Infinity Aura User manual

Power Cord
Aura
Massage Chair
Quick Start
Guide
User Manual AURA
MASSAGE CHAIR
Aura
Massage Chair
Assembly
Guide
Warranty
Card
72 Stard Road, Seabrook, NH 03874
[phone]
www.infinitymassagechairs.com
Step 2:
Open the box and remove packaging materials.
2
3Step 3:
Remove protective covering from the chair.
Aura
Massage Chair
Assembly
Guide
1Step 1:
Carefully check box contents to the detail
below, making sure all contents are
accounted for.
If anything is missing, please contact INFINITY at
603-910-5000. Do not return to the place of purchase.
Box 1:
Chair Body & Power
Cord
www.infinitymassagechairs.com/assembly-
tutorials to watch an assembly video.
Or Scan Code
Chair Body
Version 1.1
Top of box
Lift
upwards
Packaging materials Protective covering

Review chair for smooth operation. If things are not operating correctly,
review all assembly steps. Call Infinity support at 1-603-910-5000 if you
need live US-based support.
You are done; time for a Massage!
Power on the
remote and select
a program to
start a session.
Go to www.infinitymassagechairs.com/warranty to register your chair
and enable full support for your warranty.
Step 4:
With a partner, lift the chair out of the box.
4Step 5:
Remove the protective covering from the footrest, and the velcro
protector from the flap, then lower the footrest into its resting position.
Remove the plastic guards.
5
Step 6:
To properly install the seat cushion, remove and discard the 3
protective covers from the velcro on the underside of the seat
cushion.
6
8Step 8:
Your remote control should come already attached to the chair
body. Remove the plastic wrapping from the remote control and
place it in the remote holder located on the right arm of the chair.
7Step 7:
Place the velcro from the flap on top of the footrest onto the velcro strip
on the chair body, then place the seat cushion down, lining up the velcro
on the chair body with the seat cushion.
Step 9:
Connect the chairs power cord to a grounded 110V electrical outlet
and plug it into the respective port on the back side of the base of
the chair. Flip the main power switch on.
9
Main power
switch
Power cord
port
Final Check:
Footrest velcro
strip
Seat cushion
velcro strip
Protective coverings
Footrest