ICP DAS USA PCI-M512 User manual

PCI-M512/M512U Quick Start Guide ICP DAS CO., LTD.
1
WebSite: http:// www.icpdas.com.tw E-Mail: [e-mail] , [email protected]
The package includes the following items:
Step 1: Setup the Windows driver. The driver is located at:
The UniDAQ driver supports 32-/64-bit Windows 2K/XP/2003/Vista/7/8; it
is recommended to install this driver for new user:
CD: \NAPDOS\PCI\UniDAQ\DLL\Driver
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/unidaq/dll/driver/
The PCI-M512 Series classic driver supports Windows 98/NT/2K and 32-bit
XP/ 2003/ Vista/7/8. Recommended to install this driver for have been
used PCI-M512 series boards of regular user, please refer to :
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/pci-m512/manual/quicksta
rt/classic/
For PCI-M512/M512U
What’s in the shipping package?
English/ Jun. 2013/ Version 1.2
Installing Windows Driver
Software Utility CD
(V5.2 or later)
Quick Start Guide
(This Document)
PCI-M512/M512U

PCI-M512/M512U Quick Start Guide ICP DAS CO., LTD.
2
WebSite: http:// www.icpdas.com.tw E-Mail: [e-mail] , [email protected]
Step 2: Click the “Next>”button to start the installation.
Step 3: Check your DAQ Card is or not on supported list, then click the
“Next>”button.
Step 4: Select the installed folder, the default path is C:\ICPDAS\UniDAQ ,
confirm and click the “Next>”button.
Step 5: Check your DAQ Card on list, then click the “Next>”button.
Step 6: Click the “Next>”button on the Select Additional Tasks window.
Step 7: Click the “Next>”button on the Download Information window.
Step 8: Select “No, I will restart my computer later”and then click the
“Finish”button.
For detailed information about the driver installation, please refer to Chapter
2.1 “Getting the UniDAQ Driver DLL Installer package”of the UniDAQ SDK
user manual.
Step 1: Shut down and power off your computer.
Step 2: Remove the cover from the computer.
Step 3: Select an unused PCI slot.
Step 4: Carefully insert your I/O card into the PCI slot.
Step 5: Replace the PC cover.
Step 6: Power on the computer.
After powering-on the computer, please finish the Plug&Play steps according
to the prompted messages.
Installing Hardware on PC

PCI-M512/M512U Quick Start Guide ICP DAS CO., LTD.
3
WebSite: http:// www.icpdas.com.tw E-Mail: [e-mail] , [email protected]
CN1 Digital Output connector (20-pin box header)
CN2 Digital Input connector (20-pin box header)
Pin Assignments
CN2: D/I
CN1: D/O

PCI-M512/M512U Quick Start Guide ICP DAS CO., LTD.
4
WebSite: http:// www.icpdas.com.tw E-Mail: [e-mail] , [email protected]
1.Use CA-2002 (optional) to connect the CN1 with CN2.
2.The UniDAQ Utility.exe is located in:
This program (UniDAQ Utility) will be placed in the default path after completing
installation.
Default Path: C:\ICPDAS\UniDAQ\Driver\
Double click the “UniDAQUtility.exe”
Double-Click
1
Self-Test
CN2
CN1
CA-2002

PCI-M512/M512U Quick Start Guide ICP DAS CO., LTD.
5
WebSite: http:// www.icpdas.com.tw E-Mail: [e-mail] , [email protected]
3. Execute the UniDAQ Utility Program.
4.Get DIO function test result.
Confirm the PCI-M512 series card had
successfully installed to PC. It starts
from 0.
2
Click this button
to start test.
3
Select the “Port 0”
Check channel 4, 6, 8,
10, 12, 14
6
5
Click “Digital Output” item.
4

PCI-M512/M512U Quick Start Guide ICP DAS CO., LTD.
6
WebSite: http:// www.icpdas.com.tw E-Mail: [e-mail] , [email protected]
PCI-M512 series card product page:
http://www.icpdas.com/root/product/solutions/pc_based_io_board/pci/pci-m512.html
CA-2002 page (optional):
http://www.icpdas.com/products/Accessories/cable/cable_selection.htm
Documentation and Software:
CD:\NAPDOS\PCI\UniDAQ\
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/unidaq/
Related Information
PASS
Select the “Port 0”
8
The corresponding D/I
becomes red for channel 4, 6,
8, 10, 12, 14 of D/O is ON.
Click “Digital Input”item.
7
9