IEI Technology HTB-210-Q470 User manual

HTB-210-Q470 Embedded System
Page i
User Manual
HTB-210-Q470 Box PC
MODEL:MODEL:
HTB-210-Q470
Embedded System Supports Intel®Core™ i5-10500TE CPU,
DDR4, RS-232/422/485, 2.5GbE LAN, USB 3.2 Gen 1,
PCIe x16/x4, M.2, SATA 6Gb/s, HDMI, DP and RoHS
Rev. 1.00 –October 29, 2021

HTB-210-Q470 Embedded System
Page ii
Revision
Date
Version
Changes
October 29, 2021
1.00
Initial release

HTB-210-Q470 Embedded System
Page iii
Copyright
COPYRIGHT NOTICE
The information in this document is subject to change without prior notice in order to
improve reliability, design and function and does not represent a commitment on the part
of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special, incidental, or
consequential damages arising out of the use or inability to use the product or
documentation, even if advised of the possibility of such damages.
This document contains proprietary information protected by copyright. All rights are
reserved. No part of this manual may be reproduced by any mechanical, electronic, or
other means in any form without prior written permission of the manufacturer.
TRADEMARKS
All registered trademarks and product names mentioned herein are used for identification
purposes only and may be trademarks and/or registered trademarks of their respective
owners.
CONTACT INFORMATION
IEI Integration Corp.
Address:
No. 29, Zongxing Rd., Xizhi Dist.,
New Taipei City 221, Taiwan
Phone:
[phone]
Fax:
[phone]
Web Site:
www.ieiworld.com
Sales Email:
[email protected].tw

HTB-210-Q470 Embedded System
Page iv
Manual Conventions
WARNING
Warnings appear where overlooked details may cause damage to the
equipment or result in personal injury. Warnings should be taken seriously.
CAUTION
Cautionary messages should be heeded to help reduce the chance of
losing data or damaging the product.
NOTE
These messages inform the reader of essential but non-critical information.
These messages should be read carefully as any directions or instructions
contained therein can help avoid making mistakes.

HTB-210-Q470 Embedded System
Page v
Table of Contents
1 INTRODUCTION.......................................................................................................... 1
1.1 OVERVIEW.................................................................................................................. 2
1.2 FEATURES................................................................................................................... 2
1.3 FRONT PANEL............................................................................................................. 3
1.4 REAR PANEL .............................................................................................................. 3
1.5 BOTTOM PANEL ......................................................................................................... 4
1.6 TECHNICAL SPECIFICATIONS ...................................................................................... 4
1.7 DIMENSIONS............................................................................................................... 6
2 UNPACKING ................................................................................................................. 7
2.1 UNPACKING ................................................................................................................ 8
2.2 PACKING LIST ............................................................................................................ 8
2.3 OPTIONAL ITEMS ........................................................................................................ 9
3 INSTALLATION ......................................................................................................... 10
3.1 ANTI-STATIC PRECAUTIONS.......................................................................................11
3.2 INSTALLATION PRECAUTIONS ................................................................................... 12
3.3 OPENING TOP COVER ............................................................................................... 13
3.4 HDD INSTALLATION................................................................................................. 14
3.5 M.2 MODULE INSTALLATION.................................................................................... 16
3.6 EXPANSION CARD INSTALLATION ............................................................................. 18
3.7 CLEAR CMOS.......................................................................................................... 19
3.8 RS-232/422/485 SERIAL DEVICE CONNECTION ....................................................... 20
3.9 POWER-ON PROCEDURE........................................................................................... 21
3.9.1 Installation Checklist ....................................................................................... 21
3.9.2 Power-on Procedure ........................................................................................ 21
3.10 AVAILABLE DRIVERS.............................................................................................. 23
3.10.1 Driver Download ........................................................................................... 23
4 BIOS .............................................................................................................................. 25
4.1 INTRODUCTION......................................................................................................... 26

HTB-210-Q470 Embedded System
Page vi
4.1.1 Starting Setup................................................................................................... 26
4.1.2 Using Setup ...................................................................................................... 26
4.1.3 Getting Help..................................................................................................... 27
4.1.4 Unable to Reboot after Configuration Changes .............................................. 27
4.1.5 BIOS Menu Bar................................................................................................ 27
4.2 MAIN........................................................................................................................ 27
4.3 ADVANCED............................................................................................................... 29
4.3.1 CPU Configuration .......................................................................................... 29
4.3.2 PCH-FW Configuration................................................................................... 32
4.3.2.1 PTT Configuration .................................................................................... 33
4.3.3 Trusted Computing........................................................................................... 34
4.3.4 ACPI Settings ................................................................................................... 35
4.3.5 F81804 Super IO Configuration ...................................................................... 36
4.3.5.1 Serial Port 1 Configuration ....................................................................... 37
4.3.6 iWDD H/W Monitor......................................................................................... 38
4.3.6.1 Smart Fan Mode Configuration ................................................................ 39
4.3.7 RTC Wake Settings........................................................................................... 42
4.3.8 Serial Port Console Redirection ...................................................................... 43
4.3.9 USB Configuration........................................................................................... 45
4.3.10 Network Stack Configuration......................................................................... 46
4.3.11 NVMe Configuration...................................................................................... 47
4.4 CHIPSET ................................................................................................................... 48
4.4.1 System Agent (SA) Configuration .................................................................... 49
4.4.1.1 Memory Configuration ............................................................................. 50
4.4.1.2 Graphics Configuration............................................................................. 50
4.4.1.3 PEG Port Configuration............................................................................ 52
4.4.2 PCH-IO Configuration .................................................................................... 53
4.4.2.1 PCI Express Configuration ....................................................................... 55
4.4.2.2 SATA and RST Configuration................................................................... 57
4.4.2.3 HD Audio Configuration........................................................................... 58
4.5 SECURITY ................................................................................................................. 59
4.6 BOOT........................................................................................................................ 60
4.7 SAVE & EXIT ............................................................................................................ 62
5 TROUBLESHOOTING AND MAINTENANCE ..................................................... 63

HTB-210-Q470 Embedded System
Page vii
5.1 SYSTEM MAINTENANCE OVERVIEW ......................................................................... 64
5.2 SYSTEM TROUBLESHOOTING.................................................................................... 64
5.2.1 The System Doesn’t Turn On ........................................................................... 64
5.2.2 The System Doesn’t Boot Up ........................................................................... 65
5.2.3 More Troubleshooting...................................................................................... 65
5.3 COMPONENT REPLACEMENT PROCEDURE ................................................................ 66
5.3.1 SO-DIMM Replacement................................................................................... 66
6 INTERFACE CONNECTORS ................................................................................... 68
6.1 PERIPHERAL INTERFACE CONNECTORS..................................................................... 69
6.2 INTERNAL PERIPHERAL CONNECTORS ...................................................................... 70
6.2.1 +12V ATX Power Connector (CPU12V1) ....................................................... 71
6.2.2 Audio Kit Connector (J_AUDIO1) .................................................................. 71
6.2.3 Battery Connector (BAT1) ............................................................................... 71
6.2.4 Buzzer Connector (SPK1)................................................................................ 71
6.2.5 Chassis Intrusion Connector (CHASSIS1)....................................................... 72
6.2.6 Debug Port Connector (DBG_PORT1)........................................................... 72
6.2.7 Digital I/O Connector (DIO1) ......................................................................... 72
6.2.8 Fan Connectors (CPU_FAN1)......................................................................... 72
6.2.9 Front Panel Connector (F_PANEL1)............................................................... 73
6.2.10 I2C Connector (I2C1)..................................................................................... 73
6.2.11 RS-232/422/485 Connector (COM1) ............................................................. 73
6.2.12 SATA Connectors (S_ATA1, S_ATA2)............................................................. 74
6.2.13 SMBus Connector (SMB1)............................................................................. 74
6.2.14 USB 2.0 Connector (USB2) ........................................................................... 74
6.2.15 TPM Connector (TPM1)................................................................................ 75
6.3 EXTERNAL INTERFACE PANEL CONNECTORS............................................................ 75
6.3.1 Ethernet Connectors (LAN1) ........................................................................... 76
6.3.2 HDMI Connector (HDMI1) ............................................................................. 76
6.3.3 USB/DP Connector (USB_C1) ........................................................................ 77
6.3.4 USB 3.2 Gen 1 Connectors (CN1, CN2).......................................................... 77
6.4 JUMPERS................................................................................................................... 78
6.4.1 AT/ATX Power Select Switch (J_ATX_AT1) .................................................... 78
6.4.2 BIOS Select Switch (SW_BIOS1_1)................................................................. 78
6.4.3 Flash Descriptor Security Override Jumper.................................................... 79

HTB-210-Q470 Embedded System
Page viii
A REGULATORY COMPLIANCE .............................................................................. 80
B SAFETY PRECAUTIONS ......................................................................................... 85
B.1 SAFETY PRECAUTIONS............................................................................................. 86
B.1.1 General Safety Precautions ............................................................................. 86
B.1.2 Anti-static Precautions .................................................................................... 87
B.1.3 Product Disposal ............................................................................................. 88
B.1.4 Classification................................................................................................... 89
B.2 MAINTENANCE AND CLEANING PRECAUTIONS ........................................................ 89
B.2.1 Maintenance and Cleaning.............................................................................. 89
B.2.2 Cleaning Tools................................................................................................. 90
C BIOS MENU OPTIONS............................................................................................. 91
C.1 BIOS CONFIGURATION OPTIONS ............................................................................. 92
D WATCHDOG TIMER ................................................................................................ 94
E ERROR BEEP CODE................................................................................................. 97
E.1 PEI BEEP CODES...................................................................................................... 98
E.2 DXE BEEP CODES ................................................................................................... 98
F HAZARDOUS MATERIALS DISCLOSURE.......................................................... 99
F.1 ROHS II DIRECTIVE (2015/863/EU) ...................................................................... 100
F.2 CHINA ROHS.......................................................................................................... 101

HTB-210-Q470 Embedded System
Page ix
List of Figures
Figure 1-1: HTB-210-Q470 Embedded System ............................................................................2
Figure 1-2: Front Panel ..................................................................................................................3
Figure 1-3: Rear Panel....................................................................................................................3
Figure 1-4: Bottom Panel...............................................................................................................4
Figure 1-5: Dimensions (mm)........................................................................................................6
Figure 3-1: Top Cover Retention Screws...................................................................................13
Figure 3-2: HDD Access Panel Retention Screws.....................................................................14
Figure 3-3: HDD Bracket Retention Screws...............................................................................14
Figure 3-4: Inserting the HDD......................................................................................................15
Figure 3-5: Installing the HDD .....................................................................................................15
Figure 3-6: M.2 Slot Locations ....................................................................................................16
Figure 3-7: Removing the M.2 Module Retention Screw ..........................................................17
Figure 3-8: Inserting the M.2 Module into the Slot at an Angle................................................17
Figure 3-9: Securing the M.2 Module..........................................................................................17
Figure 3-10: PCIe Slot Locations ................................................................................................18
Figure 3-11: Clear CMOS Button.................................................................................................19
Figure 3-12: Power Button and Power LED ...............................................................................22
Figure 3-13: IEI Resource Download Center..............................................................................23
Figure 5-1: SO-DIMM Location ....................................................................................................67
Figure 5-2: SO-DIMM Installation ................................................................................................67
Figure 6-1: Main Board Layout Diagrams ..................................................................................69

HTB-210-Q470 Embedded System
Page x
List of Tables
Table 1-1: Technical Specifications..............................................................................................5
Table 2-1: Package List..................................................................................................................9
Table 2-2: Optional Item.................................................................................................................9
Table 3-1: RS-232/422/485 Serial Port Pinouts ..........................................................................20
Table 4-1: BIOS Options and Configured USB Ports................................................................55
Table 6-1: Peripheral Interface Connectors...............................................................................70
Table 6-2: +12V ATX Power Connector (CPU12V1 Pinouts......................................................71
Table 6-3: Audio Kit Connector (J_AUDIO1) Pinouts ...............................................................71
Table 6-4: Battery Connector (BAT1) Pinouts ...........................................................................71
Table 6-5: Buzzer Connector (SPK1) Pinouts............................................................................71
Table 6-6: Chassis Intrusion Connector (CHASSIS1) Pinouts.................................................72
Table 6-7: Debug Port Connector (DBG_PORT1) Pinouts .......................................................72
Table 6-8: Digital I/O Connector (DIO1) Pinouts........................................................................72
Table 6-9: Fan Connector (CPU_FAN1) Pinouts........................................................................72
Table 6-10: Front Panel Connector (F_PANEL1) Pinouts.........................................................73
Table 6-11: I2C Connector (I2C1) Pinouts...................................................................................73
Table 6-12: RS-232/422/485 Connector (COM1) Pinouts ..........................................................73
Table 6-13: SATA Connectors (S_ATA1, S_ATA2) Pinouts......................................................74
Table 6-14: SMBus Connector (SMB1) Pinouts.........................................................................74
Table 6-15: USB 2.0 Connector (USB2) Pinouts........................................................................74
Table 6-16: TPM Connector (TPM1) Pinouts..............................................................................75
Table 6-17: External Peripheral Connectors..............................................................................75
Table 6-18: Ethernet Connectors (LAN1) Pinouts.....................................................................76
Table 6-19: Ethernet Connector LEDs........................................................................................76
Table 6-20: HDMI Connector (HDMI1) Pinouts...........................................................................76
Table 6-21: USB/DP Connector (USB_C1) Pinouts ...................................................................77
Table 6-22: USB 3.2 Gen 1 Connectors (CN1, CN2) Pinouts....................................................77
Table 6-23: Jumpers.....................................................................................................................78
Table 6-24: AT/ATX Power Select Switch (J_ATX_AT1) Settings............................................78
Table 6-25: BIOS Select Switch (SW_BIOS1_1) Settings .........................................................78
Table 6-26: Flash Descriptor Security Override Jumper Settings...........................................79

HTB-210-Q470 Embedded System
Page xi

HTB-210-Q470 Embedded System
Page xii
List of BIOS Menus
BIOS Menu 1: Main.......................................................................................................................28
BIOS Menu 2: Advanced..............................................................................................................29
BIOS Menu 3: CPU Configuration...............................................................................................30
BIOS Menu 4: PCH-FW Configuration........................................................................................32
BIOS Menu 5: PTT Configuration................................................................................................33
BIOS Menu 6: Trusted Computing..............................................................................................34
BIOS Menu 7: ACPI Configuration..............................................................................................35
BIOS Menu 8: F81804 Super IO Configuration ..........................................................................36
BIOS Menu 9: Serial Port 1 Configuration Menu.......................................................................37
BIOS Menu 10: iWDD H/W Monitor .............................................................................................38
BIOS Menu 11: Smart Fan Mode Configuration ........................................................................39
BIOS Menu 12: RTC Wake Settings ............................................................................................42
BIOS Menu 13: Serial Port Console Redirection.......................................................................43
BIOS Menu 14: USB Configuration.............................................................................................45
BIOS Menu 15: Network Stack Configuration............................................................................46
BIOS Menu 16: NVMe Configuration...........................................................................................47
BIOS Menu 17: Chipset................................................................................................................48
BIOS Menu 18: System Agent (SA) Configuration....................................................................49
BIOS Menu 19: Memory Configuration.......................................................................................50
BIOS Menu 20: Graphics Configuration.....................................................................................50
BIOS Menu 21: PEG Port Configuration.....................................................................................52
BIOS Menu 22: PCH-IO Configuration........................................................................................53
BIOS Menu 23: PCI Express Configuration ...............................................................................55
BIOS Menu 24: PCI Express Port Submenu ..............................................................................56
BIOS Menu 25: SATA and RST Configuration...........................................................................57
BIOS Menu 26: HD Audio Configuration ....................................................................................58
BIOS Menu 27: Security...............................................................................................................59
BIOS Menu 28: Boot.....................................................................................................................60
BIOS Menu 29: Save & Exit..........................................................................................................62

HTB-210-Q470 Embedded System
Page 1
Chapter
1
1Introduction

HTB-210-Q470 Embedded System
Page 2
1.1 Overview
Figure 1-1: HTB-210-Q470 Embedded System
The HTB-210-Q470 embedded system supports 10th Generation Intel®Core™
i5-10500TE processor. It is designed for applications that require reliable operating and
easy maintenance features.
The HTB-210-Q470 provides one PCIe x16 slot and one PCIe x4 slot for building AI
applications by installing accelerator cards. Its I/O interfaces include two USB 3.2 Gen 1
ports, two USB 2.0 ports, two 2.5GbE, one serial port, one DP and one HDMI.
The HTB-210-Q470 series systems are all capable of supporting one 2.5" SATA 6Gb/s
solid-state drive (SSD) or M.2 SSD modules.
1.2 Features
The HTB-210-Q470 has the following features
Compact edge device with great computing and graphics performance
Supports 10th Gen. Intel® Core™ i5-10500TE CPU and Intel® Q470 chipset
Dual ECC & non-ECC unbuffered SO-DIMM slots supporting up to 128 GB of
memory
PCIe x16 slot supports NVIDIA GPU accelerator cards
PCIe x4 slot supports capture card or other applications

HTB-210-Q470 Embedded System
Page 3
1.3 Front Panel
An overview of the front panel is shown in 691H691H568HFigure 1-2 below.
Figure 1-2: Front Panel
1.4 Rear Panel
692H692H569H The rear panel of the HTB-210-Q470 provides access to the following external I/O
connectors, button and expansion slots as shown in Figure 1-3.
Figure 1-3: Rear Panel

HTB-210-Q470 Embedded System
Page 4
1.5 Bottom Panel
The bottom panel has a HDD access panel for HDD installation or replacement.
Figure 1-4: Bottom Panel
1.6 Technical Specifications
The specifications for the Intel based embedded systems are listed below.
HTB-210-Q470
CPU
Support Intel® Core™ i5-10500TE (6 cores, 35W TDP)
Chipset
Intel® Q470
System Memory
2 x 260-pin 2666/2133 MHz dual-channel DDR4 SO-DIMM
ECC/non-ECC unbuffered memory slot (system max. 128 GB)
Motherboard
IEI HPCIE-Q470 CPU card
Thermal Solution
Smart fan
Ethernet
2 x 2.5GbE connectors via Intel® I225-V PCIe controllers
Display
1 x HDMI output port (up to 4096x2304 @ 30Hz)
Serial Port
1 x RS-232/422/485 (DB-9)
USB
1 x USB/DP connector (USB Type-C)
2 x USB 2.0 ports
2 x USB 3.2 Gen 1 (5Gb/s) ports

HTB-210-Q470 Embedded System
Page 5
Storage
1 x 2.5" SATA 6Gb/s HDD/SSD bay
Expansion
1 x PCIe 3.0 x16 slot
1 x PCIe 3.0 x4 slot
1 x M.2 A-key 2230 slot (PCIe x2 and USB 2.0)
1 x M.2 M-key 2280 slot (PCIe x4 and SATA)
Button/Switch
1 x Power button
1 x AT/ATX switch (on-board)
Chassis Construction
Metal housing (SECC)
Power Requirement
19 V DC
Power Supply
180 W power adapter
100 V – 240 V AC input ,19 V DC output
Operating Shock
Half-sine wave shock 5G; 11ms; 100 shocks per axis
Operating Vibration
MIL-STD-810G 514.6C-1 (with SSD)
Operating Temperature
0ºC – 40ºC
Storage Temperature
-20ºC – 60ºC
Humidity
10% – 95%, non-condensing
Net Weight
2.8 kg
Dimensions (W x D x H)
140 mm x 306.7 mm x 171 mm
Supported Accelerator
Card
NVIDIA Quadro P2200 (75W)
NVIDIA Tesla T4 (75W)
Supported OS
Microsoft Windows 10
Linux
Safety/ECM
UL/ cUL
FCC Part 15 Class B
EN 62368-1 Ed.2 + RMF
EN 55032 + EN 55035
Table 1-1: Technical Specifications

HTB-210-Q470 Embedded System
Page 6
1.7 Dimensions
The dimensions of the HTB-210-Q470 are shown in 688H688H567HFigure 1-5.
Figure 1-5: Dimensions (mm)

HTB-210-Q470 Embedded System
Page 7
Chapter
2
2Unpacking

HTB-210-Q470 Embedded System
Page 8
2.1 Unpacking
To unpack the embedded system, follow the steps below:
Step 1: Use box cutters, a knife or a sharp pair of scissors that seals the top side of the
external (second) box.
Step 2: Open the external (second) box.
Step 3: Use box cutters, a knife or a sharp pair of scissors that seals the top side of the
internal (first) box.
Step 4: Lift the system out of the boxes.
Step 5: Remove both polystyrene ends, one from each side.
Step 6: Make sure all the components listed in the packing list are present.
Step 0:
2.2 Packing List
NOTE:
If any of the components listed in the checklist below are missing, do
not proceed with the installation. Contact the IEI reseller or vendor the
HTB-210-Q470 was purchased from or contact an IEI sales
representative directly by sending an email to [e-mail].
The HTB-210-Q470 embedded system is shipped with the following components: