Infinity RockerTech Sensation 4D User manual

Sensation 4D
Massage Chair
Seabrook, New Hampshire
Infinite Creative Enterprises, Inc.

A
Shortcut keys
On/Off Pause
Auto
Located on the right side panel
power box
side panel
Tablet controller
A

A
Method 1: Using Casters
Method 2: Lift up by two persons and move the chair
MOVING THE MASSAGE CHAIR
When moving the chair, one person
should tilt the back and the other lift
up the footrest to 45 degrees. Then
push the chair forward via casters.
The back should not be reclined
too low in case of the chair falling
down and causing damage and
harm to property or persons.
Please grasp the bottom of the
side plate (not the base) with
your hands and lift it up.
Due to the heavy weight, the
chair must be carried by two or
more people. Also please be
careful when handling to avoid
back strain.
Attention
Do not drag or push the chair when it is not installed.
Do not hold the plastic parts of the foot cover and power box for moving. Otherwise, it is
easy to cause machine failure or personal injury.
Do not move the chair when someone is seated. Otherwise, it may cause malfunction or
personal injury.
Before moving the machine, please turn off the chair (backrest & footrest will go back to
original position) and unplug the power cord. Otherwise, it may cause malfunction or
personal injury.
It is recommended to lay a cushion on the floor in case of scratching by casters when

CHAIR PLACEMENT
6in
Insert the power cord into the chair’s power socket, then plug the cord into a
grounded wall outlet.
Turn the power switch to the ON (I) position.
ON
OFF
Fuse
开
关
保险丝
Power switchFuse
Power cord
Power socket on the chair
Connecting the power cord
When placing your massage chair, be sure to leave 6 in. of space between the
chair back and wall to allow it to recline safely.
When using the massage chair, ensure there are no people, pets, or objects
within 20 in. of the chair to allow the footrest to extend safely.
Do not use in places with high humidity such as bathrooms or saunas.
Please use on a flat and non-slippery ground.
Do not use in a place with a lot of debris or dust, or a place with high surrounding
temperature (above 40℃).
Do not place the unit under direct sunlight or near high-temperature places such
as heating appliances.
Do not let flames such as cigarettes near the massage chair.
Attention
20in

CONTROLLER PANEL
Power buttonTouch screenHome page
Next pageTouch key
1)The connecting password for Bluetooth is “9999” if there is. The default setting
is without password.
2)The Bluetooth speaker could only connect with one Bluetooth device at a time.
Please turn off your Bluetooth device so others could enjoy it as well.
Note:
Bluetooth & Music Function
Open your mobile device Bluetooth function and pair with the chair Bluetooth
code “BK8000L”, then you could play the music via speakers.

HOW TO USE
Sit in the chair, then press the power button of controller panel and select a massage.
1. Turning On the Massage Chair
First, be sure the power switch on the power box is in the off ”O” position. Then
insert the power cable into the port of socket on the left to the switch. Once firmly
plugged in, proceed to plug the power cord into the outlet. Then flip the switch to
the on“I” position, and the remote should light up.
2. Starting Your Massage
3. Automatic Massage Program Introduction
Operation method:
1) Press the home page [ ] key on controller panel to return the main menu.
2) Press [ ] key to select Auto program menu, then choose the Auto program
to start. The back rollers will detect shoulder position automatically. When you hear
“Beeping”, the detection is finished, at this moment it allows to press up or down
[ ] key to adjust a more accurate shoulder position as you need, then press
[ ] key to start massage.

HOW TO USE
3). Lumbar heating: Press [ ] key to start heating. Press again to close.
4). Foot rollers: Press [ ] to start foot rolling massage. Press again to close
5) 4D function adjustment: Press [ ] or [ ] to adjust the 4D roller strength.
There are total 5 levels adjustments.
Smart massage
program
Keys Name Function
Massage program with kneading, tapping and
full body air pressure massage.
Massage program with kneading, tapping and
full body air pressure massage with quicker
speed.
Massage program with kneading, tapping and
full body air pressure massage with slower
speed.
Slower-paced massage delivers a soothing
intensity with full airbag massage.
Performs a series of grab, hold and stretch
sequences while the back and legrest move
up and down. Helps with muscle recovery
and benefits of stretching
Quick massage
program
Deep Relief
massageprogram
Refreshing massage
program
Stretching massage
program
Automatic course

HOW TO USE
All
Keys Name Description
All massage options.
Specialty program for Office, Phubber,
Driver, Housework, Chess.
Specialty program for Morning,
Afternoon, Night.
Specialty program for Man, Lady, Elderly.
Specialty program for Youth,
Middle-aged, Elderly.
Scenes
Healthcare
Age
Automatic course
More
professional
options
Theme
Massage strength adjustment
In massage status page, press the key [ ] to the massage strength page.

HOW TO USE
Massage angle adjustment
In massage status page, press the key [ ] to the massage angle adjustment page.
Note: Press the key once to start, press again to stop.
Pause or stop the massage
1) Auto off: The massage chair will stop working automatically after 15 minutes.
All auto programs timer is 15 minutes in default setting.
2) Forced stop: Press the key [ ] once, the massage chair will stop working.
Press the key [ ] to re-start massage.
3) End the massage: In the massage status page, press the key [ ] to end the
massage.
*Please wait the legrest to return to its original position before standing up to avoid
damaging the foot parts due to the whole body’s w eight.
After using the massage chair, please turn off the power switch, and pull the
power cord plug out from the power socket.
(Zero gravity button)
In massage angle status page, press the key [ ] to the zero-gravity massage position 1，
and press again to the zero gravity massage position 2，press three times to close.

HOW TO USE
Manual Massage Program
Introduction of manual massage program
Operation method:
1) Press the [ ] home page button to return to main menu.
2) Press the [ ] left or right key and choose “Manual massage”. There are
different massage methods for your selection, including Kneading, Shiatsu, Swedish,
Knocking, Tapping, Rolling.
3) Press “Fixedpoint”, “Partial” or “Fullback to choose different massage area.
4) Press “Width” to adjust the massage roller width.
5) Press “Up” and “Down” key to adjust the massage position
6) In “Additional ” option, there are “Heat therapy”, Bluetooth music functions.
*The manual massage program is a massage program for a partial range of the body.
*The above manual massage programs are all independent programs and cannot be
mixed with other programs.
*The initial setting of all the above massage programs is fixed-point massage. Time
setting is 15 minutes. The default setting for speed and width is medium. You could
adjust as you need.

HOW TO USE
Keys Name Function
Full back massage
Massage in a range around 4 in.
Massage in a fixed point
Adjust the massage roller width
Up or down adjustment
Kneading massage
Knocking massage
Shiatsu massage
Tapping massage
Swedish massage
Rolling massage
Heating on waist
Bluetooth speakers for music
Full back
Partial
Fixed point
Width
Up or Down
Kneading
Knocking
Shiatsu
Tapping
Swedish
Rolling
Heating
Bluetooth
7）Press the key [ ] to air massage option. There are Shoulder, Arm, Leg, Waist,
Thigh and Foot for your selection.

Keys Name Function
HOW TO USE
Shoulder air massage
Waist air massage
Arm air massage
Thigh air massage
Leg/Calves air massage
Foot air massage
Shoulder
Waist
Arm
Thigh
Leg
Foot
8) Press [ ] key to choose “Nature Sound ” option. There are “White noise、
Ocen Surf 、Crickets 、Rain 、Nature 、Air Plane、Car Ride、Fireplace 、Thurderstorm 、
Windy Night”ten music to choose.
*The above manual massage programs are all independent programs and cannot be
mixed with other programs.
*The initial setting of all the above massage programs is fixed-point massage. Time
setting is 15 minutes. The default setting for speed and width is medium. You could
adjust as you need.

HOW TO USE
Settings function
Introduction of settings key function
Operation method:
1) Press [ ] home page key to return main menu
2) Press [ ] key to choose “settings” option. There are Language, Backlight,
Touch-tone, Sleep time, and etc.
Engineering modeEngineering mode
Language
Backlight
Touch-tone
Voice Demo
Massage time
Keys Name Function
Choose different language
Adjust the backlight brightness
Touch-tone On/Off button
Voice Demo On/Off button
Massage time setting including
5/10/15/…30 minutes
17
Volume Adjust the volume

18

Sensation 4D
19
120V~ 60Hz