ICP DAS USA WP-5231PM-3GWA-CE7 User manual

WP-5231PM-3GWA-CE7 Quick Start, E-mail: [e-mail]
1
Version 1.0, October 2016
What’s in the Box?
In addition to this guide, the package includes the following items:
Technical Support
WP-5000-CE7 User Manual
CD:\WinPAC_AM335x\Wp-5231\Document\
http://ftp.icpdas.com/pub/cd/winpac_am335x/wp-5231/document/
1
Configuring the Boot Mode
Before starting any installation, be sure
that the switch is placed in the “0” position.
WP-5231PM-3GWA-CE7 Quick Start
WP-5231PM-3GWA-CE7
GSM/GPRS External
Antenna (ANT-421-04)
GPS Active External
Antenna (ANT-115-03)
A microSD card
and a micro SD/SD
adapter
44 mm
DIN-Rail Clip
Software
Utility CD
Screw Driver
2.4 mm
M3x6L
Screw * 4

WP-5231PM-3GWA-CE7 Quick Start, E-mail: [e-mail]
2
2
Installing the SIM card and antenna
Step 1: Push the ejection button to pull out the tray
Step 2: Put the SIM card in the tray, and then push the tray back
into the socket
Step 3: Screw the GSM/GPRS and
GPS antenna tightly into the
antenna connectors
3
Connecting to PC, Monitor and Power Supply
i. Connect the mouse or keyboard to the USB port.
ii. Connect PC to the Ethernet port through an Ethernet switch.
iii. Connect the power supply (+12 to +48 VDC) to PWR and GND
terminals.
iv. Connect the monitor to the VGA port.
v. Turn on the WinPAC
Ejection button

WP-5231PM-3GWA-CE7 Quick Start, E-mail: [e-mail]
3
4
Using PAC Utility to Manage the WinPAC
Step 1: Double-click the PAC Utility shortcut on the desktop
Step 2: Configure IP address (DHCP), FTP Server, Auto Execution
files…, etc
Step 3: Reboot the WinPAC for changes to take effect

WP-5231PM-3GWA-CE7 Quick Start, E-mail: [e-mail]
4
5
Changing the User Interface Language
Step 1: Click Start menu, point to Settings, click Control Panel, and
then click Regional Settings
Step 2: Click User Interface Language tab, choose to your local
language, and then click OK
Step 3: Run the PAC Utility, and then reboot the WinPAC for
changes to take effect