Impex MARCY PL-10510 User manual

NOTE:
Please read all instructions
carefully before using this
product
Safety Notice
Hardware Identifier
Assembly Instruction
Parts List
Warranty
Ordering Parts
Model
PL 10510
Retain This
Manual for
Reference
06-12-02
OWNER'S
MANUAL
MARCY BODY CYCLE
PL-10510
IMPEX FITNESS PRODUCTS
14777 DON JULIAN RD., CITY OF INDUSTRY, CA 91746
Tel: [phone] Fax: [phone]
www.impex-fitness.com
[email protected]

TABLE OF CONTENTS
BEFORE YOU BEGIN...................................................................................…. 1
IMPORTANT SAFETY NOTICES..................................................................…. 2
HARDWARE IDENTIFIER.....…....................................................................…. 3
ASSEMBLY INSTRUCTIONS........................................................................…. 4
EXPLODED DIAGRAM………………………………………………………………. 8
PARTS LIST...................................................................................................…. 9
COMPUTER................................................................................................…… 10
WARRANTY.................................................................................................…. 11
ORDERING PARTS.......................................................................................… 11
BEFORE YOU BEGIN
Thank you for selecting the MARCY Body Cycle Fan Bike PL-10510 by
IMPEX FITNESS PRODUCTS. For your safety and benefit, read this
manual carefully before using the machine. As a manufacturer, we are
committed to provide you complete customer satisfaction. If you have any
questions, or find there are missing or damaged parts, we guarantee you
complete satisfaction through direct assistance from our factory. To avoid
unnecessary delays, please call our TOLL-FREE customer service number.
Our Customer Service Agents will provide immediate assistance to you.
1
Toll-Free Customer Service Number
1-800-999-8899
Mon. - Fri. 9 a.m. - 5 p.m. PST
www.impex-fitness.com
[email protected]m

IMPORTANT SAFETY NOTICE
PRECAUTIONS
This exercise machine is built for optimum safety. However, certain precautions apply
whenever you operate a piece of exercise equipment. Be sure to read the entire manual
before you assemble or operate your machine. In particular, note the following safety
precautions:
1. Keep children and pets away from the machine at all times. DO NOT leave
children unattended in the same room with the machine.
2. Only one person at a time should use the machine.
3. If the user experiences dizziness, nausea, chest pain, or any other abnormal
symptoms, STOP the workout at once. CONSULT A PHYSICIAN IMMEDIATELY.
4. Position the machine on a clear, leveled surface. DO NOT use the machine near water
or outdoors.
5. Keep hands away from all moving parts.
6. Always wear appropriate workout clothing when exercising. DO NOT wear robes or
other clothing that could become caught in the machine. Running or aerobic shoes are
also required when using the machine.
7. Use the machine only for its intended use as described in this manual. DO NOT use
attachments not recommended by the manufacturer.
8. Do not place any sharp object around the machine.
9. Disabled person should not use the machine without a qualified person or physician in
attendance.
10. Before using the machine to exercise, always do stretching exercises to properly warm
up.
11. Never operate the machine if the machine is not functioning properly.
12. The Maximum Weight Capacity is 300 lbs.
13. Read all warnings posted on the exercise bike.
14. Inspect the exercise bike for worn or loose component prior to use. Tighten/replace
any loose or wore components prior to use.
15. Care should be taken in mounting or dismounting the exercise bike.
16. This exercise bike is only for consumer use only.
WARNING: BEFORE BEGINNING ANY EXERCISE PROGRAM, CONSULT YOUR
PHYSICIAN. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE AGE
OF 35 OR PERSONS WITH PRE-EXISTING HEALTH PROBLEMS. READ ALL
INSTRUCTIONS BEFORE USING ANY FITNESS EQUIPMENT. IMPEX INC. ASSUMES
NO RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE
SUSTAINED BY OR THROUGH THE USE OF THIS PRODUCT.
SAVE THESE INSTRUCTIONS. 2

3

ASSEMBLY INSTRUCTION
Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen
Wrenches
NOTE: It is strongly recommended this machine be assembled by two or more
people to avoid possible injury.
STEP 1 (See Diagram1)
A.) Attach the Front Stabilizer (#13) to the Main Frame (#1). Secure it with two M8 x 2 ½”
Carriage Bolts (#15), ∅5/8” Bent Washers (#14), and M8 Acorn Nuts (#16).
B.) Insert the Rear Stabilizer (#10) into the rear bottom of Main Frame (#1). Secure it with
three M8 x 5/8” Allen Bolts (#12) and ∅5/8” Washers (#11). Diagram 1
4

STEP 2 (See Diagram 2)
A.) Insert the Axle (# 4) into the Pivot on the Main Frame (#1). Attach the Left and Right
Handlebars (#2) & (#31) onto the Axle from both sides. Secure the Axle with two ∅
7/8” Washers (#7) and M8 Nylon Nuts (#8). Close both ends with two plastic Axle End
Caps (#9).
B.) Insert the Lower Handlebar (#3) into the Left Handlebar (#2). Secure it with two M6 x
5/8” Allen Bolts (#6) and ∅½” Washers (#5). Repeat same procedure to install the
other side.
DIAGRAM 2
5

STEP 3 (See Diagram 3)
A.) Insert a Bushing (#28) into the hole on the Connecting Rod (#25). Attach the Rod to
the Crank and align the hole. Attach a Spacer (#29) to the Bushing. Then thread the
Left Pedal (#26) through the Rod into the Crank. Secure the Pedal with a ∅1/2”
Nylon Nut (#27).
B.) Repeat the above procedure to install the other side.
DIAGRAM 3
6

STEP 4 (See Diagram 4)
A.) Attach the Seat (#18) to the Seat Post (#19). Secure it with three Flat Washers (#20),
Spring Washers (#21) and M8 Nylon Nuts (#22).
B.) Insert the Seat Post (#19) into the opening on the Main Frame (#1). Select the Seat height
and secure it with a Lock Knob (#17).
C.) Attach the Computer (#23) onto the computer holder on the Main Frame. Plug the
Computer Sensor Wire (#24) into the back of the Computer.
D.) Use the Resistant Adjustment Knob (#32) to adjust the resistance of the Fan Bike.
E.) After completing the assembly of the bike, inspect the bike both visually and functionally.
Make sure there is no loose part and all the nuts and bolts are tightened. Then try the bike
at slow pace to make sure everything is working properly. Do not use the bike and call our
customer service specialist if anything is abnormal.
F.) Carefully review all warnings affixed to the bike and in the manual before using the bike.
DIAGRAM 4
7

8

PARTS LIST
KEY NO. DESCRIPTION QUANTITY
1 Main Frame 1
2 Left Handlebar 1
3 Lower Handlebar 2
4 Axle 1
5 ∅½” Washer 4
6 M6 x 5/8” Allen Bolt 4
7 ∅7/8” Washer 2
8 M8 Nylon Nut 2
9 Axle End Cap 2
10 Rear Stabilizer 1
11 ∅5/8” Washer 3
12 M8 x 5/8” Allen Bolt 3
13 Front Stabilizer 1
14 ∅5/8” Bent Washer 2
15 M8 x 2 ½” Carriage Bolt 2
16 M8 Acorn Nut 2
17 Lock Knob 1
18 Seat 1
19 Seat Post 1
20 Flat Washer 3
21 ∅½” Spring Washer 3
22 M8 Nylon Nut 3
23 Computer 1
24 Computer Sensor Wire 1
25 Connecting Rod 2
26 Left Pedal 1
27 ∅½” Nylon Nut 2
28 Bushing 2
29 Spacer 2
30 Right Pedal 1
31 Right Handler 1
32 Resistant Adjustment Knob 1
33 Resistant Belt 1
# 15 M8 x 2 ½” Carriage Bolt # 12 M8 x 5/8” Allen Bolt #6 M6 x 5/8” Allen Bolt
#7 ∅
∅∅
∅7/8” Washer #11 ∅
∅∅
∅5/8” Washer #20 Flat Washer #14 ∅
∅∅
∅5/8” Bent Washer
#5 ∅
∅∅
∅½” Washer #8 M8 Nylon Nut #27 ∅
∅∅
∅½” Nylon Nut #16 Acorn Nut
#17 Lock Knob
9