ICP DAS USA VPD Series User manual

TPD/VPD Series HMI Device User Manual
TouchPAD
Version 1.3.2, Aug. 2017
WARRANTY
All products manufactured by ICP DAS are warranted
against defective materials for a period of one year from
the date of delivery to the original purchaser.
WARNING
ICP DAS assumes no liability for damages consequent to
the use of this product. ICP DAS reserves the right to
change this manual at any time without notice. The
information furnished by ICP DAS is believed to be
accurate and reliable. However, no responsib
ility is
assumed by ICP DAS for its use, nor for any infringements
of patents or other rights of third parties resulting from
its use.
COPYRIGHT
Copyright © 2017 by ICP DAS. All rights are reserved.
TRADEMARKS
Names are used for identification purposes only and may
be registered trademarks of their respective companies.
CONTACT US
If you have any questions, please feel free to contact us
via email at:
[email protected], service.[email protected]om

TPD/VPD Series HMI Device User Manual
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved.Page: 2
TABLE OF CONTENTS
PREFACE...................................................................................................................................................................... 4
1. INTRODUCTION ..................................................................................................................................................... 5
1.1 FEATURES.............................................................................................................................................................. 6
1.2 MODULE NAMING CONVENTION ............................................................................................................................... 7
1.3 SELECTION GUIDE ................................................................................................................................................... 8
1.3.1 TPD Series Models......................................................................................................................................... 8
1.3.2 VPD Series Models....................................................................................................................................... 10
1.4 SPECIFICATIONS .................................................................................................................................................... 12
1.4.1 TPD-280/280U/283/283U........................................................................................................................... 12
1.4.2 TPD-280-H/280U-H/280-Mx/283-H/283-Mx/283U-H/283U-Mx................................................................ 13
1.4.3 TPD-430/430-EU/433/433-EU .................................................................................................................... 14
1.4.4 TPD-430-H/430-H-EU/433-H/433-H-EU...................................................................................................... 15
1.4.5 TPD-432F/433F/433F-H/433-M2 ................................................................................................................ 16
1.4.6 TPD-703/703-64.......................................................................................................................................... 17
1.4.7 VPD-130/130N/132/132N/133/133N......................................................................................................... 18
1.4.8 VPD-130-H/130N-H/132-H/132N-H/133-H/133N-H................................................................................... 19
1.4.9 VPD-142/142N/143/143N .......................................................................................................................... 20
1.4.10 VPD-173N/173N-64/173X/173X-64 ....................................................................................................... 21
2. HARDWARE INFORMATION .................................................................................................................................22
2.1 APPEARANCE ....................................................................................................................................................... 22
2.1.1 TPD-280/283 Series Models ........................................................................................................................ 22
2.1.2 TPD-280-Mx/283-Mx/283U-Mx Series Models........................................................................................... 25
2.1.3 TPD-430/433 Series Models ........................................................................................................................ 27
2.1.4 TPD-432F/433F Series Models..................................................................................................................... 29
2.1.5 TPD-703/703-64 Series Models................................................................................................................... 31
2.1.6 VPD-130/130N Series Models ..................................................................................................................... 33
2.1.7 VPD-132/132N/133/133N Series Models ................................................................................................... 35
2.1.8 VPD-142/142N/143/143N Series Models ................................................................................................... 37
2.1.9 VPD-173N/173X Series Models ................................................................................................................... 39
2.2 PIN ASSIGNMENTS ................................................................................................................................................ 41
2.2.1 TPD-280/283/430/433 Series Models ......................................................................................................... 41
2.2.2 TPD-432F Model.......................................................................................................................................... 42
2.2.3 TPD-433F Series Models.............................................................................................................................. 43
2.2.4 TPD-703 Series Models................................................................................................................................ 44

TPD/VPD Series HMI Device User Manual
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved.Page: 3
2.2.5 VPD-130 Series Models ............................................................................................................................... 45
2.2.6 VPD-132/133 Series Models........................................................................................................................ 46
2.2.7 VPD-142/143 Series Models........................................................................................................................ 47
2.2.8 VPD-173N/173X Series Models ................................................................................................................... 48
2.3 DIMENSIONS........................................................................................................................................................ 49
2.3.1 TPD-280/283 Series Models ........................................................................................................................ 49
2.3.2 TPD-430/432/433/703 Series Models ......................................................................................................... 51
2.3.3 VPD-130/132/133 Series Models ................................................................................................................ 54
2.3.4 VPD-142/143/173N Series Models.............................................................................................................. 55
2.4 MOUNTING THE HARDWARE................................................................................................................................... 57
2.4.1 Wall Mounting ............................................................................................................................................ 57
2.4.2 DIN-Rail Mounting ...................................................................................................................................... 60
2.4.3 Panel Mounting........................................................................................................................................... 61
2.4.4 XV-boards Assembly on the VPD Series....................................................................................................... 63
3. GETTING STARTED ...............................................................................................................................................65
3.1 OBTAINING/INSTALLING THE HMIWORKS SOFTWARE .................................................................................................. 65
3.2 CREATE A NEW PROJECT IN THE HMIWORKS ............................................................................................................. 66
3.3 SUPPLY POWER TO THE TOUCHPAD .................................................................................................................................. 69
3.3.1 DC Power Supply ......................................................................................................................................... 69
3.3.2 PoE Power Supply........................................................................................................................................ 70
3.4 DOWNLOADING METHODS FOR TOUCHPAD .............................................................................................................. 71
3.4.1 Setup RS-485-downloaded Devices ............................................................................................................. 71
3.4.2 Setup Ethernet-downloaded Devices .......................................................................................................... 77
3.4.3 Setup USB-downloaded Devices.................................................................................................................. 85
4. CALIBRATIONS ......................................................................................................................................................94
5. CONNECTING TO I/O DEVICES.............................................................................................................................96
5.1 ACCESS A MODBUS TCP SLAVE DEVICE..................................................................................................................... 96
5.2 ACCESS A MODBUS RTU SLAVE DEVICE .................................................................................................................. 100
5.3 CONNECTING TO I/O EXPANSION BOARDS (XV-BOARD)............................................................................................. 104
APPENDIX: REVISION HISTORY.............................................................................................................................108

TPD/VPD Series HMI Device User Manual
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved.Page: 4
Preface
Thank you for buying TPD/VPD Series HMI Devices, TouchPADs, which are made by ICP DAS Co., Ltd.
We suggest you read through this user manual before you set up these devices and develop their
programs.
SUPPORT
This manual relates to the following modules:
TPD Series Models TPD-280, TPD-280U, TPD-283, TPD-283U, TPD-430, TPD-430-EU, TPD-433,
TPD-433-EU, TPD-432F, TPD-433F
TPD High Speed
Series Models
TPD-280-H, TPD-280U-H, TPD-283-H, TPD-280-M1, TPD-280-M2,
TPD-280-M3, TPD-283-M1, TPD-283-M2, TPD-283-M3, TPD-283U-M1,
TPD-283U-M2, TPD-283U-M3, TPD-430-H, TPD-433-H, TPD-433F-H,
TPD-433-M2, TPD-703, TPD-703-64
VPD Series Models VPD-130, VPD-130N, VPD-132, VPD-132N, VPD-133, VPD-133N, VPD-142,
VPD-142N, VPD-143, VPD-143N
VPD High Speed
Series Models
VPD-130-H, VPD-130N-H, VPD-132-H, VPD-132N-H, VPD-133-H,
VPD-133N-H, VPD-142-H, VPD-142N-H, VPD-143-H, VPD-143N-H
VPD-173N , VPD-173N-64, VPD-173X , VPD-173X-64
PURPOSE
This manual shows how to use TouchPADs and develop programs.
This manual mainly contains the following parts:
Introduction: basic understandings of TouchPADs.
Hardware: specifications, dimensions, and installations.
Software: mainly how to build a project and HMIWorks introductions.
PERSONNEL
This manual is fit for following personnel:
End Users
Engineers
Technicians

TPD/VPD Series HMI Device User Manual
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved.Page: 5
1. Introduction
Our solution for HMI (Human Machine Interface) is composed of GUI (Graphical User Interface)
based touch screens and an integrated software development package. ICP DAS hears the voices
of our customers and is dedicated to providing a series of solutions particularly for intelligent
building, equipment monitoring, factory automation and automatic controls. Its development
software, HMIWorks, provides plenty of widgets and a variety of templates. Combined with the high
resolution color touch screen of the TouchPAD series, a GUI can be realized with your own unique
fashion and style. Development is no longer difficult and project accomplishment is within reach.
ICP DAS provides two types of touch HMI devices, the TPD series and the VPD series. The TPD series
is designed for home/building automation applications and the VPD series is designed for
factory/machine automation applications. Both have many common features, such as a
high-resolution touch screen, RTC, and a variety of communication interfaces, including
RS-232/RS-485, Ethernet, USB. However, each still has its own specific features for its respective
target applications. For the TPD series, you can use an external wall box to help you smoothly blend
the TPD series device into your decoration. For the VPD series, the rubber keypad, IP-65 waterproof
front panel and DIN-Rail/panel mounting are designed for harsh environment, and are especially
suitable for factories.

TPD/VPD Series HMI Device User Manual
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved.Page: 6
1.1 Features
Excellent C/P ratio (cost/performance)
High-Color high-resolution resolution touch screen
PoE, Power over Ethernet (PoE)
RS-485 network (including SelfTuner)/RS-232 (3 pins)
RTC (Real Time Clock)
Buzzer
Rubber Keypad (Option for VPD Series)
Graphical user interface designer
Free development tool: HMIWorks
Support the C language and Ladder Designer
Support user-defined third party protocol (C language)
Modbus Protocol enables remote control of I/O modules and integration with SCADA software
ESD Protection: 4 kV
Waterproofed Front Panel (VPD: IP65, TPD: IP40)
Operating temperature: -20 ~ 50 oC (2.8”: -20 ~ 70 oC, 7”: -10 ~ 60 oC)

TPD/VPD Series HMI Device User Manual
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved.Page: 7
1.2 Module Naming Convention
There are many different products available, and sometimes it is difficult to remember the
specifications for any given product. However, if you take a few minutes to understand the module
naming conventions, it may save your time and prevent confusion. The figure below shows how the
module naming conventions work for each TPD/VPD series product.
Touch Screen Size Communication Interface Special
28: 2.8 inch
43: 4.3 inch
70: 7.0 inch
For 2.8 inch:
0: RS-485
0U: RS-485 + RTC
3: Ethernet
3U: RS-485 + RTC +
Ethernet
For 4.3 inch:
0: RS-485
2: RS-485 x 2
3: RS-485/RS-232
+ Ethernet
(F): Flat Type
For 7.0 inch:
3: Ethernet
+RTU
EU: For European 86 x 86 mm
Outlet Box
H: High Speed Version
M1 ~ M3: Multi Panel
64: 64 MB SDRAM/64 MB Flash
Form Factor Touch Screen Size Communication Interface Special
1: 103 x 103 mm Panel Mount 3: 3.5 inch
4: 4.3 inch
7: 7 inch
0: RS-485
2: RS-232/RS-485 + RS-485
3: RS-232/RS-485 + RS-485 +
Ethernet
(N): No Rubber Keypad
H: High Speed Version
64: 64 MB SDRAM/64
MB Flash

TPD/VPD Series HMI Device User Manual
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved.Page: 8
1.3 Selection Guide
1.3.1 TPD Series Models
2.8” (Resolution: 240 x 320)
Model Extra
Flash
Image Storage
Capacity
Ethernet COM Port RTC Outlet
Box
External
Wall Box
Power Input
TPD-280 - 1 - 1 x RS-485 -
OB120 EWB-T28
+10 ~ +30 VDC
TPD-283 - 1 Yes - - PoE
TPD-280U 8 MB 54 - 1 x RS-485 Yes +10 ~ +30 VDC
TPD-283U 8 MB 54 Yes 1 x RS-485 Yes +10 ~ +30 VDC or PoE
2.8” (Resolution: 240 x 320)
Model Extra
Flash
Image
Storage
Capacity
Ethernet COM Port RTC Outlet
Box
External
Wall Box
Power Input Multi
Panel
TPD-280-H - 4 - 1 x RS-485 -
OB120 EWB-T28
+12 ~ +48 VDC
TPD-283-H - 4 Yes - - PoE -
TPD-280U-H 16 MB 108 - 1 x RS-485 Yes +12 ~ +48 VDC -
TPD-283U-H 16 MB 108 Yes 1 x RS-485 Yes +12 ~ +48 VDC or
PoE -
TPD-280-Mx - 4 - 1 x RS-485 -
- -
+12 ~ +48 VDC Yes
TPD-283-Mx - 4 Yes - - PoE Yes
TPD-283U-Mx 16 MB 108 Yes 1 x RS-485 Yes +12 ~ +48 VDC or
PoE Yes
4.3” (Resolution: 480 x 272)
Model Extra
Flash
Image
Storage
Capacity
Ethernet COM Port RTC Outlet
Box
External
Wall Box
Power Input
TPD-430 8 MB 32 - 1 x RS-485 Yes OB140 EWB-T43 +10 ~ +30 VDC
TPD-433 8 MB 32 Yes 1 x RS-485 Yes +10 ~ +30 VDC or PoE
TPD-432F 8 MB 32 - 2 x RS-485 Yes OB140F
OB140FP EWB-T43F
+10 ~ +30 VDC
TPD-433F 8 MB 32 Yes 1 x RS-232
1 x RS-485 Yes +10 ~ +30 VDC or PoE
TPD-430-EU 8 MB 32 - 1 x RS-485 Yes - - +10 ~ +30 VDC
TPD-433-EU 8 MB 32 Yes 1 x RS-485 Yes +10 ~ +30 VDC or PoE

TPD/VPD Series HMI Device User Manual
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved.Page: 9
4.3” (Resolution: 480 x 272)
Model Extra
Flash
Image
Storage
Capacity
Ethernet COM Port RTC Outlet
Box
External
Wall Box
Power Input Multi
Panel
TPD-430-H 16 MB 32 - 1 x RS-485 Yes
OB140F
OB140FP EWB-T43F
+12 ~ +48VDC -
TPD-433-H 16 MB 32 Yes 1 x RS-485 Yes +12 ~ +48 VDC
or PoE
-
TPD-433F-H
16 MB 64 Yes 1 x RS-232
1 x RS-485 Yes +12 ~ +48 VDC
or PoE
-
TPD-433-M2 Yes
7” (Resolution: 800 x 480)
Model Extra
Flash
Image Storage
Capacity
Ethernet COM Port RTC Outlet
Box
External
Wall Box
Power Input
TPD-703 16 MB 18 Yes 1 x RS-232
1 x RS-485 Yes OB170 EWB-T70 +12 ~ +48 VDC or PoE
TPD-703-64 64 MB 84

TPD/VPD Series HMI Device User Manual
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved.Page: 10
1.3.2 VPD Series Models
3.5” (Resolution: 320 x 240)
Model Extra
Flash
Image
Storage
Capacity
Ethernet COM Port RTC Expansion
I/O
Boards
Rubber
Keypad
Ingress
Protection
Power
Input
VPD-130
8 MB 54
- RS-232/RS-485
Yes
- Yes
Front
Panel:
IP65
+12 ~ +48
VDC
VPD-130N - - -
VPD-132 -
COM1: RS-485
or RS-232
COM2: RS-485
Yes Yes
VPD-132N - Yes -
VPD-133 Yes Yes Yes +12 ~ +48
VDC or PoE
VPD-133N Yes Yes -
3.5” (Resolution: 320 x 240)
Model Extra
Flash
Image
Storage
Capacity
Ethernet COM Port RTC Expansion
I/O
Boards
Rubber
Keypad
Ingress
Protection
Power
Input
VPD-130-H
16
MB 108
-
RS-232/RS-485
Yes Yes
Yes
Front
Panel:
IP65
+12 ~ +48
VDC
VPD-130N-H - -
VPD-132-H -
COM1: RS-485
or RS-232
COM2: RS-485
Yes
VPD-132N-H - -
VPD-133-H Yes Yes +12 ~ +48
VDC or PoE
VPD-133N-H Yes -
4.3” (Resolution: 480 x 272)
Model Extra
Flash
Image
Storage
Capacity
Ethernet COM Port RTC Expansion
I/O
Boards
Rubber
Keypad
Ingress
Protection
Power
Input
VPD-142
8 MB 32
- COM1: RS-485
or RS-232
COM2: RS-485
or RS-232
Yes Yes
Yes
Front
Panel:
IP65
+12 ~ +48
VDC
VPD-142N - -
VPD-143 Yes Yes +12 ~ +48
VDC or PoE
VPD-143N Yes -

TPD/VPD Series HMI Device User Manual
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved.Page: 11
4.3” (Resolution: 480 x 272)
Model Extra
Flash
Image
Storage
Capacity
Ethernet COM Port RTC Expansion
I/O
Boards
Rubber
Keypad
Ingress
Protection
Power
Input
VPD-142-H
16
MB 64
- COM1: RS-485
or RS-232
COM2: RS-485
or RS-232
Yes Yes
Yes
Front
Panel:
IP65
+12 ~ +48
VDC
VPD-142N-H - -
VPD-143-H Yes Yes +12 ~ +48
VDC or PoE
VPD-143N-H Yes -
7” (Resolution: 800 x 480)
Model Extra
Flash
Image
Storage
Capacity
Ethernet COM Port RTC Expansion
I/O
Boards
Rubber
Keypad
Ingress
Protection
Power
Input
VPD-703N 16 MB 18
Yes
COM1: RS-485
or RS-232
COM2: RS-485
or RS-232
Yes
-
-
Front
Panel:
IP65
+12 ~
+48 VDC
or PoE
VPD-703N-64 64 MB 84
VPD-703X 16 MB 18 Yes
VPd-703X-64 64 MB 84
Expansion I/O Boards (Optional XV-boards)
Model
Digital Input (DI)
Digital Output (DO)
Channels
Sink/Source
Contact
Channels
Type
Sink/Source
XV107
8 Source Wet 8 Open Collector Sink/Source
XV107A
8 Sink Wet 8 Open Emitter Source
XV110
16 Sink/Source Wet + Dry - - -
XV111
0 - - 16 Open Collector Sink
XV111A
0 - - 16 Open Emitter Source
XV116
5 Sink/Source Wet 6 Power Relay, Form A -
Model
AI
AO
DI
DO
Channels
Type
Channels
Type
Channels
Type
Channels
Type
XV306 4 Voltage/
Current
- - 4 Wet 4 Relay Form A,
6A
XV307
-
-
2
Voltage/Current
4
4
Sink
XV308
8
Voltage/
Current
-
-
DI+DO = 8
Dry,
Source
DI+DO=8
Sink
XV310
4
2
Voltage/Current
4
4
Source

TPD/VPD Series HMI Device User Manual
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved.Page: 12
1.4 Specifications
Note: Communication interface that is only for run time supports the following protocols:
1. For the case of RS-485, Modbus RTU Master and DCON Protocol Master (for ICP DAS I-7000
series modules) are supported. We provide API functions to open COM Port for sending/receiving
strings through RS-485.
2. For the case of Ethernet, Modbus TCP Master is supported. We provide API functions to
sending/receiving strings through TCP.
3. USB is used for firmware update only.
1.4.1 TPD-280/280U/283/283U
Models
TPD-280
TPD-280U
TPD-283
TPD-283U
CPU Module
CPU
32-bit RISC CPU
Memory Expansion - 16 MB SDRAM /
8 MB Flash
- 16 MB SDRAM /
8 MB Flash
Real Time Clock (RTC) - Yes - Yes
Buzzer
Yes
Rotary Switch (0 ~ 9) Yes
Communication Interface
Ethernet - RJ-45 x 1, 10/100 Base-TX
Serial Port RS-485 (including Self-Tuner) -
RS-485 (including
Self-Tuner)
USB 1.1 Client
-
Firmware update only
-
Firmware update only
MMI (Main Machine Interface)
LCD
2.8 TFT (Resolution 240 x 320 x 16), defective pixels <= 3
Backlight Life 20,000 hours
Brightness
160 cd/m2
Touch Panel Yes
Reset Button
Yes
Electrical
Powered from Terminal Block
+10 ~ +30 V
DC
-
+10 ~ +30 V
DC
Powered from PoE - IEEE 802.3af, Class1 (48 V)
Power Consumption
1.2 W
Mechanical
Dimensions (W x L x H)
(Unit: mm) 119 x 76 x 33 119 x 76 x 32 119 x 76 x 33
Installation
Wall Mounting
Ingress Protection Front Panel: IP40
Environmental
Operating Temperature -20 ~ +70°C
Storage Temperature
-30 ~ +80°C
Ambient Relative Humidity 10 ~ 90% RH, non-condensing

TPD/VPD Series HMI Device User Manual
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved.Page: 13
1.4.2 TPD-280-H/280U-H/280-Mx/283-H/283-Mx/
283U-H/283U-Mx
Models TPD-280-H
TPD-280-Mx
TPD-280U-H TPD-283-H
TPD-283-Mx
TPD-283U-H
TPD-283U-Mx
CPU Module
CPU 32-bit RISC CPU
Memory Expansion - 16 MB SDRAM /
16 MB Flash
- 16 MB SDRAM /
16 MB Flash
Real Time Clock (RTC) - Yes - Yes
Buzzer Yes
Rotary Switch (0 ~ 9) Yes
Communication Interface
Ethernet - RJ-45 x 1, 10/100 Base-TX
Serial Port RS-485 (including Self-Tuner) -
RS-485 (including
Self-Tuner)
USB 1.1 Client -
Firmware update
only -
Firmware update
only
MMI (Main Machine Interface)
LCD 2.8 TFT (Resolution 240 x 320 x 65535 colors), defective pixels <= 3 for “H” versions
2.8 TFT (Resolution 240 x 320 x 16), defective pixels <= 3 for “Mx” versions
Backlight Life 20,000 hours
Brightness 160 cd/m2
Touch Panel Resistive Touch
Reset Button Yes
Electrical
Powered from Terminal Block +12 ~ +48 VDC - +12 ~ +48 VDC
Powered from PoE - IEEE 802.3af, Class1 (48 V)
Power Consumption 1.5 W
Mechanical
Dimensions
(W x L x H)
(Unit: mm)
“H” Version 119 x 76 x 33 119 x 76 x 32 119 x 76 x 33
“Mx” Version 127 x 92 x 31 127 x 92 x 30 127 x 92 x 31
Installation Wall Mounting
Ingress Protection Front Panel: IP40
Environmental
Operating Temperature -20 ~ +70°C
Storage Temperature -30 ~ +80°C
Ambient Relative Humidity 10 ~ 90% RH, non-condensing

TPD/VPD Series HMI Device User Manual
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved.Page: 14
1.4.3 TPD-430/430-EU/433/433-EU
Models TPD-430 TPD-430-EU TPD-433 TPD-433-EU
CPU Module
CPU 32-bit RISC CPU
Memory Expansion 16 MB SDRAM /8 MB Flash
Real Time Clock (RTC) Yes
Buzzer Yes
Rotary Switch (0 ~ 9) Yes
Communication Interface
Ethernet - RJ-45 x 1, 10/100 Base-TX
Serial Port RS-485 (including Self-Tuner)
USB 1.1 Client Firmware update only
MMI (Main Machine Interface)
LCD 4.3” TFT(Resolution 480 X 272 X 16), defective pixels <= 3
Backlight Life 20,000 hours
Brightness 400 cd/m2
Touch Panel Yes
LED Indicator Yes
Reset Button Yes
Electrical
Powered from Terminal Block +10 ~ +30 VDC
Powered from PoE - IEEE 802.3af, Class1 (48 V)
Power Consumption 2.5 W
Mechanical
Dimensions (W x L x H) 126 mm x 82
mm x 24 mm
126 mm x 92 mm x
29 mm
126 mm x 82 mm x
24 mm
126 mm x 92 mm x
29 mm
Installation
Wall Mount
(Suitable for the
outlet box in
United States)
Wall Mount
(Suitable for the
European 86mm x
86mm outlet box)
Wall Mount
(Suitable for the
outlet box in United
States)
Wall Mount
(Suitable for the
European 86mm x
86mm outlet box)
Environmental
Operating Temperature -20 ~ +50°C
Storage Temperature -30 ~ +80°C
Ambient Relative Humidity 10 ~ 90% RH, non-condensing

TPD/VPD Series HMI Device User Manual
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved.Page: 15
1.4.4 TPD-430-H/430-H-EU/433-H/433-H-EU
Models TPD-430 TPD-430-EU TPD-433 TPD-433-EU
CPU Module
CPU 32-bit RISC CPU
Memory Expansion 16 MB SDRAM /8 MB Flash
Real Time Clock (RTC) Yes
Buzzer Yes
Rotary Switch (0 ~ 9) Yes
Communication Interface
Ethernet - RJ-45 x 1, 10/100 Base-TX
Serial Port RS-485 (including Self-Tuner)
USB 1.1 Client Firmware update only
MMI (Main Machine Interface)
LCD 4.3” TFT(Resolution 480 X 272 X 16), defective pixels <= 3
Backlight Life 20,000 hours
Brightness 400 cd/m2
Touch Panel Yes
LED Indicator Yes
Reset Button Yes
Electrical
Powered from Terminal Block +12 ~ +48 VDC
Powered from PoE - IEEE 802.3af, Class1 (48 V)
Power Consumption 2.5 W
Mechanical
Dimensions (W x L x H) 126 mm x 82
mm x 24 mm
126 mm x 92 mm x
29 mm
126 mm x 82 mm x
24 mm
126 mm x 92 mm x
29 mm
Installation
Wall Mount
(Suitable for the
outlet box in
United States)
Wall Mount
(Suitable for the
European 86mm x
86mm outlet box)
Wall Mount
(Suitable for the
outlet box in United
States)
Wall Mount
(Suitable for the
European 86mm x
86mm outlet box)
Environmental
Operating Temperature -20 ~ +50°C
Storage Temperature -30 ~ +80°C
Ambient Relative Humidity 10 ~ 90% RH, non-condensing

TPD/VPD Series HMI Device User Manual
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved.Page: 16
1.4.5 TPD-432F/433F/433F-H/433-M2
Models TPD-432F TPD-433F TPD-433F-H TPD-433-M2
CPU Module
CPU 32-bit RISC CPU
Memory Expansion 16 MB SDRAM /8 MB Flash 16 MB SDRAM /16 MB Flash
Real Time Clock (RTC) Yes
Buzzer Yes
Rotary Switch (0 ~ 9) Yes
Communication Interface
Ethernet - RJ-45 x 1, 10/100 Base-TX
COM 1 RS-485 (including Self-Tuner) RS-485 (including Self-Tuner)
COM 2 RS-485 (including Self-Tuner) RS-232 (3-pin)
USB 1.1 Client Firmware update only
MMI (Main Machine Interface)
LCD 4.3” TFT(Resolution 480 X 272 X 16), defective pixels <= 3
Backlight Life 20,000 hours
Brightness 400 cd/m2
Touch Panel Yes
LED Indicator Yes
Reset Button Yes
Electrical
Powered from Terminal Block +10 ~ +30 VDC +10 ~ +30 VDC +12 ~ +48 VDC
Powered from PoE - IEEE 802.3af, Class1 (48 V)
Power Consumption 2.5 W
Mechanical
Dimensions (W x L x H) 140 mm x 87 mm x 42 mm
Installation Wall Mounting
Ingress Protection Front Panel: IP40
Environmental
Operating Temperature -20 ~ +50°C
Storage Temperature -30 ~ +80°C
Ambient Relative Humidity 10 ~ 90% RH, non-condensing

TPD/VPD Series HMI Device User Manual
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved.Page: 17
1.4.6 TPD-703/703-64
Models TPD-703 TPD-703-64
CPU Module
CPU 32-bit RISC CPU
Memory Expansion 16 MB SDRAM /16 MB Flash 64 MB SDRAM /64 MB Flash
Real Time Clock (RTC) Yes
Buzzer Yes
Rotary Switch (0 ~ 9) Yes
Communication Interface
Ethernet RJ-45 x 1, 10/100 Base-TX
COM 1 RS-485 (including Self-Tuner); non-isolation
COM 2 RS-232 (3-pin); non-isolation
MMI (Main Machine Interface)
LCD 7” TFT (Resolution 800 x 480 , 65535 colors), defective pixels <= 3
Backlight Life 20,000 hours
Brightness 250 cd/m2 400 cd/m2
Touch Panel 4-wire, analog resistive; Light Transmission: 80%
Reset Button Yes
Electrical
Powered from Terminal Block +12 ~ +48 VDC
Powered from PoE IEEE 802.3af, Class1 (48 V)
Power Consumption 3.6 W
Mechanical
Dimensions (W x L x H) 217 mm x 153 mm x 33 mm
Installation Wall Mounting
Ingress Protection Front Panel: IP40
Environmental
Operating Temperature -20 ~ +60°C
Storage Temperature -30 ~ +70°C
Ambient Relative Humidity 10 ~ 90% RH, non-condensing

TPD/VPD Series HMI Device User Manual
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved.Page: 18
1.4.7 VPD-130/130N/132/132N/133/133N
Models VPD-130 VPD-130N VPD-132 VPD-132N VPD-133 VPD-133N
CPU Module
CPU 32-bit RISC CPU
Memory Expansion 16 MB SDRAM /8 MB Flash
Real Time Clock (RTC) Yes
Buzzer Yes
Rotary Switch (0 ~ 9) Yes
Communication Interface
Ethernet - RJ-45 x 1, 10/100 Base-TX
COM1 RS-232/RS-485 (including
Self-Tuner) RS-485 (including Self-Tuner) and RS-232 (3-pin)
COM2 - RS-485 (including Self-Tuner)
USB 1.1 Client Firmware update only
I/O Expansion
I/O Expansion Bus - Yes, One of XV-boards
MMI (Main Machine Interface)
LCD 3.5” TFT (Resolution 240 x 320 x 16), defective pixels <= 3
Backlight Life 20,000 hours
Brightness 270 cd/m2
LED Indicator Yes - Yes - Yes -
Touch Panel Yes
Reset Button Yes
Rubber Keypad 5 keys
(Programmable)
- 5 keys
(Programmable)
- 5 keys
(Programmable)
-
Electrical
Powered from Terminal Block +12 ~ +48 VDC
Powered from PoE - IEEE 802.3af, Class1 (48 V)
Power Consumption 2W
Mechanical
Dimensions (W x L x H) 103 mm x 103 mm x 53 mm
Installation DIN-Rail Mounting and Panel Mounting
Ingress Protection Front Panel: IP65
Environmental
Operating Temperature -20 ~ +50°C
Storage Temperature -30 ~ +80°C
Ambient Relative Humidity 10 ~ 90% RH, non-condensing

TPD/VPD Series HMI Device User Manual
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved.Page: 19
1.4.8 VPD-130-H/130N-H/132-H/132N-H/133-H/1
33N-H
Models VPD-130-H VPD-130N-H VPD-132-H VPD-132N-H VPD-133-H VPD-133N-H
CPU Module
CPU 32-bit RISC CPU
Memory Expansion 16 MB SDRAM /16 MB Flash
Real Time Clock (RTC) Yes
Buzzer Yes
Rotary Switch (0 ~ 9) Yes
Communication Interface
Ethernet - RJ-45 x 1, 10/100 Base-TX
COM1 RS-232/RS-485 (including
Self-Tuner) RS-485 (including Self-Tuner) and RS-232 (3-pin)
COM2 - RS-485 (including Self-Tuner)
USB 1.1 Client Firmware update only
I/O Expansion
I/O Expansion Bus Yes, One of XV-boards
MMI (Main Machine Interface)
LCD 3.5” TFT (Resolution 240 x 320 x 16), defective pixels <= 3
Backlight Life 20,000 hours
Brightness 270 cd/m2
LED Indicator Yes - Yes - Yes -
Touch Panel Yes
Reset Button Yes
Rubber Keypad 5 keys
(Programmable)
- 5 keys
(Programmable)
- 5 keys
(Programmable)
-
Electrical
Powered from Terminal Block +12 ~ +48 VDC
Powered from PoE - IEEE 802.3af, Class1 (48 V)
Power Consumption 2W
Mechanical
Dimensions (W x L x H) 103 mm x 103 mm x 53 mm
Installation DIN-Rail Mounting and Panel Mounting
Ingress Protection Front Panel: IP65
Environmental
Operating Temperature -20 ~ +50°C
Storage Temperature -30 ~ +80°C
Ambient Relative Humidity 10 ~ 90% RH, non-condensing

TPD/VPD Series HMI Device User Manual
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved.Page: 20
1.4.9 VPD-142/142N/143/143N
Models VPD-142 VPD-142N VPD-143 VPD-413N
CPU Module
CPU 32-bit RISC CPU
Memory Expansion 16 MB SDRAM /8 MB Flash
Real Time Clock (RTC) Yes
Buzzer Yes
Rotary Switch (0 ~ 9) Yes
Communication Interface
Ethernet - RJ-45 x 1, 10/100 Base-TX
COM1 One set of RS-232 (3-pin) / RS-485 (including Self-Tuner)
COM2 One set of RS-232 (3-pin) / RS-485 (including Self-Tuner)
USB 1.1 Client Firmware update only
I/O Expansion
I/O Expansion Bus Yes, One of XV-boards
MMI (Main Machine Interface)
LCD 4.3” TFT (Resolution 480 x 272 x 16), defective pixels <= 3
Backlight Life 20,000 hours
Brightness 400 cd/m2
LED Indicator Yes - Yes -
Touch Panel Yes
Reset Button Yes
Rubber Keypad 5 keys
(Programmable)
- 5 keys
(Programmable)
-
Electrical
Powered from Terminal Block +12 ~ +48 VDC
Powered from PoE - IEEE 802.3af, Class1 (48 V)
Power Consumption 2.5 W
Mechanical
Dimensions (W x L x H) 131 mm x 105 mm x 54 mm
Installation DIN-Rail Mounting and Panel Mounting
Ingress Protection Front Panel: IP65
Environmental
Operating Temperature -20 ~ +50°C
Storage Temperature -30 ~ +80°C
Ambient Relative Humidity 10 ~ 90% RH, non-condensing