IEI Technology gKINO-V1000 Series User manual

Mini-ITX SBC supports AMD® Ryzen™ Embedded V1000/R1000
Series Onboard SoC, DDR4, Triple/Quadruple DP, Dual GbE, M.2,
SATA 6Gb/s, USB 3.2 Gen 1, COM, TPM 2.0, HD Audio and RoHS
gKINO-V/R1000
Quick Installation Guide
Version 1.0
August 27, 2020
Package List
gKINO-V/R1000 package includes the following items:
1 x gKINO-V/R1000 single board computer with CPU cooler
1 x I/O shielding
1 x SATA cable
1 x QIG
©2020 Copyright by IEI Integration Corp.
All rights reserved.

1
Specifications
SoC:
AMD® Ryzen™ Embedded V1605B (quad core, 2 MB cache,
8 CU, 2.0 GHz / up to 3.6 GHz, 12 W – 25 W)
AMD® Ryzen™ Embedded V1202B (dual core, 1 MB cache, 3
CU, 2.3 GHz / up to 3.2 GHz, 12 W – 25W)
AMD® Ryzen™ Embedded R1606G (dual core, 1 MB cache, 3
CU, 2.6 GHz / up to 3.5 GHz, 12 W – 25W)
AMD® Ryzen™ Embedded R1505G (dual core, 1 MB Cache,
3 CU, 2.4 GHz / up to 3.3GHz, 12 W – 25W)
BIOS:AMI BIOS
Memory:
Two 260-pin 2400 MHz DDR4 SDRAM SO-DIMM slots with
ECC support (system max. 64 GB)
Graphics:
AMD RadeonTM VEGA series graphics
AMD Radeon™ GPUs (Radeon™ HD 7000 series), support
DX11, UVD3 H.264, VC-1, MPEG-2, DivX Direct X® 11, Open
CL™ 1.1, OpenGL 4.2
Display Output:
gKINO-V1000: 4 x DP (4K UHD, 3840x2160)
gKINO-R1000: 3 x DP (4K UHD, 3840x2160)
Ethernet: Dual Realtek RTL8119I PCIe GbE controller
External I/O Interfaces:
2 x RS-232
2 x USB 3.2 Gen 1 (5Gb/s)
2 x USB 2.0
Internal I/O Interfaces:
1 x SATA 6Gb/s with 5V/12V output
1 x SATA power connector
2 x RS-232 (support ccTalk, TTL) (1x4 pin, P=2.54)
2 x USB 2.0 (2x4 pin, P=2.0)
4 x RS-232 (2x5 pin, P=2.00)

2
Audio:
Realtek ALC662 HD audio codec
1 x Digital output connector (S/PDIF)
2 x 6W audio amplifier connector (L+R)
2 x Audio jack (line-out and mic-in)
1 x Front audio connector by 10-pin (2x5) header
Front Panel:
1 x Front panel (2x7 pin, power LED, HDD LED, speaker,
power button, reset button)
LAN LED: 2 x LAN LED (1x2 pin)
SMBus: 1 x SMBus (1x4 pin)
I²C: 1 x I²C (1x4 pin)
Digital I/O: 8-bit digital I/O (2x5 pin)
Expansion :
1 x M.2 2242/2280 M-key slot (SATA + PCIe x2 signal)
1 x PCIe x16 slot (with PCIe 3.0 x8 signal)
Watchdog Timer:
Software programmable, support 1~255 sec. system reset
Chassis Intrusion Detection:
1 x Chassis intrusion connector (1x2 pin)
Fan Connector:
1 x CPU smart fan (1x4 pin)
1 x System smart fan (1x4 pin)
Power Supply:
12V DC input
Support AT/ATX mode
1 x Internal power connector (2x2 pin)
1 x External DC jack (4-pin DIN)
Power Consumption:
12 V @ 5.144 A (AMD Ryzen V1605B 2.0 GHz CPU with 32
GB 2666 MHz DDR4 memory)
12 V @ 5.146 A (AMD Ryzen R1606G 2.6 GHz CPU with 32
GB 2666 MHz DDR4 memory)

3
Operating Temperature: 0°C ~ 60°C
Storage Temperature: -10°C ~ 70°C
Operation Humidity: 5% ~ 95%, non-condensing
Dimensions: 170mm x 170 mm
Weight: GW: 900g / NW: 400g
Safety: CE, FCC
Ordering Information
gKINO-V1605B-R10:
Mini-ITX SBC supports AMD® Ryzen™ Embedded V1605B onboard
SoC (quad-core 2.0GHz, 15W), DDR4, quadruple independent
displays, quadruple DP, dual GbE, SATA 6Gb/s, USB 3.2 Gen 1, M.2,
COM, TPM 2.0, HD audio and RoHS
gKINO-V1202B-R10:
Mini-ITX SBC supports AMD® Ryzen™ Embedded V1202B onboard
SoC (dual-core 2.3GHz, 15W), DDR4, quadruple independent
displays, quadruple DP, dual GbE, SATA 6Gb/s, USB 3.2 Gen 1, M.2,
COM, TPM 2.0, HD audio and RoHS
gKINO-R1606G-R10:
Mini-ITX SBC supports AMD® Ryzen™ Embedded R1606G onboard
SoC (dual-core 2.6GHz, 15W), DDR4, triple independent displays,
triple DP, dual GbE, SATA 6Gb/s, USB 3.2 Gen 1, M.2, COM,
TPM 2.0, HD audio and RoHS
gKINO-R1505G-R10:
Mini-ITX SBC supports AMD® Ryzen™ Embedded R1505G onboard
SoC (dual-core 2.4GHz, 15W), DDR4, triple independent displays,
triple DP, dual GbE, SATA 6Gb/s, USB 3.2 Gen 1, M.2, COM,
TPM 2.0, HD audio and RoHS

4
19800-000300-100-RS:
RS-232 cable with bracket, 300mm, P=2.0
CB-USB02A-RS:
Dual-port USB cable with bracket, 300mm, P=2.0
TPM-IN02-R20:
20-pin Infineon TPM module, software management tool,
firmware v5.5
All the drivers and utilities for the
gKINO-V/R1000 series are available on
IEI Resource Download Center. Type the
model name and press Enter to find all
the relevant software, utilities, and
documentation. To install software from
the downloaded ISO file, mount the file
as a virtual drive to view its content.
IEI Resource Download Center
https://download.ieiworld.com

5
Jumpers Setting and Connectors
LABEL
FUNCTION
J_ATX_AT1 AT/ATX Power Mode Setting
J_CMOS1
Clear CMOS Setup
CPU12V1
12 V DC-IN power connector
AUDIO2 Audio connector
SPK_L1, SPK_R1
Audio amplifier connectors
BAT1
Battery connector
COM7, COM8
ccTalk connectors
CHASSIS1 Chassis intrusion connector
DIO1
Digital I/O connector
CN1
EC debug connector
CPU_FAN1 Fan connector, CPU
SYS_FAN1
Fan connector, system
F_PANEL1
Front panel connector
I2C1 I2C connector
LED_LAN1, LED_LAN2
LAN LED connectors
M2_M2
M.2 slot
CHA_DIMM0, CHB_DIMM0
Memory slots
PCIEX16 PCIe x16 slot
PWR_SW1
Power button
COM3, COM4, COM5,
COM6
Internal RS-232 serial port connectors
S_ATA1
SATA 6Gb/s drive connector
SATA_PWR1
SATA power connector
SMB1 SMBus connector
SPDIF1
S/PDIF connector
JSPI_BIOS_1
SPI flash connector, BIOS
JSPI_EC1 SPI flash connector, EC
TPM1
TPM connector
USB_CON1
Internal USB 2.0 connector
POWER_IN1
12 V DC-IN power jack
AUDIO1
External audio jacks

6
DP0_1, DP2_3
External DisplayPort connectors
LAN1_USB1
LAN and USB 3.2 Gen 1 combo connector
LAN2_USB2
LAN and USB 2.0 combo connector
COM1_2
External RS-232 connectors
J_ATX_AT1: AT/ATX Power Mode Setting
PIN NO.
DESCRIPTION
Short 1-2 (Right)
ATX Power Mode (default)
Short 2-3 (Left)
AT Power Mode
J_CMOS1: Clear CMOS Setup
PIN NO.
DESCRIPTION
NC
Keep CMOS Setup
(Normal Operation)
Press button
Clear CMOS Setup
CPU12V1: 12 V DC-IN Power Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
GND
2
GND
3 12V 4 12V
AUDIO2: Audio Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
LMIC2-L
2
GND
3
LMIC2-R
4
PRE-SENSE#
5
LLINE2-R
6
MIC2-JD
7
FRONT-IO
8
N/C
9
LLINE2-L
10
LINE2-JD
SPK_L1, SPK_R1: Audio Amplifier Connectors
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
SPK+
2
SPK-

7
COM7, COM8: ccTalk Connectors
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
+12V
2
N/C
3
GND
4
ccTalk DATA
CHASSIS1: Chassis Intrusion Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
CHASSIS OPEN#
2
GND
DIO1: Digital Input/Output Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
GND
2
VCC
3
Output 3
4
Output 2
5
Output 1
6
Output 0
7
Input 3
8
Input 2
9
Input 1
10
Input 0
CPU_FAN1, SYS_FAN1: Fan Connectors
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
GND
2
+12V
3
FANIO
4
PWM
F_PANEL1: Front Panel Connector
PIN
DESCRIPTION
PIN
DESCRIPTION
Power
LED
1
+5V
2
Beep_PWR
Speaker
3
N/C
4
N/C
5
GND
6
N/C
Power
Button
7
PWRBTN-
8
PC_Beep
9
GND
10
N/C
Reset
HDD
LED
11
+5V
12
Reset-
13
SATA_LED-
14
GND

8
I2C1: I2C Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
GND
2
I2C_DAT
3
I2C_CLK
4
+5V
LED_LAN1, LED_LAN2: LAN Link LED Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
+3.3V
2
LAN_LED_LNK#_ACT
COM3, COM4, COM5, COM6: Internal RS-232 Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
DCD
2
DSR
3
RX
4
RTS
5
TX
6
CTS
7
DTR
8
RI
9
GND
10
GND
S_ATA1: SATA 6Gb/s Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
GND
2
TX+
3
TX-
4
GND
5
RX-
6
RX+
7
GND
SATA_PWR1: SATA Power Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
+12V
2
GND
3
GND
4
+5V
SMB1: SMBus Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
GND
2
SMB_DATA
3
SMB_CLK
4
+5V

9
SPDIF1: S/PDIF Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
+5V
2
N/C
3
SPDIF OUT
4
GND
5
SPDIF IN
JSPI_BIOS_1: BIOS SPI Flash Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
+3.3V
2
SPI_CS#
3
SPI_SO
4
SPI_CLK
5
SPI_SI
6
GND
JSPI_EC1: EC SPI Flash Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
+3.3V
2
SPI_CS#
3
SPI_SO
4
SPI_CLK
5
SPI_SI
6
GND
TPM1: Trusted Platform Module Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
LCLK
2
GND
3
LFRAME#
4
KEY
5
LRERST#
6
+5V
7
LAD3
8
LAD2
9
+3.3V
10
LAD1
11
LAD0
12
GND
13
SCL
14
SDA
15
SB3V
16
SERIRQ
17
GND
18
GLKRUN#
19
LPCPD#
20
LDRQ#

10
USB_CON1: Internal USB 2.0 Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
VCC
2
GND
3
USB_DATA-
4
USB_DATA+
5
USB_DATA+
6
USB_DATA-
7
GND
8
VCC
POWER_IN1: 12 V DC-IN Power Jack
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
12V
2
GND
3
12V
4
GND
5
GND
AUDIO1: External Audio Jacks
PIN NO.
DESCRIPTION
Line_Out
(Green)
Connect this port to headphone or speaker
Microphone
(Pink)
Connect this port to microphone
DP0_1, DP2_3: External DisplayPort Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
DATA_0P
11
GND
2
GND
12
DATA_3N
3
DATA_0N
13
CONFIG1
4
DATA_1P
14
CONFIG2
5
GND
15
AUX_P
6
DATA_1N
16
GND
7
DATA_2P
17
AUX_N
8
GND
18
DP HPD
9
DATA_2N
19
GND
10
DATA_3P
20
DP PWR

11
LAN1_USB1, LAN2_USB2: Ethernet and USB Connectors
USB1: External USB 3.2 Gen 1 (5Gb/s) Connectors
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
VCC
10
VCC
2
USB_DATA-
11
USB_DATA-
3
USB_DATA+
12
USB_ DATA+
4
GND
13
GND
5
USB3_RX-
14
USB3_RX-
6
USB3_RX+
15
USB3_ RX+
7
GND
16
GND
8
USB3_TX-
17
USB3_TX-
9
USB3_TX+
18
USB3_TX+
USB2: External USB 2.0 Connectors
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
VCC
2
USB_DATA-
3
USB_DATA+
4
GND
5
VCC
6
USB_DATA-
7
USB_DATA+
8
GND
LAN1, LAN2: RJ-45 LAN Connectors
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1 MDIA0+ 5 MDIA2-
2
MDIA0-
6
MDIA1-
3
MDIA1+
7
MDIA3+
4
MDIA2+
8
MDIA3-
COM1_2: External RS-232 Serial Port Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
DCD
2
RX
3
TX
4
DTR
5
GND
6
DSR
7
RTS
8
CTS
9
RI

12
Board Layout: Jumper and Connector Locations (Unit: mm)

13