IEI Technology ROCKY-4786 User manual

1
Socket-478 800MHz FSB CPU Card with VGA, GbE, LAN,
USB 2.0, SATA and Audio
ROCKY-4786
Quick Installation Guide
Version 4.1
Mar. 10, 2010
Package Contents
ROCKY-4786 package includes the following items:
l1x Rocky-4786 single board computer
l1 x HDD cable
l2 x SATA cable
l1 x SATA power cable
l1 x Keyboard/ PS2 mouse Y cable
l1x ATX-12V cable
l1 x RS-232 cable
l1 x USB cable
l1 x mini jumper pack
l1 x Utility CD
l1 x QIG (Quick Installation Guide)
©2006Copyright by IEI Technology corp.
All rights reserved.
StockCheck.com

2
Specifications
lCPU: Socket 478 for Intel P4/Prescott/Celeronwith 533/800
MHzFSB
lSystem Chipset: Intel®865G + ICH5
lSystem Memory: Dual channel DDR 333/400 SDRAM socket
support up to 2GB
lEthernet: Intel® 82562 ET for 10/100Mbps and 82547 for
10/100/1000 Mbps
lI/O Interface:
2x RS-232 serial port by pin header
8x USB2.0
1x SATA 150
1xIDE ATA-100 (40 pin header with 2.54mm pitch)
1x FDD (34 pin with 2.54mm pitch)
1x LPT by pin header
1 x 6-pin pin header for PS/2 KB/MS
1 x IrDA
lGraphic: Integrated in Intel® 865G
lAudio: AC’97 Audio Codec
lSSD: 1 x Compact Flash Type II Socket
lWatchdog timer: Software programmable 1-255 sec. for
System Reset.
lPower Consumption:
+12V@7.52A,-12V@500mA,5V@6.98A(P43.0GHzFSB800
MHz; Dual channel DDR 400 512 SDRAM)
lOperation Temperature: 0 ~ 60°C( 32°F ~ 140°F)
lWeight: 1.1Kg
Ordering Information
Standard:
ROCKY-4786EV-RS-R41:
PICMG Socket-478 800MHz FSB Based CPU card with VGA, LAN, USB
2.0, S-ATA and Audio
StockCheck.com

3
ROCKY-4786EV-RS-R41:
PICMG Socket-478 800MHz FSB Based CPU card with VGA, LAN, GbE,
USB 2.0, S-ATA and Audio
Optional:
32200-000017-RS: FDD cable
19800-000049-RS: LPT cable with Bracket
Jumpers setting and Connectors
Label Function
IDE1 & IDE2 Ultra ATA100 Primary & Secondary IDE connectors
FDD1 Floppy connector
LPT1 Parallel port connector
COM1 & COM2 Serial port connectors
CF1 Compact Flash Storage Card Type II connector
IR1 IRDA infrared interface port
USB1 USB dual port connector
USB2 USB dual port connector
USB3 USB dual port connector
USB4 USB dual port connector
LAN1 & LAN2 LAN RJ45 connectors
KB/MS1 6-pin Mini-Din Keyboard & Mouse connector
CN5 External 5-pin Header Keyboard Connector
FAN1 & FAN2 FAN connectors
SATA1 & SATA2 Serial ATA connectors
CN1 External switches and indicators
CN2 ATX +12V Power connector
CD-IN Audio CD in connector
LINE-IN Audio LINE in connector
MIC-IN Audio MIC in connector
PW-SW1 ATX Power Button connector
ATXCTL Backplane to Main board ATX power control
Connector
StockCheck.com

4
-SPK_OUT : AUDIO Headphone Jack (Output)
-LINE-IN : AUDIO LINE-IN Connector (Input)
-CD-IN : AUDIO CD-IN Connector (Input)
-MIC-IN : AUDIO MIC-IN Connector (Input)
DESCRIPTION
PIN
LINE-IN CD-IN MIC-IN
1LEFT LEFT MIC-IN
2GND GND GND
3GND GND GND
4RIGHT RIGHT NC
DVI1:DVI Connector
PIN DESCRIPTION PIN DESCRIPTION
1DATA2-14 Vcc
2DATA2+ 15 NC
3GND 16 HP_DET
4NC 17 DATA0-
5NC 18 DATA0+
6DDCCLK 19 GND
7DDCDATA 20 NC
8NC 21 NC
9DATA1-22 GND-
10 DATA1+ 23 CLK+
11 GND 24 CLK-
12 NC 25 GND
13 NC
CN1:External Switches and indicators
PIN DESCRIPTION PIN DESCRIPTION
1+5V 2Speaker +
3N/C 4N/C
Power
LED 5GND6N/C
7NC 8Speaker -
Speaker
9NC 10
Reset PIN1
11 GND 12 Reset PIN2 Reset
Button
HDD
LED 13
HDD LED+ 14 HDD LED-HDD
LED
StockCheck.com

5
CN2: ATX +12 Power Connector
PIN DESCRIPTION PIN DESCRIPTION
1GND 2GND
3+12V 4+12V
CN5: 5-pin Header
keyboard Connector
PIN DESCRIPTION
1KEYBOARD CLOCK
2KEYBOARD DATA
3N/C
4GROUND
5+5V
PW-SW1: ATX Power
Button Connector
PIN DESCRIPTION
1PWRBTN
2GND
FAN1, FAN2:
Fan Connector
PIN DESCRIPTION
1GND
2+12V
3Rotation Signal
JP1: CompactFlash
MasterSlave Setting
JP1 DESCRIPTION
Short Master
Open Slave
IR1:IrDA Connector
PIN DESCRIPTION
1VCC
2NC
3IR-RX
4GND
5IR-TX
6CIRRX
CN3: LAN1/CN4 LAN2 State
LED Connector
PIN DESCRIPTION
1-2 ACT LED (PIN2:+)
3-4 LINK LED (PIN4:+)
ATXCTL: Backplane to
Mainboard Connector
PIN DESCRIPTION
15VSB
2ATX-ON
3GND
JP2: Clear CMOS Setup
JP2 DESCRIPTION
1-2 or Open
(Default)* Keep CMOS Setup (Normal Operation)
2-3Clear CMOS Setup
StockCheck.com

6
JP4: CPU Type Setting
JP4 DESCRIPTION
Short (1-2) Pentium4 CPU
Short (2-3) Pentium4-M CPU
USB1, USB2, USB3, USB4:
2 Ports USB Connector
PIN DESCRIPTION PIN DESCRIPTION
1VCC2GROUND
3DATA0-4DATA1+
5DATA0+ 6DATA1-
7GROUND 8VCC
COM1, COM2: 10-Pin Serial Port Connector
PIN DESCRIPTION
1DATA CARRIER DETECT (DCD)
2RECEIVE DATA (RXD)
3TRANSMIT DATA (TXD)
4DATA TERMINAL READY (DTR)
5GROUND (GND)
6DATA SET READY (DSR)
7REQUEST TO SEND (RTS)
8CLEAR TO SEND (CTS)
9RING INDICATOR (RI)
10 GROUND (GND)
StockCheck.com

7
Board Layout: Jumper and Connector Locations
StockCheck.com