Ikan PT-Elite-UGK User manual

PT-Elite-UGK
Elite iPad Teleprompter Upgrade Kit
QUICKSTART GUIDE
www.ikancorp.com
3903 Stoney Brook Dr. Houston TX 77063
1.713.272.8822
[email protected]
© 2010 ikan Corporation. All right reserved
CONDITIONS OF WARRANTY SERVICE
• Free service for one year from the day of purchase if the problem is caused by manufacturing errors.
• The components and maintenance service fee will be charged if the warranty period has expired.
Free Service will not be Provided in the Following Situations: (*Even if the product is still within the warranty period.)
• Damage caused by abuse or misuse, dismantling, or changes to the product not made by the company.
• Damage caused by natural disaster, abnormal voltage, and environmental factors etc.

LBP-03
Page 1
What’s included
Checked by
PT-Elite-UGK
Elite iPad Teleprompter Upgrade Kit QUICKSTART GUIDE
www.ikancorp.com 713-272-8822
 Glass Frame
 iPad Teleprompter Mount
 30/70 Prompter Glass Hood
 iPad Protection Bumper
 2 x 4mm X 20mm Socket
Head Countersink Screw
 1 x D-Ring
 1 x HEX KEY 3mm
1 x HEX KEY 1/8 inch

LBP-03
LBP-03
Page 2
www.ikancorp.com 713-272-8822
PT-Elite-UGK
Elite iPad Teleprompter Upgrade Kit QUICKSTART GUIDE
GETTING STARTED
1. Loosen the thumb screw. Turn LBP-03 90°and tighten it.
2. Slide the iPad Mount through the iPad Protection Bumper.
Note: The use of the iPad Protection Bumper
is optional. It is intended to help prevent
scratches or wear on your iPad.

Page 3
www.ikancorp.com 713-272-8822
PT-Elite-UGK
Elite iPad Teleprompter Upgrade Kit QUICKSTART GUIDE
3. Fit Frame to iPad Mount. Secure with 2 x Socket Head Countersink Screw.
LBP-03
Bottom view of iPad Mount and Frame.
** Align the 2 holes under the iPad Mount to the highlighted
sets of holes on LBP-03.
**

Bracket
Page 4
Vertical Adjustments to the frame
can be made by loosening the
Hex Screws located on the inside
of the unit.
Front view
www.ikancorp.com 713-272-8822
PT-Elite-UGK
Elite iPad Teleprompter Upgrade Kit QUICKSTART GUIDE
4. Remove 4 x small frame screws and 2 x brackets. Insert prompter glass into frame. Secure
prompter glass by replacing brackets and screws.
NOTE: Each side of a piece of 30/70
teleprompting glass has a different amount
of reectivity. If the glass is not installed in
the proper orientation then the user may
experience a “double image” or “ghosting”
effect on the image being reected on the
teleprompter. To eliminate this, the glass
must simply be removed from the frame
and ipped.
** Glass with more reectivity side faces out.

Page 5
www.ikancorp.com 713-272-8822
PT-Elite-UGK
Elite iPad Teleprompter Upgrade Kit QUICKSTART GUIDE
5. Secure your 15mm rod based system to the Rod Clamp.
Rod Clamp

6. Apply Velcro to Glass Frame border. Attach Hood.
Page 6
www.ikancorp.com 713-272-8822
PT-Elite-UGK
Elite iPad Teleprompter Upgrade Kit QUICKSTART GUIDE