without the need for special driver implementation. With the features of theirs,
the systems can be SMS and GPRS and 4G or 3G connection applications with our PAC.

WP-2000-CE7 Series (WinCE7 Based) User Manual v 1.0.4 Page: 7
1.1. Features
The WP-2000-CE7 series modules offer the most comprehensive configuration and remote system
upgrade solutions to meet specific application requirements. The following list shows the hardware and
software features designed to simplify installation, configuration and application.
Windows Embedded Compact 7.0
Support PC based software: Visual Studio.NET
Web server, FTP server, Telnet server
Local I/O and Communication Expansion Board
WP-2000-CE7 series module is equipped with an I/O expansion bus to support one optional
expansion board, called XV-board. It can be used to implement various I/O functions such as DI, DO,
A/D, D/A, Timer/Counter
For more information about these available expansion boards, please refer to
http://www.icpdas.com/root/product/solutions/hmi_touch_monitor/touchpad/xv-board_selection
.html

WP-2000-CE7 Series (WinCE7 Based) User Manual v 1.0.4 Page: 8
Various Memory Expansions
WP-2000-CE7 series module provides various memory storage options, such as
FRAM and microSD. Customers can choose the memory based on their
characteristics.
16 KB FRAM: no limit on the number of write-erase cycles.
microSD/microSDHC: to implement portable data logging applications; supports up to 32 GB.
Unique 64-bit Hardware Serial Number to Protect Your Program
A unique 64-bit serial number is assigned to each hardware device to
protect your software against piracy.
Remote I/O Module and Expansion Unit
With the built-in RS-485 and Ethernet port, the WP-2000-CE7 series modules can connect
RS-485/Ethernet remote I/O units (RU-87Pn/ET-87Pn) or modules (I-7000/M-7000/ET-7000).
RS-232/RS-485
I-7000
M-7000
RU-87Pn
Etherne
t
ET-7000
I-8KE4

WP-2000-CE7 Series (WinCE7 Based) User Manual v 1.0.4 Page: 9
Plastic and Metal Housing
The WP-2000-CE7 series modules come with the metal casing.
Highly Reliable Under Harsh Environment
Our WP-2000-CE7 series modules operate in a wide range of temperature and humidity.
Operating Temperature: -25 ~ +75 °C
Storage Temperature: -40 ~ +80 °C
Humidity: 10% ~ 90% RH, non-condensing

WP-2000-CE7 Series (WinCE7 Based) User Manual v 1.0.4 Page: 10
1.2. Specifications
The table below summarizes the specifications of the WP-2000-CE7 series module.
WP-2241M-CE7 and WP-2241MX-CE71.2.1.
Models
WP-2241M-CE7
WP-2241MX-CE7
System Software
OS
Windows CE 7.0 Professional
Framework Support
.Net Compact Framework 3.5
Embedded Service
FTP Server, Web Server
SDK Provided
Dll for Visual Studio.Net 2008
Multilanguage Support
English, German, French, Spanish, Russian, Italian, Korean, Simplified
Chinese, Traditional Chinese
CPU Module
CPU
Cortex-A8, 1 GHz
DDR3 SDRAM
512 MB
Flash
256 MB
FRAM
64 KB
Expansion Flash Memory
microSD socket with one 4 GB microSD card
(support up to 32 GB microSDHC card)
RTC (Real Time Clock)
Provide second, minute, hour, date, day of week, month, year
64-bit Hardware Serial Number
Yes, for software copy protection
Dual Watchdog Timers
Yes
Rotary Switch
Yes (0 to 9)
LED Indicators
1 LED for Power, 1 LED for Running, 1 LED for mobile network and 3 LEDs
for user defined
VGA & Communication Ports
Resolution
640 x 480, 800 x 480, 800 x 600, 1024 x 768
Ethernet
RJ-45 x 2, 10/100/1000 Base-TX
(Auto-negotiating, Auto MDI/MDI-X, LED indicators)
USB 2.0
2
COM 1
RS-232 (RxD, TxD, and GND); Non-isolated
COM 2
RS-232 (RxD, TxD, and GND); Non-isolated
COM 3
RS-485 (Data+, Data-); 2500 VDC isolated
COM 4
RS-485 (Data+, Data-); 2500 VDC isolated

WP-2000-CE7 Series (WinCE7 Based) User Manual v 1.0.4 Page: 11
Models
WP-2241M-CE7
WP-2241MX-CE7
I/O Expansion
I/O Expansion Bus
Yes, one optional XV-board
4G Expansion Bus
-
Yes
Mechanical
Dimensions (W x H x D)
35 mm x 167 mm x 119 mm
Housing
Metal
Installation
DIN-rail mounting
Environmental
Operating Temperature
-25 °C to +75 °C
Storage Temperature
-40 °C to + 80 °C
Ambient Relative Humidity
10 % to 90 % RH (non-condensing)
Power
Input Range
+12 VDC to +48 VDC
Consumption
4.8 W (0.2 A @ 24 VDC)

WP-2000-CE7 Series (WinCE7 Based) User Manual v 1.0.4 Page: 12
WP-2241MX-4GC-CE7 and WP-2241MX-4GE-CE71.2.2.
Models
WP-2241MX-4GC-CE7
WP-2241MX-4GE-CE7
System Software
OS
Windows CE 7.0 Professional
Framework Support
.Net Compact Framework 3.5
Embedded Service
FTP Server, Web Server
SDK Provided
Dll for Visual Studio.Net 2008
Multilanguage Support
English, German, French, Spanish, Russian, Italian, Korean, Simplified
Chinese, Traditional Chinese
CPU Module
CPU
Cortex-A8, 1 GHz
DDR3 SDRAM
512 MB
Flash
256 MB
FRAM
64 KB
Expansion Flash Memory
microSD socket with one 4 GB microSD card
(support up to 32 GB microSDHC card)
RTC (Real Time Clock)
Provide second, minute, hour, date, day of week, month, year
64-bit Hardware Serial Number
Yes, for software copy protection
Dual Watchdog Timers
Yes
Rotary Switch
Yes (0 to 9)
LED Indicators
1 LED for Power, 1 LED for Running, 1 LED for mobile network and 3 LEDs
for user defined
VGA & Communication Ports
Resolution
640 x 480, 800 x 480, 800 x 600, 1024 x 768
Ethernet
RJ-45 x 2, 10/100/1000 Base-TX
(Auto-negotiating, Auto MDI/MDI-X, LED indicators)
USB 2.0
2
COM 1
RS-232 (RxD, TxD, and GND); Non-isolated
COM 2
RS-232 (RxD, TxD, and GND); Non-isolated
COM 3
RS-485 (Data+, Data-); 2500 VDC isolated
COM 4
RS-485 (Data+, Data-); 2500 VDC isolated
I/O Expansion
I/O Expansion Bus
Yes, one optional XV-board
4G Expansion Bus
Yes

WP-2000-CE7 Series (WinCE7 Based) User Manual v 1.0.4 Page: 13
Models
WP-2241MX-4GC-CE7
WP-2241MX-4GE-CE7
Mechanical
Dimensions (W x H x D)
35 mm x 167 mm x 119 mm
Housing
Metal
Installation
DIN-rail mounting
Environmental
Operating Temperature
-25 °C to +75 °C
Storage Temperature
-40 °C to + 80 °C
Ambient Relative Humidity
10 % to 90 % RH (non-condensing)
Power
Input Range
+12 VDC to +48 VDC
Consumption
4.8 W (0.2 A @ 24 VDC)
GSM
Frequency Band
GSM: 850/900/1800/1900 MHz
GPRS Connectivity
GPRS class 12/10, GPRS station class B
Data GPRS
Downlink transfer: Max. 85.6 kbps, Uplink transfer: Max 42.8 kbps
3G System
Frequency Band
WCDMA 900/2100, TD-SCDMA
1900/2100, CDMA2000 (BC0) 800 MHz
WCDMA 850/900/2100 MHz
Data Transmission
DC-HSPA+ Download: Max. 42 Mbps, Upload: Max 5.76 Mbps; TD-SCDMA
Download: Max. 4.2 Mbps, Upload: Max 2.2 Mbps; CDMA2000 EVDO Download:
Max. 14.7 Mbps, Upload: Max 5.4 Mbps
4G System
Frequency Band
FDD LTE: B1/B3/B8, TDD LTE:
B38/B39/B40/B41 MHz
FDD LTE: B1/B3/B5/B7/B8/B20 MHz
Data Transmission
Download Max: 100 Mbps, Upload: Max 50 Mbps

WP-2000-CE7 Series (WinCE7 Based) User Manual v 1.0.4 Page: 14
1.3. Overview
WP-2000-CE7 series module is equipped with several interfaces and peripherals that can be integrated
with external systems. Here is an overview of the components and its descriptions.
Front View
Item
Description
LED Indicators
The WP-2000-CE7 series module has 6 LED indicators shown as below.
LED Indicator
Color
Meaning
RUN
Green
Power on and OS is running
PWR
Red
Power is on.
L1
Green
User programmable LED indicator.
L2
Orange
L3
Red
LED Indicators
USB Port x 2
microSD Card Socket
Pin Assignment
XV-Board Slot
Ethernet Port x 2

WP-2000-CE7 Series (WinCE7 Based) User Manual v 1.0.4 Page: 15
Item
Description
Ethernet Port
The WP-2000-CE7 series module has an Ethernet port
that can be connected to a computer or device via an
Ethernet cable.
The Link/Act and 1G LED indicators display the status of
the WP-2000-CE7 series module. The details are shown
as below.
LED Indicator
State (Color)
Meaning
1G
ON (Orange)
Network Speed: 1 G
OFF
Network Speed: 10/100 M
Link/Act
ON (Green)
The Link is active
OFF
The Link is inactive
Blinking(Green)
Network activity
USB Port
The WP-2000-CE7 series module has two USB 2.0 port
that allows support for the USB devices such as mouse,
keyboard or an external USB hard drive.
microSD Card
Socket
The microSD socketcan be used to restore the WP-2000-CE7 series module
system and expand the memory up to 32 GB.
XV-Board Slot
The XV-board slot can be used to support up to one XV-board service.

WP-2000-CE7 Series (WinCE7 Based) User Manual v 1.0.4 Page: 16
Item
Description
Pin Assignment
Pin
Signal
Description
1
TxD
COM1 (RS-232)
2
RxD
3
GND
4
TxD
COM2 (RS-232)
5
RxD
6
GND
7
D+
COM3 (RS-485)
8
D-
9
ISO.GND
10
D+
COM4 (RS-485)
11
D-
12
ISO.GND

WP-2000-CE7 Series (WinCE7 Based) User Manual v 1.0.4 Page: 17
Top View
Item
Description
Antenna Connector
(for WP-2241M-4GC-CE7 and WP-2241M-4GE-CE7 only)
The WP-2241M-4GC-CE7 and WP-2241M-4GE-CE7 has an antenna connector
that can be used to connect the antenna.
VGA Port
A VGA connector is a 3-row 15-pin connector that can be used with a variety
of supported VGA resolutions, and the output resolution covers 640x480,
800x480, 800x600, 1024x768.
Rotary Switch
Rotary Switch is an operating mode selector switch which provides seven
functions related to the selection of the operating mode.
Power Input and
Frame Ground
The WP-2000-CE7 series modules has a terminal with 3pins, there are 2 pins
for power input and a pin for frame ground as follows:
Rotary Switch
VGA Port
Power Input and
Frame Ground
Power Input
Antenna Connector

WP-2000-CE7 Series (WinCE7 Based) User Manual v 1.0.4 Page: 18
1.4. Dimensions
The diagrams below provide the dimensions of the WP-2000-CE7 series modules to use in defining your
enclosure specifications. Remember to leave room for potential expansion if you are using other
components in your system.
All dimensions are in millimeters.

WP-2000-CE7 Series (WinCE7 Based) User Manual v 1.0.4 Page: 19
2. Getting Started
This chapter provides a guided tour of the WP-2000-CE7 series modules installation and configuration
that describes the steps needed to download, install, configure, and run the basic procedures for user
working with the WP-2000-CE7 series modules for the first time.
Before starting any task, please check the package contents. If any of the following package contents are
missing or damaged, contact your dealer, distributor.
WP-2000-CE7
WP-2000-CE7 Series
Quick Start Guide
A microSD card and
a micro SD/SD adapter
Screw Driver
(1C016) 2.4 mm
44 mm DIN-Rail Clip
M3x6L Screw * 4
Wire Terminal * 16
GSM/GPRS External
Antenna (ANT-421-04)
The following items are included with mobile network expansion card

WP-2000-CE7 Series (WinCE7 Based) User Manual v 1.0.4 Page: 20
2.1. Mounting the Hardware
The WP-2000-CE7 series module has simple rail clips for mounting reliably on a standard 44 mm DIN rail.
Step 1: Mounting WP-2000-CE7 onto a 44 mm DIN rail