Insignia NS-HWD1848 User manual

Before using your new product, please read these instructions to prevent any damage.
USERGUIDE
TV Stand with
Gaming Nook
NS-HWD1848

Contents
Package contents 3
Safety information 6
Specifications 8
Assembling your TV stand 9
Installing anti-tip hardware 24
Care and maintenance 25
One-Year Limited Warranty 26
www.insigniaproducts.com
2

Package contents
Parts
(A) Base (B) Supports (2) (C and D) Divider panels
(E and F) Sides
(G) Top (H) Front edge
(I)Small back panel (J) Large shelf
(K)Large back panel
(L)Small shelves (2) (M) Small divider (N) Door
www.insigniaproducts.com
3
TV Stand with Gaming Nook

Hardware
Label Hardware Quantity
AA Shelf supports 8
BB Cam screws 30
CC Cam locks 30
DD 3 × 15 mm screws 36
EE 4 × 50 mm screws 5
FF 8 × 30 mm wood dowels 41
GG Handle (with screws) 2
HH Right pin hinge 1
II Left pin hinge 1
JJ A3 × 15 mm screws 2
KK Magnetic catch 1
www.insigniaproducts.com
4
NS-HWD1848

Label Hardware Quantity
LL Anti-tip bracket with plastic
strap 2
MM Cable wraps 2
NN A4 × 13 mm screw 4
OO Touch up pen 1
Tools Needed
Phillips screwdriver
www.insigniaproducts.com
5
TV Stand with Gaming Nook

Safety information
CAUTION: This product contains small items that could be a choking hazard if
swallowed. Keep these items away from young children.
CAUTION: This stand is intended only for use with a TV not weighing more than
60 lbs. (27.2 kg) and not more than 55" wide if sitting on the top shelf. Refer to
instructions for details. Using with other products including products that weigh
more than the maximum weight allowed, may result in instability, which may
cause possible injury.
Model #: NS-HWD1848
Distributed by Best Buy Purchasing, LLC
Manufacturer: Bell'O
This TV Stand is intended for a TV NO WIDER than 55". TV should be centered
and should not hang more than one-inch over either edge.
www.insigniaproducts.com
6
NS-HWD1848

WARNING
Please use your stand correctly and safely. Improper use can cause safety hazards or damage
to your furniture or household items. Carefully read the following chart.
Look out for: What can happen: How to avoid the problem:
lChildren
climbing on the
stand.
lChildren playing
and being active
near the TV.
lRisk of injury or
death.
lA child playing with a
TV can cause it to tip
over.
lNever allow children to climb on or play with
the stand.
lDo not place toys or food on the top
shelves. Children may try to climb to reach
them out of curiosity.
lImproper use of
the stand to
support TVs.
lTVs that are
above the
maximum
specified weight
and/or size.
lRisk of injury or
death.
lTVs can be very
heavy.
Note: older
CRTTVs tend to be
unbalanced and
prone to tipping
forward.
lATV must only be set on furniture
specifically designed to support a television.
lNever use a TV that exceeds the weight
ratings or size guidelines specified for the
stand.
lOverloaded
shelves.
lRisk of injury.
lTop-heavy furniture
can tip over.
lOverloaded shelves
can break.
lNever exceed the weight limits shown in the
instructions.
lWork from the bottom to the top when
loading shelves.
lThe side shelves support up to 15 lbs. (6.8
kg) each. The large shelf supports up to 45
lbs. (20.4 kg). The top supports up to 60 lbs.
(27.2 kg).
lImproperly
moving the
stand.
lThe stand can tip
over or break if
improperly moved.
lRisk of injury.
lUnload shelves from the top to the bottom
before moving the stand.
lDo not push the stand, especially on a
carpeted floor. Have a friend help you lift
the item and set it in place.
lDo not lift the stand using the top shelf. Lift
from the frame or leg assembly.
lRemove the TV before moving the TV
stand.
www.insigniaproducts.com
7
TV Stand with Gaming Nook

Specifications
Dimensions (H × W × D) 26.0 × 47.5 × 15.5 in. (66 × 120.7 × 39.4 cm)
Weight 72.6 lbs. (33 kg)
Maximum weight capacity 60 lbs. (27.2 kg)
Maximum shelf capacity
Top:60 lbs. (27.2 kg)
Large shelf:45 lbs. (20.4 kg)
Side shelves:15 lbs. (6.8 kg)
Maximum screen size 55" diagonal
www.insigniaproducts.com
8
NS-HWD1848

Assembling your TV stand
Step 1: Setting up the base
AInsert six wooden dowels (FF)into the base (A), then screw six cam screws
(BB) into smaller holes with a Phillips screwdriver.
BAlign the supports (B) with the wooden dowels and the cam screws on the
base. The cam lock holes on the sides of the supports should face the front
edge of the base. Insert six cam locks (CC) into the cam lock holes, then use
a Phillips screwdriver to secure.
You’ll need:
FF (6) BB (6) CC (6) Phillips
screwdriver
www.insigniaproducts.com
9
TV Stand with Gaming Nook

Step 2: Installing the divider panels
AInsert two wooden dowels (FF)into the edge of the each divider panel (C
and D).
BAlign the divider panels' dowels with the holes in the base. The holes on the
faces of the divider panels should face outward and the holes on the edges
should face down (towards the back). Insert four screws (EE)through the
bottom of the base and into the divider panels, then tighten with a Phillips
screwdriver.
You’ll need:
FF (4) EE (4)
Phillips screwdriver
www.insigniaproducts.com
10
NS-HWD1848

Step 3: Setting up the large shelf
AAttach the magnetic catch (KK) to the large shelf (J) with two screws (JJ)and
a Phillips screwdriver. The magnet should point out towards the edge of the
shelf.
BInsert four cam screws (BB)into the large shelf with a Phillips screwdriver.
You’ll need:
KK JJ (2) BB (4) Phillips
screwdriver
www.insigniaproducts.com
11
TV Stand with Gaming Nook

Step 4: Attaching the top shelf
AInsert four wooden dowels (FF) into the inside holes on the edges of the
divider panels.
BAlign the wooden dowels on the divider panels with the holes on the large
shelf. Insert four cam locks (CC), then use a Phillips screwdriver to secure.
You’ll need:
FF (4) CC (4) Phillips screwdriver
www.insigniaproducts.com
12
NS-HWD1848

Step 5: Attaching the sides
AInsert 14 wooden dowels (FF) around the edges of the stand assembly. Do
not insert dowels into the cam screw holes.
BScrew 12 cam screws (BB) into the sides (E and F) with a Phillips
screwdriver.
www.insigniaproducts.com
13
TV Stand with Gaming Nook

CAlign the wooden dowels and cam screws on the sides and push them on.
You’ll need:
FF (14) BB (12) Phillips screwdriver
www.insigniaproducts.com
14
NS-HWD1848

Step 6: Attaching the front edge
AInsert a wooden dowel (FF) on each side of the front edge (H).
BInsert the front edge into the holes on the corners of the sides. Make sure
that the holes on the narrow side face up.
CInsert 12 cam locks (CC) into the stand assembly, then secure them with a
Phillips screwdriver.
DLift the stand upright.
www.insigniaproducts.com
15
TV Stand with Gaming Nook

ESlide the swivel brackets until they align with the screw holes on the sides,
then secure with two screws (DD)and a Phillips screwdriver.
You’ll need:
FF (2) CC (12) DD (2) Phillips
screwdriver
www.insigniaproducts.com
16
NS-HWD1848

Step 7: Attaching the small divider
AInsert two wooden dowels (FF) into the top of the large shelf.
BAlign the small divider (M)with the wooden dowels.
CInsert a screw (EE) through the bottom of the large shelf and into the divider
panel, then secure with a Phillips screwdriver.
You’ll need:
FF (2) EE (1)
www.insigniaproducts.com
17
TV Stand with Gaming Nook

Step 8: Attaching the top
AInsert nine wooden dowels (FF) into the top edges of the shelf assembly.
BUse a Phillips screwdriver to insert eight cam screws (BB)into the top (G).
www.insigniaproducts.com
18
NS-HWD1848

CAlign the wooden dowels (FF)and cam screws (BB)on the top (G) with the
stand assembly. Insert eight cam locks (CC), then use a Phillips screwdriver
to secure.
You’ll need:
FF (9) BB (8) CC (8)
www.insigniaproducts.com
19
TV Stand with Gaming Nook

Step 9: Attaching the back
AAlign the screw holes on the small back panel (I) with the holes on the
upper half of the stand assembly, then secure with 16 screws (DD)and a
Phillips screwdriver.
BAlign the screw holes on the large back panel (K) with the holes on the
lower half of the stand assembly, then secure with 16 screws (DD)and a
Phillips screwdriver.
Note
Leave two holes open to attach the cable wrap. See step 9C (below).
www.insigniaproducts.com
20
NS-HWD1848