Infinity Escape User manual

INFINITY
Escape Massage Chair

INFINITY
Escape Massage Chair
Using different massage techniques like kneading, tapping, pressing, knocking
and shiatsu, the Escape massage chair can provide a very comfortable massage
on neck and back. Enjoy the feeling of a real human hands massaging you into
levels of relaxation you have never felt before!
2. With back scan technology, the Escape can supply a custom massage to
different people with different body height and shape.
Super long L-shaped track gives you an intimate massage from head to
bottom, achieving rapid alleviation of pressure to the spine.
4”
5. The forward sliding function of 4 inches from the wall. The backrest and seat
frame move together and take full advantage of available space.
combine
muscles and providing relaxation.
10. The legrest and foot parts can be adjusted to almost any angle. The
footrest can be extended and contracted approx 6” so almost anyone can
fit in the chair.
11. Ergonomic and beautiful high resolution TFT big screen controller shows
massage parts, methods, and status all at the same time.
Thank you for choosing this INFINITY Escape Massage chair.
Cleaning and Maintenance

Th i s si g n in d ic at es wa rn i ng of ca u s in g pe r so na l i nj ur y.
This sign indicates possibility of damage to the chair. Children should not use this chair.
Do not use this chair when intoxicated.
If you feel ill while using chair, consult a physician as soon
as possible.

Position the chair 4” from the wall to allow for
sufficient space to recline up and down. To make the back able to recline
Check for damage to power cord. Make sure
there is no water on cord or and damage.
Make sure the cord used for the chair and the
outlet both have working earth ground.
Make sure pockets are empty when massaging.
Don’t use bare skin or wear thin clothing, as this
can cause irritation to the skin.
Keep chair away from excess dust and dirt.
Use the chair in places that have good air
circulation only.
Do not use the chair outdoors.
To avoid fading and discoloration
on upholstery and vinyl.
Unplug the chair if you notice any damage to power.
When the fuse is burned out, please turn off the power
switch and unplug the power. Open the lid over the fuse
which is located in the switch box. Replace the fuse with
a good fuse of the same size and specs, then close the
cover and test chair. If you are not able to do this, find
an electrician to replace the fuse.
Gas Pipe: Could cause fire.
Phone wire and lightening rod: Could cause fire or
electric shock.
Water Pipe: Plastics will not provide correct ground.

1 Take out the box which contains the shoulder parts first, then take the main chair body out
of the carton box. To do this, have 2 or more people grasp the left and right metal seat frame
and lift it out slowly. Note: Put the remote controller on the seat surface when taking out the
main chair body to avoid damaging the controller.
2 Take out the head pad, back seat cushion, remote control holder, power cord, left and right
seat airbags, and the left and right shoulder massage devices from the shoulder box, grasping
two sides of the shoulder device and taking them slowly out. Put them on a table or on the
ground. (be careful not to scratch them).
3 Take out the left and right armrest from
the armrest box. Grab two sides of the
armrest and take them slowly from the
box. Note: Armrest is place upside down
inside the box. Put the armrest on a table
or on the ground. Be careful to not scratch
the armrests.
4 Take the legrest device out of the legrest carton box catching the front and
back two sides of the legrest and remove it from the box.

1 Take the right side seat airbag and make sure the zipper is facing the seat. Make the two
cylindrical pins align to the two holes on the seat frame, then press down firmly and make sure
the connection is tight.
2 Connect air pipe on the airbag with air tap behind the seat near the airbag. Make sure it is
connected tightly.
Install the controller holder on the right armrest, then put the remote control into the
controller holder.
Tech Tip:

Don’t use under sunlight or near any
heat source to avoid damaging
the upholstery.
Please use chair on a flat surface to
avoid unexpected noises or damage
to the chair.
1 Clean dust from plug and cord (using
a dry cloth).
2 Check there is no damage to cord
anywhere.
At least 4 inches from the wall.
At least 12 inches from the legrest.
Bind the cables and put them in the seat
to avoid damage when moving.
Do not drop the chair, you may damage
the electronics inside the chair.
Don’t use the castor wheels if the floor is
wooden or easily scratched. You will need
2 or more people to lift the chair in this
case.
Make sure the power is off on the chair
and that the plug unplugged and not
dragging behind the chair.
Please make sure the
massage unit is in the
head area before sitting
on the chair.
To avoid injury caused
by wrong position of
massage unit.
Back scan will not be effective if the
massage unit can’t detect position of
your shoulders and head.
Because the chair is heavy, it can
cause damage to flooring. Please
put a blanket or carpet
piece under the
chair to protect
the floor.

In on status, press it to enter air intensity adjustment which has four levels. Each time
press it, you can adjust the air intensity level and on the screen, you can see the
intensity display.