IEI Technology PCIE-Q470 User manual

Full-size PICMG 1.3 CPU Card Supports 10th/11th Gen. LGA1200 Intel®
Core™ i9/i7/i5/i3, Pentium® and Celeron® Processors, Intel® Q470,
DDR4, HDMI, Dual Intel® 2.5GbE, USB 3.2, SATA 6Gb/s, M.2,
iAudio and RoHS
PCIE-Q470
Quick Installation Guide
Version 1.0
March 1, 2022
Package List
PCIE-Q470 package includes the following items:
1 x PCIE-Q470 single board computer
1 x SATA cable
1 x Mini jumper pack
1 x QIG
© 2022 Copyright by IEI Integration Corp.
All rights reserved.

2
Specifications
CPU:
10th/11th Generation LGA1200 Intel® Core™ i9/i7/i5/i3, Pentium®
and Celeron® processors
Chipset:
Intel® Q470
Memory:
Four 288-pin 2933 MHz dual-channel DDR4 DIMM slots
supporting up to 128 GB memory
BIOS:
AMI UEFI BIOS
Graphics Engine:
10th Generation CML-S: up to Intel® UHD Graphics 630, Intel®
HD 9th Generation Display Engine based on 16 low power
execution units supporting DX2015, OpenGL 5.X and OpenCL2.x,
ES 2.0
11th Generation RKL-SXe: 12th Generation Graphics Architecture,
Intel® UHD Graphics 750, supporting 12-bit end-to-end, AV1, VP9,
HEVC 12b, HDR10, FP16
Display Output:
1 x HDMI 1.4 (up to 4096 x 2160 @ 30 Hz)
Ethernet:
LAN1: Intel® I225V 2.5GbE controller (colay with I225-LM)
LAN2: Intel® I225V 2.5GbE controller (colay with I225-LM)
External I/O Interface:
2 x USB 3.2 Gen 1 (5Gb/s) (Type-A)
1 x USB 3.2 Gen 2 (10Gb/s) (Type-C)
Internal I/O Interface:
4 x SATA 6Gb/s (RAID 0/1/5/10 supported)
6 x USB 2.0 (2x4 pin, p=2.54)
2 x USB 3.2 Gen 1 (5Gb/s) (2x10 pin, p=2.0)
1 x USB 3.2 Gen 1 (Type-A, 180°)
2 x RS-232 (2x5 pin, p=2.0)

3
2 x RS-422/485 (1x4 pin, p=2.0)
Audio:
1 x IAUDIO connector supporting IEI AC-KIT-888S audio module
(2x5 pin, p=2.0)
Front Panel:
1 x Front panel (2x7 pin, p=2.54; power LED, HDD LED, power
button, reset button, speaker)
LAN LED:
2 x LAN LED (1x2 pin, p=2.54)
Expansions:
1 x PCIe x16 signal via golden finger
(supporting x16, or x8 + x8, or x4 + x4 + x8)
4 x PCIe x1 signal from PCH via golden finger
(supporting one x4, or four x1)
4 x PCI signal via golden finger
1 x M.2 2230 A Key (PCIe x2 & USB 2.0)
1 x M.2 3042/3052 B Key w/ SIM holder (PCIe Gen3 x2)
1 x M.2 2280/2242 M Key on solder side (PCIe x4)
Digital I/O:
1 x 12-bit digital I/O (2x7 pin, p=2.0)
SMBus:
1 x SMBus (1x4 pin, p=1.25)
I2C:
1 x I2C (1x4 pin, p=1.25)
Fan Connector:
1 x CPU fan connector (1x4 pin)
1 x System fan connector (1x4 pin)
Chassis Intrusion:
1 x Chassis intrusion connector (1x2 pin, p=2.54)
TPM:
Intel® PTT (TPM 2.0)

4
Power Supply:
ATX/AT power supply
Support AT/ATX mode
ErP/EuP compliant
Power Consumption:
3.3V@1.04A, [email protected], [email protected]
(Intel® Core™ i9-11900K CPU with 4 GB 3200 MHz DDR4
memory)
Watchdog Timer:
Software programmable support 1–255 sec. system reset
Operation Temperature: 0°C –60°C
Storage Temperature: -30°C –70°C
Operation Humidity: 5% –95%, non-condensing
Dimensions: 338 mm x 126 mm
Weight: GW:1000 g / NW:500 g
Safety: CE/FCC compliant
All the drivers and utility for the PCIE-
Q470 are available on IEI Resource
Download Center. Type PCIE-Q470
and press Enter to find all the relevant
software, utilities, and documentation.
To install software from the
downloaded ISO file, mount the file as
a virtual drive to view its content.
IEI Resource Download Center
https://download.ieiworld.com

5
Ordering Information
PCIE-Q470-R10:
Full-size PICMG 1.3 CPU card supports 10th/11th Gen. LGA1200
Intel® Core™ i9/i7/i5/i3, Pentium® and Celeron® processors, Intel®
Q470, DDR4 DIMM, HDMI, dual Intel® 2.5GbE, USB 3.2 Gen 2,
SATA 6Gb/s, M.2, iAudio and RoHS
CB-USB02-RS:
Dual port USB cable with bracket, 300mm, p=2.54
32102-000100-200-RS:
SATA power cable, MOLEX 8981-4M to SATA15P, 150mm
32205-002700-200-RS:
RS-232/422/485 cable, 200mm, p=2.0
AC-KIT-888S-R10:
Realtek ALC888S 7.1 Channel HD Audio peripheral board, RoHS
CF-1150SA-R10
Special cooler kit for LGA1150, high-performance compatible, 95W
CF-1150SB-R11
Special cooler kit for LGA1150, high-performance compatible, 65W
CF-1150SC-R20
Special cooler kit for LGA1150, 1U chassis compatible, 65W
CF-1150SE-R11
Special cooler kit for LGA1150, high-performance compatible, 95W

6
Jumpers Setting and Connectors
LABEL
FUNCTION
J_ATX_AT1
AT/ATX power mode setting
SW_BIOS1_1
BIOS selection switch
J_CMOS1
Clear CMOS jumper
J_FLASH1
Flash descriptor security override jumper
CPU12V1
ATX CPU 12V power connector
J_AUDIO1
Audio connector
BAT1
RTC battery connector
CHASSIS1
Chassis intrusion connector
CHA_DIMM0, CHA_DIMM1
CHB_DIMM0, CHB_DIMM1
DDR4 DIMM slots
DIO1
Digital I/O connector
DBG_SPI1
EC debug connector
CPU_FAN1, SYS_FAN1
Fan connectors
JSPI1
Flash SPI ROM connector
JEC1
Flash EC ROM connector
F_PANEL1
Front panel connector
I2C1
I2C connector
LED_LAN1
LAN1 link LED connector
LED_LAN2
LAN2 link LED connector
M2_A1
M.2 A-key slot
M2_B1
M.2 B-key slot
M2_M1
M.2 M-key slot (on solder side)
PWR_SW1
On-board power switch
COM1, COM2
RS-232 serial port connectors
COM3, COM4
RS-422/485 serial port connectors
S_ATA3, S_ATA4,
S_ATA5, S_ATA6
SATA 6Gb/s connectors
SMB1
SMBus connector
SIM1
SIM card slot
JUSB3, JUSB4, JUSB5
Internal USB 2.0 connectors

7
USB1
Internal USB 3.2 Gen 1 connector (Type-A)
JUSB3-1
Internal USB 3.2 Gen 1 connector
LAN1, LAN2
External 2.5GbE RJ-45 connectors
HDMI1
External HDMI connector
CN1, CN2
External USB 3.2 Gen 1 connectors
CON1
External USB 3.2 Gen 2 connector
J_ATX_AT1: AT/ATX Power Mode Setting
PIN NO.
DESCRIPTION
Short 1 - 2
ATX Power Mode (default)
Short 2 - 3
AT Power Mode
SW_BIOS1_1: BIOS Selection Switch
PIN NO.
DESCRIPTION
Short A - B
BIOS1: four PCIe x1 slots (default)
Short B - C
BIOS2: one PCIe x4 slot
J_CMOS1: Clear CMOS Jumper
Status
DESCRIPTION
NC
Keep CMOS Setup
(Normal Operation)
Press
Clear CMOS Setup
J_FLASH1: Flash Descriptor Security Override Jumper
PIN NO.
DESCRIPTION
Short 1-2
Disabled (default)
Short 2-3
Enabled

8
USB Power SW: USB Power Setting
USB Power SW
DESCRIPTION
+5V DUAL
Power is provided in S3/S4 sleep
state (default)
+5V
Power is not provided in S3/S4
sleep state
Use the USB Power SW BIOS options to configure whether to provide power to
the corresponding USB connector(s) when the system is in S3/S4 sleep state.
This option is valid only when the above Power Saving Function (ERP) BIOS
option is disabled.
CPU12V1: ATX CPU 12V Power Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
GND
5
+12V
2
GND
6
+12V
3
GND
7
+12V
4
GND
8
+12V
J_AUDIO1 : Internal Audio Connector for IEI Audio Module
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
HDA_SYNC
2
HDA_BIT_CLK
3
HDA_SDOUT
4
HDA_SPKR
5
HDA_SDIN
6
HDA_RST#
7
HDA_VCC
8
HDA_GND
9
HDA_+12V
10
HDA_GND
BAT1: RTC Battery Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
VBATT
2
GND

9
CHASSIS1: Chassis Intrusion Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
+3.3VSB
2
CHASSIS_OPEN
DIO1 : Digital Input/Output Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
GND
2
VCC
3
Output 5
4
Output 4
5
Output 3
6
Output 2
7
Output 1
8
Output 0
9
Input 5
10
Input 4
11
Input 3
12
Input 2
13
Input 1
14
Input 0
DBG_SPI1: EC Debug Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
NC
4
EDICLK
2
EDICS
5
EDIDI
3
EDIDO
6
GND
CPU_FAN1, SYS_FAN: CPU/System Fan Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
GND
3
FANIO
2
+12V
4
PWM
JSPI1: Flash SPI ROM Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
+V3.3M_SPI_CON
4
SPI_CLK_SW
2
SPI_CS
5
SPI_SI_SW
3
SPI_SO_SW
6
GND

10
JEC1: Flash EC ROM Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
FSCE#
2
VCC
3
FMISO
4
NC
5
EC_DET_FLASH
6
FSCK
7
GND
8
FMOSI
F_PANEL1: Front Panel Connector
PIN
DESCRIPTION
PIN
DESCRIPTION
PWR
LED
1
PWR_LED+
2
BEEP_PWR
SPKR
3
NC
4
NC
5
PWR_LED-
6
NC
PWR
BTN
7
PWR_BTN+
8
PC_BEEP
9
PWR_BTN-
10
NC
HDD
LED
11
HDD_LED+
12
Reset+
RESET
13
HDD_LED-
14
Reset-
I2C1: I2C Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
GND
3
I2C_CLK
2
I2C_DATA
4
+5V
LED_LAN1: LAN1 Link LED Connector
PIN
DESCRIPTION
PIN
DESCRIPTION
1
+3.3V
2
LAN1_LED_LNK#_ACT
LED_LAN2: LAN2 Link LED Connector
PIN
DESCRIPTION
PIN
DESCRIPTION
1
+3.3V
2
LAN2_LED_LNK#_ACT