Infinity Riage-X3 User manual

Infinity Riage -X3 Massage
Chair Installation Guide
For best results, please follow these instructions in order.
HOLD THE ARMREST NEAR THE CHAIR ON THE CORRECT SIDE AND INSTALL THE 3 NUMBERED
AIR HOSES TO THE MATCHING NUMBERED NOZZLE ON THE ARMREST:
A: ATTACHING THE ARMRESTS.

NOW ATTACH THE ARMREST SOCKET TO THE CHAIR BACK PIN AND ALIGN FRONT OF ARMREST ONTO CHAIR BODY:
NOW ATTACH ONE BOLT AND WASHER IN THE AREA SHOW BELOW USING THE SUPPLIED WRENCH:
REPEAT PROCEDURE FOR THE OTHER SIDE OF THE CHAIR.

B: ATTACHING THE THIGH AIRBAGS.
REMOVE THE HOOK AND LOOP PROTECTIVE COVERING AND ATTACH THE THIGH AIRBAGS TO THE ARMREST.

C: INSTALLING THE LEGREST.
FIRST MOVE THE LEGREST TO THE FRONT OF THE CHAIR AND LOCATE THE AIR AND POWER LOCATIONS ON THE CHAIR
AND LEGREST:

NOW PLUG IN THE POWER CONNECTOR TILL IT CLICKS IN PLACE,AND PLUG IN THE AIR HOSE FIRMLY ONTO THE AIR
NOZZLE ON THE CHAIR.
NOW THAT POWER AND AIR ARE CONNECTED,ATTACH THE LEFT LEGREST HINGE ONTO THE BODY PIN AS SHOW:

ATTACH A LEGREST CLIP TO THE END OF THE CHAIR BODY PIN TO HOLD THE LEGREST IN PLACE:
REPEAT ON THE OTHER SIDE OF THE CHAIR:

NOW ZIP THE LEGREST HINGE COVER TO THE BODY OF THE CHAIR AS SHOWN:
AFTER PLUGGING IN POWER CORD AND REMOTE CONTROL CORD TO THE BACK OF THE CHAIR YOUR INFINITY RIAGE
IS READY FOR USE!ENJOY!