Infinity IT- 8000 Series User manual

A. Attaching the Armrests
A1. Remove the main body of the massage chair from its packaging.
Locate the two armrests and remove all plastic covering.
A2. Locate the three holes (circled in red in the picture) at the base of the left armrest, attached to
the chair.
---------------------------------------------------------------------------------------------------------------------------------------------
MASSAGE CHAIR ASSEMBLY
USJ-9000
Main body
Armrest
* Although there is a hole, please
disregard the one circled in black.
A3. Look in the carton to locate the three identical screws depicted here:
A4. Fit the three screws mentioned in step A3 into the three holes mentioned in step A2.
(top view) (inverse view)(side view)
IT- 8000 Series Installation Guide

---------------------------------------------------------------------------------------------------------------------------------------------
==
USJ-9000
A5. Locate the three bolts already partially inserted along the top of the left armrest.
A6. Align these three bolts to the three holes on the base of the left armrest.
Tighten these screws, working from the back first, then progressing up to the front.
A7. Align the two air connectors on the bottom of the left armrest to their corresponding slots
on the left side of the chair. Insert, then be sure to push the excess air hose slack
A8. Check to confirm that the armrests are well-assembled. Then rotate the screw 90º
clock-wise.
IT- 8000 Series Installation Guide
down
into the base. This is CRITICAL
to prevent air line kinking and
the chairs proper function.

---------------------------------------------------------------------------------------------------------------------------------------------
B. Assembling the Legrest
B1. Locate the Legrest and remove it from its packing box. Open the Legrest.
==
USJ-9000
A9. Upon completing of assembling the left armrest, repeat the same process to assemble
the right armrest.
B2. Position the Legrest in front of the main body of the massage chair. Insert the
cable first, then insert the air hose into their appropriate slots.
Base of Left Armrest Left Armrest
Legrest
* The air hose should be inserted into
the bottom air hose opening slot shown here.
IT - 8000 Series Installation Guide

---------------------------------------------------------------------------------------------------------------------------------------------
USJ-9000
C. Connecting the Speakers
C1. Locate the speakers and remove them from their packaging.
B3. On the top of each legrest, insert a screw into the hole to fasten that legrest to the body
of the massage chair. Repeat this procedure for the other leg rest.
B4. Place the other parts of the massage chair (seat cushion, back cushion, head cushion,
etc.) onto the main body of the chair. Connect the relevant air hoses securely.
==
IT - 8000 Series Installation Guide

---------------------------------------------------------------------------------------------------------------------------------------------
C2. Locate the connection slots for the speakers, near the top of the backrest, on both
sides.
C3. Locate the wiring extending from each speaker. Connect each speaker into the
corresponding connection slots on the right and left sides of the backrest.
C4. Fasten the speakers securely with the appropriate screws.
USJ-9000
Connect
Connect
RED: Connection for speakers
GREEN: Connection for wire
IT - 8000 Series Installation Guide

---------------------------------------------------------------------------------------------------------------------------------------------
USJ-9000
C5. Fasten a plastic cover onto each speaker.
C6. Assemble the controller and its stand.
C7. Insert the power plug into a power outlet. Turn on the power switch.
==
==
Your massage chair is ready for use.
IT - 8000 Series Installation Guide