ICP DAS USA LP-9821 User manual

Quick Start
For LP-9x21
English/ October 2016/ Version 1.1
What’s in the shipping
package?
The package includes the following items:
Quick Start
A microSD card and a
micro SD/SD ada
p
ter Software CD
LP-9x21 (This Document)
RJ-45 Waterproof M3x6L Screw*8 44 mm DIN-Rail Screw Driver
Assembly Clip * 2 2.4 mm
Preparations for devices
1. Power Supply: +10 ~ +30 VDC. (Ex: DP-665)
2.
Ethernet Hub. (Ex: NS-205)
3. Make sure your PC has workable serial port and network settings.
1
LP-9x21 Quick Start

Hardware Introduction
LP-9821
LP-9421
LP-9221
2
LP-9x21 Quick Start

Console/Ethernet
Connection
Console
1. Connect both the LP-9x2x and your computer through the
“Console” or “LAN 1/2”. User can choose the terminal software (ex
Putty or others) to connect the LP-x2x.
2. If user chose the COM1 (“Console”), user can set the baud rate
“115200” to connect the device.
Fig 4-1 Console Connection
3
LP-9x21 Quick Start

3. If user used the LAN 1/2, user can refer to below default network
configuration, then using the terminal software (ex Putty or others)
to connect the LP-9000.
IP 192.168.0.1
LAN1 Netmask 255.255.255.0
IP 192.168.0.2
LAN2
Netmask 255.255.255.0
Fig 4-2 SSH Connection
4. After user connect to the LP-9000, user can input default ID “root”
and password “icpdas” to login.
Network Configuration
1. After user follow step 4 “Console/Ethernet Connection” to connect to
the device bash terminal, user can change the default network
setting.
2. If user want to change the network configuration, user can use the
linux command “vi” to modify the configuration file
“/etc/network/interfaces”.
4
LP-9x21 Quick Start

3. Using the ‘#’ to mark the default configuration. Please refer to the
Fig 5-1:
Fig 5-1 network configuration
4. After user save the file and reboot device, user can use the new
network configuration to connect to the LP-9x2x.
Application Support
1. Web Server
The web server daemon “apache2” has been built in the LP-9x2x
and it will be started automatically at boot time.
5
LP-9x21 Quick Start

2. Software Package Manager
The “apt-get” utility is a package manager used to download and
install packages from local package repositories or ones located in
the Internet.
3. XFCE GUI Desktop
LP-9x2x provides the XFCE package, after user type “root” to login,
the local terminal would execute the XFCE Desktop.
Product Related Information
LinPAC-9000 Product Page:
http://www.icpdas.com/root/product/solutions/pac/linpac/linpac-9000_introduction.html
LinPAC-9x2x Document Download:
http://ftp.icpdas.com/pub/cd/linpac/napdos/lp-9x2x/user_manual/
LinPAC-9x2x Software Download:
http://ftp.icpdas.com/pub/cd/linpac/napdos/lp-9x2x/sdk/
NS-205 and DP-665 Product Page (optional):
http://www.icpdas.com/products/Switch/industrial/ns-205.htm
http://www.icpdas.com/products/Accessories/power_supply/dp-665.htm
ICP DAS Web Site: http://www.icpdas.com
Contact Us (E-Mail): [email protected] , [email protected]
Copyright @ 2016 by ICP DAS Co., Ltd. All Rights Reserved. 6