ICP DAS USA PCI-1202 Series User manual

- 1 -
Language
English
Version V1.0
Update Oct.2008
………………………………………………
What’s on your package?
 One PCI-1202/1602/180x series card
 One companion PCI C (V3.6 or later)
 One Quick Start Guide(This document)
………………………………………………
Installing Windows Driver
Follow those steps:
1. Setup the Windows driver.
You can get the driver from:
PCI-1202 :
C :\NAP OS\PCI\PCI-1202\ LL_OCX\
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/pci-1202/dll_ocx/
1
2
PCI-1202 1602 180x

- 2 -
PCI-1602:
C :\NAP OS\PCI\PCI-1602\ LL_OCX\
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/pci-1602/dll_ocx/
PCI-180x:
C :\NAP OS\PCI\PCI-180x\ LL_OCX\
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/pci-180x/dll_ocx/
2. Click button to start installation.
3. Click button to install driver into the
default folder.
4. Click button to continue installation.
5. Select “NO, I will restart my computer later” and
then click button.
………………………………………………
Installing Hardware on PC
Follow those steps:
1. Shut down and power off your computer
2. Remove all covers from the computer
3. Select an empty PCI slot
4. Carefully insert your I/O card into the PCI slot
5. Replace the PC covers
6. Power on the computer
After powering-on the computer, the Plug&Play card
could work immediately.
3
Windows driver only support windows 98/NT/2000 and
XP/2003
/vista 32
-
bit versions.

- 3 -
………………………………………………
Jumper Setting
 JP1 : A/ Input Type Selection
 J1 : /A Reference Voltage Selection
 /I Port Setting (PCI-1202HU LU only)
4
JP1
Differential
Inputs
6
2
1
5
JP1
Single-Ended
Inputs (default)
1
5
2
6
J1
1
± 10 Voltage
output (default)
J1
1
± 5 Voltage
output
JP2
3
2
1
Pull Hig
JP2
3
2
1
Pull Low

- 4 -
………………………………………………
Pin Assignments
 CON1: igital Output connector.
 CON2: igital Input connector.
5
Pin Name Pin Name
1 igital output 0
2 igital output 1
3 igital output 2
4 igital output 3
5 igital output 4
6 igital output 5
17 igital output 6
8 igital output 7
9 igital output 8
10 igital output 9
11 igital output 10
12 igital output 11
13 igital output 12
14 igital output 13
15 igital output 14
16 igital output 15
17 PCB ground 18 PCB ground
19 PCB +5V 20 PCB +12V
Pin Name Pin Name
1 igital input 0 2 igital input 1
3 igital input 2 4 igital input 3
5 igital input 4 6 igital input 5
7 igital input 6 8 igital input 7
9 igital input 8 10 igital input 9
11 igital input 10
12 igital input 11
13 igital input 12
14 igital input 13
15 igital input 14
16 igital input 15
17 PCB ground 18 PCB ground
19 PCB +5V 20 PCB +12V

- 5 -
 CN3: Single-Ended/ ifferential Input.
(For PCI-1202 1602 1802H L HU LU) (For PCI-1800H L)
The detail pin assignments information. Please refer to :
CD:\NAPDOS\PCI\PCI-1202 Manual PCI-1202_1602_180x_hardware_manual.pdf
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/pci-1202/manual/pci-1202_1602_180x_ha
rdware_manual.pdf
Pin
Name Pin
Name
1 Analog input 0/0+ 20 Analog input 16/0-
2 Analog input 1/1+ 21 Analog input 17/1-
3 Analog input 2/2+ 22 Analog input 18/2-
4 Analog input 3/3+ 23 Analog input 19/3-
5 Analog input 4/4+ 24 Analog input 20/4-
6 Analog input 5/5+ 25 Analog input 21/5-
7 Analog input 6/6+ 26 Analog input 22/6-
8 Analog input 7/7+ 27 Analog input 23/7-
9 Analog input 8/8+ 28 Analog input 24/8-
10 Analog input 9/9+ 29 Analog input 25/9-
11 Analog input 10/10+ 30 Analog input 26/10-
12 Analog input 11/11+ 31 Analog input 27/11-
13 Analog input 12/12+ 32 Analog input 28/12-
14 Analog input 13/13+ 33 Analog input 29/13-
15 Analog input 14/14+ 34 Analog input 30/14-
16 Analog input 15/15+ 35 Analog input 31/15-
17 Analog ground 36 Analog output 1
18 Analog output 0 37 igital ground
19 External trigger
Pin
Name Pin
Name
1 Analog input 0/0+
20 Analog input 8/0-
2 Analog input 1/1+
21 Analog input 9/1-
3 Analog input 2/2+
22 Analog input 10/2-
4 Analog input 3/3+
23 Analog input 11/3-
5 Analog input 4/4+
24 Analog input 12/4-
6 Analog input 5/5+
25 Analog input 13/5-
7 Analog input 6/6+
26 Analog input 14/6-
8 Analog input 7/7+
27 Analog input 15/7-
9 Analog Ground 28 Analog Ground
10 Analog Ground 29 Analog Ground
11 N.C. 30 Analog output 0
12 N.C. 31 N.C.
13 PCB +12V 32 Analog output 1
14 Analog Ground 33 N.C.
15 igital Ground 34 N.C.
16 N.C. 35 N.C.
17 External Trigger 36 N.C.
18 N.C. 37 N.C.
19 PCB +5V

- 6 -
………………………………………………
Self-Test
1. Use CA-2002(Optional) to connect the CN1 with
CN2.
2. Run the PCI-1202/1602/180x sample program.
Get the file from:
PCI-1202:
C :\NAP OS\PCI\PCI-1202/ LL_OCX/ emo\
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/pci-1202/dll_ocx/demo/
PCI-1602:
C :\NAP OS\PCI\PCI-1602/ LL_OCX/ emo\
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/pci-1602/dll_ocx/demo/
PCI-180x:
C :\NAP OS\PCI\PCI-180x/ LL_OCX/ emo\
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/pci-180x/dll_ocx/demo/
6
CN1
CN2
CN3

- 7 -
3. Check number of the PCI-1202/1602/180x and test
IO function.
4. Get IO function test result.
1
.
The o
ne
PCI-1202/1602/
180x had
successfully
installed to PC.
3
.
Click this
button to do
IO test.
2.
Select the board
number for the
PCI-1202/1602/180x.
It starts from 0.
4. Click the
channel 0 、2、
4、6 in the O.
5
.
I show to
channel 0、2、
4、6 for high
state. (Red light)
Complete

- 8 -
………………………………………………
Additional Information
 PCI-1202 1602 180x Series Card Product page:
http://www.icpdas.com/products/ AQ/pc_based/pci_1202.htm
http://www.icpdas.com/products/ AQ/pc_based/pci_1602.htm
http://www.icpdas.com/products/ AQ/pc_based/pci_1800.htm
 CA-2002(Optional) page:
http://www.icpdas.com/products/Accessories/cable/cable_selection.htm
 Documents:
C :\NAP OS\PCI\PCI-1202\Manual (PCI-1602, PCI-180x)
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/pci-1202/manual/
(PCI-1602, PCI-180x)
 Software:
C :\NAP OS\PCI\PCI-1202 (PCI-1602, PCI-180x)
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/pci-1202/
(PCI-1602, PCI-180x)
The ICP DAS Web Site
http://www.icpdas.com
Contact Us
[email protected]
Copyright ©2008 by ICP AS Co., Ltd. All right are reserved
7
 Technical support
 Supplies and ordering information
 Ways to enhance your device
 FAQ
 Application story