Insignia NS-HWD1636 User manual

ENGLISH............................................................................3
ESPAÑOL........................................................................ 21
Before using your new product, please read these instructions to prevent any damage.
Antes de usar su producto nuevo, lea estas instrucciones para prevenir cualquier daño.
USER GUIDE | GUÍA DEL USUARIO
36” Espresso Finish Open Frame TV
Stand
Base para televisor con armazón
abierto de 36 pulg. con acabado
expreso
NS-HWD1636

2
36
”
E
spresso
Fi
n
i
s
h
O
pen
F
rame
TV
S
tan
d
www.insigniaproducts.com
CONTENTS
ENGLISH........................................................................................3
SAFETY INFORMATION AND SPECIFICATIONS....................................................... 3
PACKAGE CONTENTS: PARTS........................................................................................ 4
PACKAGE CONTENTS: HARDWARE............................................................................. 5
ASSEMBLY INSTRUCTIONS............................................................................................ 6
CARE AND MAINTENANCE..........................................................................................18
ONE-YEAR LIMITED WARRANTY................................................................................19
ESPAÑOL.................................................................................... 21
INFORMACIÓN DE SEGURIDAD Y ESPECIFICACIONES......................................21
CONTENIDO DEL PAQUETE: PIEZAS.........................................................................22
CONTENIDO DEL PAQUETE: FERRETERÍA...............................................................23
INSTRUCCIONES DE MONTAJE ..................................................................................24
CUIDADO Y MANTENIMIENTO...................................................................................36
GARANTÍA LIMITADA DE UN AÑO............................................................................37

3
36
”
E
spresso
Fi
n
i
s
h
O
pen
F
rame
TV
S
tan
d
www.insigniaproducts.com
ENGLISH
SAFETY INFORMATION AND SPECIFICATIONS
CAUTION: Thetop surface of this stand
is designed for use with a product
weighing no more than
50 lbs. (22.68 kg) and having a width
that permits it to sit evenly on the
stand with no more than a one-inch overhang on
each side of the shelf. Use with products that weigh
more than the maximum weight allowed, or with
dimensions that extend beyond the maximum
width may result in instability, which may result in
injury.
CAUTION: This product contains small
items that could be a choking hazard if
swallowed.
Keep these items away from young
children!
Model #: NS-HWD1636
Maximum Supported Weights:
- Top shelf: 50 lbs. (22.68 kg)
- Middle shelf: 20 lbs. (9 kg)
- Bottom shelf: 30 lbs. (13.6 kg)
Maximum screen size: 40” diagonal
Overall dimensions (H × W × D):
22.0 x 35.4 x 15.7 in.
(55.8 x 89.8 x 40.0 cm)
Overall weight: 40 Lbs. (18.14 kg)
35.4 inch
(89.8 cm)
22.0 inch
(55.8 cm)
15.7 inch
(40.0 cm)
50 lbs.
20 lbs.
30 lbs.
Tools needed:
Phillips screwdriver
Hammer

4
36
”
E
spresso
Fi
n
i
s
h
O
pen
F
rame
TV
S
tan
d
www.insigniaproducts.com
PACKAGE CONTENTS: PARTS
Make sure that you have all the parts necessary to assemble your new TV stand. While not all parts are
labeled, some of the parts will have a label or an inked letter on the edge to help distinguish similar parts
from each other. Use this part identification to help identify similar parts.
Label Part Qty Label Part Qty
A Top 1 G Stop Molding 1
B Shelf 2 H Upper Long Skirt 2
C Right Front Leg 1 I Lower Long Skirt 1
D Left Front Leg 1 J Upper Short Skirt 2
E Right Rear Leg 1 K Lower Short Skirt 2
FLeftRearLeg 1

5
36
”
E
spresso
Fi
n
i
s
h
O
pen
F
rame
TV
S
tan
d
www.insigniaproducts.com
PACKAGE CONTENTS: HARDWARE
Note: The table below shows the required hardware. You may receive extra hardware.
Make sure that you have all the hardware necessary to assemble your new TV stand.
Label Hardware Qty.
5F 8
1F 10
8F 10
4G 7
15F 6
20P 10
Hidden
connector
Hidden cam
Cam screw
Metal bracket
Wood dowel
Screw cover
Label Hardware Qty.
1L 1
2S 10
9S 8
1S 14
8S 8
Warning label
Black 1-7/8” flat head screw
Black 1-1/8” pan head screw
Black 9/16” large head screw
Connector screw
10 20 30 40 50 60 70 80 90 100mm
1234in

6
36
”
E
spresso
Fi
n
i
s
h
O
pen
F
rame
TV
S
tan
d
www.insigniaproducts.com
ASSEMBLY INSTRUCTIONS
Step 1: Preparing the upper skirts
Caution: Assemble your stand on a carpeted floor or on the empty carton to avoid scratching your stand.
• Insert a connector screw (8S) into each hidden connector (5F), then use a hammer to tap a hidden connector and
screw assembly into the large holes in the upper long skirts (H) and upper short skirts (J).
Note: Make sure that the threads in the connector screws (8S) are pointing straight out, away from the wood part.
8S
5F
5F
You’ll need:
5F (8)
8S (8)
Hammer

7
36
”
E
spresso
Fi
n
i
s
h
O
pen
F
rame
TV
S
tan
d
www.insigniaproducts.com
Step 2 : Preparing the top, shelves, and lower short skirts
• Push ten hidden cams (1F) into the top (A), shelves (B), and lower short skirts (K). The arrow on the
hidden cams must point toward the hole in the edge of the part.
1F
Arrow
Arrow
The arrow in the hidden cam
must point toward the hole in
the edge of the board
Hole
You’ll need:
1F (10)

8
36
”
E
spresso
Fi
n
i
s
h
O
pen
F
rame
TV
S
tan
d
www.insigniaproducts.com
Step 3 : Preparing the stop molding
• Screw ten cam screws (8F) into the predrilled holes in the front legs (Cand D) and stop molding (G),
then tighten with a phillips screw driver until the raised collar of the cam screw (8F) is flush with the
surface of the part.
8F
Collar
You’ll need:
Phillips screwdriver 8F (10)

9
36
”
E
spresso
Fi
n
i
s
h
O
pen
F
rame
TV
S
tan
d
www.insigniaproducts.com
Step 4 : Attaching the stop molding to the top
1Insert two wooden dowels (15F) into the holes in the edge of the stop molding (G).
2Insert the cam screw and dowel end of the stop molding (G) into the holes on the top (A).
Note: Make sure that the wooden dowels in the stop molding insert into the holes in the top, and that the dowel end
of the fastener remains fully inserted in the hole of the adjoining part while locking the fastener.
3Tighten each hidden cam with a Phillips screwdriver as tight as possible.
4Insert four wooden dowels (15F) into the holes shown in the surfaces of the top (A) and stop molding (G).
15F
15F
15F
15F
Surfacewithholes
Surfacewithhiddencams
You’ll need:
Phillips screwdriver 15F (6)

10
36
”
E
spresso
Fi
n
i
s
h
O
pen
F
rame
TV
S
tan
d
www.insigniaproducts.com
Step 5: Attaching the upper long skirts to the top
• Attach the upper long skirts (H) to the top (A) and stop molding (G), then tighten the four hidden connectors.
Surfacewithout
hiddenconnectors
To fasten two parts together using the hidden
connectors, insert your screwdriver at an angle
into the slot in the hidden connector. While
pushing the screw into the hole of the
adjoining part, turn the screwdriver clockwise
to tighten. Do not overtighten.
Surfacewith
hiddenconnectors
You’ll need:
Phillips screwdriver