IKEA LIVBOJ User manual

LIVBOJ

English
Français
Español
6
16
28

6English
Charger features
• USB power adapter (5V min 2A) and USB
Type-C cable not included.
• Wirelessly charges Qi-compatible devices.
• Compatible with Qi 1.2.4BPP specication.
• Temperature and power monitor for safety.
• LED status indicator.
Instructions for use
• Connect the USB cable to the power adapter
and to LIVBOJ . Plug it into the wall socket.
• For wireless charging, place the device to be
charged on top of the plus sign (+) on the
charger. The device must be placed directly
over the plus sign (+) on the charger for the
charging function to work optimally. Note that
on some devices you may have to activate

7
wireless charging in settings.
• If your battery is completely discharged, it may
take a few minutes before it starts charging.
This is entirely normal. You can see that the
battery has begun charging when the battery
symbol appears on your phone.
LED indicator (see illustrations):
1. Power on: LED lights up for 3 seconds.
2. Charging: LED on.
3. Charging completed: LED o.
4. Error: LED ashes.
Good to know
• USB cable length and quality inuences
charging speed and performance.
• Devices may get warm during charging; this is

8
completely normal and they will gradually cool
down again after they are fully charged.
• Charging time may vary based on the device’s
battery capacity, charge level, the age of
the battery and the temperature in the
surrounding area.
• Charger storage temperature: -20°C to 25°C
(-4°F to 77°F).
• Charger operating temperature: 0°C to 40°C
(32°F to 104°F).
Unplug the charger from the power source
before cleaning and when it is not in use.
To clean the charger, wipe with a moist cloth.
Never submerge the charger in water.

9
Recommended precautionary measures and
technical data: see the back of the charger.
Save these instructions for future use.
WARNING:
• Only charge devices that are Qi-compatible.
• The wall socket must be located near the
equipment and must be easily accessible.
• Only use in dry locations.
• Children should be supervised to ensure they
do not play with the product.
• Never use a damage or faulty USB cable for
charging, since this can damage the appliance
and harm your device.

10
Product servicing
Do not attempt to repair this product yourself,
as opening or removing covers may expose you
to dangerous voltage points or other risks.
TECHNICAL DATA
Type: E2010 LIVBOJ
Input: 5V DC, min 2A USB Type-C
Indoor use only
Operating frequency: 110.3KHZ - 148 KHz
Output power: 33 dBµA/m at 3m
Manufacturer: IKEA of Sweden AB
Address: Box 702, SE-343 81 Älmhult, SWEDEN

11
The ‘Qi’ symbol is a trademark of the Wireless
Power Consortium
RF EXPOSURE INFORMATION
According to RF exposure regulations, under
normal operations the end user shall refrain
from being closer than 10 cm from the device.
This device complies with Part 15 of the FCC
Rules/Innovation Science and Economic
Development Canada's licence-exempt RSS
standard(s). Operation is subject to the following
two conditions:

12
(1) this device may not cause harmful
interference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation of the device.
WARNING:
Any changes or modications to this unit not
expressly approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.
NOTE:
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits

13
are designed to provide reasonable protection
against harmful interference in a residential
installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning
the quipment o and on, the user is encouraged
to try to correct the interference by one or more
of the following measures:

14
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on a
circuit dierent from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV
technician for help.

15
The crossed-out wheeled bin symbol indicates
that the item should be disposed of separately
from household waste. The item should be
handed in for recycling in accordance with local
environmental regulations for waste disposal.
By separating a marked item from household
waste, you will help reduce the volume of waste
sent to incinerators or land-ll and minimize any
potential negative impact on human health and
the environment. For more information, please
contact your IKEA store.

16Français
Caractéristiques du chargeur
• Adaptateur USB (5V min 2A) et câble USB
Type-C non inclus.
• Appareils de charge sans l compatibles avec
la technologie Qi.
• Conforme à la norme Qi 1.2.4BPP.
• Contrôle température et charge pour plus de
sécurité.
• Voyant d’état LED.
Instructions d'utilisation
• Raccorder le câble USB à l’adaptateur et à
LIVBOJ, puis brancher à une prise de courant.
• Pour le chargement sans l, placer le
téléphone sur le signe (+) du chargeur.
L'appareil doit être placé précisément sur le
signe (+) du chargeur pour un chargement

17
optimal. Sur certains appareils, il est
nécessaire d’activer la fonction de chargement
sans l dans les paramètres pour que le
chargement fonctionne.
• Si la batterie est complètement déchargée,
elle peut mettre quelques minutes avant de
commencer à se recharger. Cela est tout à
fait normal. Lorsque le symbole de la batterie
apparaît sur le téléphone cela indique le début
du chargement.
Voyant lumineux LED (voir illustrations) :
1. En fonctionnement : la LED s’allume
pendant 3 secondes.
2. En chargement : la LED est allumée.
3. Chargement terminé : la LED s’éteint.
4. Erreur : la LED clignote.

18
Bon à savoir
• La longueur et la qualité du câble USB
inuent sur la vitesse et la performance du
chargement.
• Il est tout à fait normal que les appareils
chauent au cours du chargement ; ils
refroidiront progressivement une fois qu’ils
seront entièrement chargés.
• La durée du chargement peut varier en
fonction de la capacité de la batterie de
l’appareil, du niveau de charge, de l’âge de la
batterie et de la température ambiante.
• Température de stockage du chargeur : -20 °C
à 25 °C (-4 °F à 77 °F).
• Température de fonctionnement du chargeur :
0 °C à 40 °C (32 °F à 104 °F).

19
Débranchez le chargeur de la source
d’alimentation avant de procéder à son
nettoyage et lorsqu’il n’est pas utilisé.
Pour nettoyer le chargeur, essuyez-le avec un
chion humide. Ne jamais plonger le chargeur
dans l’eau.
Mesures de précaution recommandées et
données techniques.
Se reporter au dos du chargeur.
Conserver ces instructions en vue d’une
utilisation ultérieure.

20
ATTENTION :
• Ne charger que des appareils compatibles
avec la technologie Qi.
• La prise murale doit être proche de
l’équipement et facilement accessible.
• Utiliser dans des endroits secs uniquement.
• Veiller à ce que les enfants ne jouent pas avec
ce produit.
• Ne jamais utiliser pour le chargement un câble
USB endommagé ou présentant un défaut, car
cela peut abîmer l’équipement ainsi que votre
appareil.
Réparation du produit
Ne pas tenter de réparer soi-même ce produit ;
soulever ou retirer le couvercle du boîtier risque