ICP DAS USA TPD-283U-M1 User manual

TPD-283U-Mx 2.8” TouchPAD - QuickStart (May/2017)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
1
TPD-283U-Mx
2.8'' Touch Screen HMI Controller,
communicable over Modbus TCP and Ethernet
Quick Start Guide
Product Website:
https://www.icpdas-usa.com/tpd_283u_m1
1. Introduction
This quick start manual will guide users to implement the TPD-283U-Mx modules
into their applications in a quick and easy way. This will only provide with the basic
instructions. For the more detailed information, please refer to the TPD-283U user’s
manual located on the ICPDAS CD-ROM or from ICP DAS web site:
http://www.icpdas-usa.com/documents/user-manual-TPD-283U-H.pdf
The ICP DAS TouchPAD is a tiny touch screen controller (electrical switch) HMI which
is designed for building and home automation. TPD-283U-Mx is equipped with a high
resolution TFT color touch screen and fits in regular electrical wall-mount outlets.

TPD-283U-Mx 2.8” TouchPAD - QuickStart (May/2017)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
2
2. Wirings

TPD-283U-Mx 2.8” TouchPAD - QuickStart (May/2017)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
3

TPD-283U-Mx 2.8” TouchPAD - QuickStart (May/2017)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
4
3. Install HMIWorks
Follow the steps to install the HMIWorks.
4. Setup Device
Step1. Before downloading programs to the TPD-283U, be sure to setup
TPD-283U first. Run HMIWorks_Standard.exe and click on the menu:
Run >> Setup Device.

TPD-283U-Mx 2.8” TouchPAD - QuickStart (May/2017)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
5
Step 2. In the “Setup Ethernet device” dialog box, click the “search for TouchPAD”
button to open “search for TouchPAD” dialog box.

TPD-283U-Mx 2.8” TouchPAD - QuickStart (May/2017)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
6
Step 3: If the TouchPAD device is found and displayed in the list on the “Search for
TouchPAD” dialog box, select the TouchPAD item depend on MAC Address of your
TouchPAD device and click the “OK” button to bring the information back to the
“Setup Ethernet Device” dialog box.
Note: You can find the MAC address on the back of the TouchPAD.

TPD-283U-Mx 2.8” TouchPAD - QuickStart (May/2017)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
7
Step 4: In the “Setup Ethernet Device” dialog box, select the “DHCP”,
“Static IP” or “Runtime Setting” (e.g., DHCP) in the “IP Address Assignment Method”
field.
Notes:
1. When using “Static IP” or “DHCP”, the IP settings are stored as a part of the
program image, and only successful downloading can update the IP settings.
2. When using “Runtime Setting”, the program image has no information about the IP
settings, and TouchPAD loads the IP information from the flash at the runtime.
Before IP settings are used, be sure to set the IP settings into the flash by the
related API functions. We have demo to do this as well.

TPD-283U-Mx 2.8” TouchPAD - QuickStart (May/2017)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
8
Step 5: Verify that “Host IP Address” and “TouchPAD IP Address” in the same
subnet.
Step 6: Verify that “TouchPAD MAC Address” must match the MAC Address of
your TouchPAD device, and click the “OK” button.
Note: Verify that the new project has been created (see Section 3.2 “Create a New
Project in the HMIWorks”).

TPD-283U-Mx 2.8” TouchPAD - QuickStart (May/2017)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
9
Step 7: Click the “Run (Build & Download) F9” item from the “Run (Build & Download)”
menu, or press F9.
Step 8: The “Download in progress…” dialog box will be displayed showing the
progress of the
update.
Step 9: The TouchPAD device will then execute the string “Hello TouchPAD!” sample.