IKEA PATRULL User manual

PATRULL
© Inter IKEA Systems B.V. 2009 AA-476484-2

7

ENGLISH 4
6
6

Technical specications
Dimensions: 355 x 435 x 310 mm
Weight: approx. 5 kg
Air ow rate: 54-130 m3/h
Sound rating: 31-46 dB(A)
Filter: Flimmer®lter
Electrical data: single phase 230 V, 25 VA,
50 Hz
Declaration of conformity
IKEA of Sweden AB declares under sole
responsibility that the IKEA FAMILY air
cleaner, to which this declaration relates is in
conformity with the following LVD standards:
EN 60335-1, according to the terms of
directive 73/23/EEC with the addition of
93/68/EEC. This product also complies with
the following EMC standards: EN 61000-3-3,
EN 61000-3-2, EN 55014-1 and EN 55014-2
according to the terms of directive 89/336/
EEC with the addition of 92/31/EEC and
93/68/EEC.
Manufacturer
IKEA of Sweden AB
SE-343 81 Älmhult, Sweden
54
About IKEA FAMILY air cleaner
The IKEA FAMILY air cleaner is a circulation
air cleaner for indoor home use.
The unit contains a replaceable
Flimmer®lter.
Important safety information
Read the assembly and user instruction
carefully before using the unit. Keep this
information for further reference.
Warning!
If the supply cord is damaged, it must
be replaced by the manufacturer, the
manufacturer´s service agent or similarly
qualied persons in order to avoid a
hazard. Children or inrm persons must not
use product without supervision. For indoor
use only. Not to be used in wet rooms.
Run modes
30 dB(A), 50m3/h, 8W
42 dB(A), 108m3/h, 14W
45 dB(A), 135m3/h, 32W
Exhaust options
The ltered air can be directed in the
following ways:
Filter replacement
When replacing the lter it is essential that
the user proceeds as follows:
Warning!
The power supply cord must be
disconnected during lter replacement!
1. Disconnect the power and wait until the
fan has stopped.
2. Press the button on the back of the unit
marked with the symbol to release the
hood and lift the hood off.
3. Remove the used lter box. Please note
instruction on label for disposal of lter.
4. Clean inside, removing all dust and dirt.
5. Insert the new lter box. Ensure that the
lter is mounted in the right direction. Please
note information on lter label regarding
mounting direction. For your own record,
please write replacement date on label. Do
not touch the immer lters.
6. Attach the hood.
7. Reconnect the power supply cord.
ENGLISH