Intel D815EEA2 User manual

Intel®Desktop Boards D815EEA2, D815EPEA2,
D815EFV, and D815EPFV
Universal Platforms for 370-pin Processors
Quick Reference
This guide is written for technically qualified personnel with experience installing and
configuring desktop boards.
#FGPSF:PV#FHJO
Warnings and Cautions............................................................................ 3
Safety and Regulatory Requirements....................................................... 3
4VQQPSUFE$PNQPOFOUT
Processors................................................................................................ 4
Memory Modules..................................................................................... 4
Processor and Memory Module Combinations........................................ 5
%FTLUPQ#PBSE$PNQPOFOUTGPS%&&"BOE%&1&" ..........6 
%FTLUPQ#PBSE$PNQPOFOUTGPS%&'7BOE%&1'7 ................8 
*OTUBMMBUJPO4UFQT
1 Installing Memory Modules............................................................. 10
2 Installing the AGP Card Retention Mechanism............................... 11
3 Installing the I/O Shield................................................................... 13
4 Installing the Desktop Board ........................................................... 14
5 Installing the Processor.................................................................... 15
6 Connecting the Fans ........................................................................ 15
7 Installing AGP and GPA Cards ....................................................... 16
8 Connecting the IDE Drives.............................................................. 16
6TJOHUIF#*04$POGJHVSBUJPO+VNQFS ..................................................18 
#*044FUVQ1SPHSBN%FGBVMUT .................................................................19 
*UFNTPOUIF$%30.
x Product warranty
x Intel®Express Installer
x Intel®Desktop Boards D815EEA2, D815EPEA2, D815EFV, and
D815EPFV Product Guide
x Software utilities and drivers
x Software license agreement
x Readme file
Part number: A52561-002

 *OUFM%FTLUPQ#PBSET%&&"%&1&"%&'7
BOE%&1'72VJDL3FGFSFODF
(FUUJOH)FMQ
View or download product support information from Intel’s World Wide
Web site:
http://support.intel.com/support/motherboards/desktop/
Documents on the Web site include:
x Intel®Desktop Board D815EEA2/D815EPEA2 Technical Product
Specification
x Intel®Desktop Board D815EFV/D815EPFV Technical Product
Specification
x Intel®Desktop Board D815EEA2/D815EPEA2 Specification Update
x Intel®Desktop Board D815EFV/D815EPFV Specification Update
If you can’t find the information you need on the Web, contact your point of
purchase. The Intel Web site also includes telephone numbers and billing
charges, if applicable, for Intel customer support.
Information in this document is provided in connection with Intel®products. No
license, express or implied, by estoppel or otherwise, to any intellectual property
rights is granted by this document. Except as provided in Intel’s Terms and
Conditions of Sale for such products, Intel assumes no liability whatsoever, and
Intel disclaims any express or implied warranty, relating to sale and/or use of Intel
products including liability or warranties relating to fitness for a particular purpose,
merchantability, or infringement of any patent, copyright or other intellectual
property right. Intel products are not intended for use in medical, life saving, or life
sustaining applications. Intel may make changes to specifications and product
descriptions at any time, without notice.
The D815EEA2, D815EPEA2, D815EFV, and D815EPFV desktop boards may
contain design defects or errors known as errata which may cause the product to
deviate from published specifications. Current characterized errata are available
on request.
Contact your local Intel sales office or your distributor to obtain the latest
specifications and before placing your product order.
Copies of documents which have an ordering number and are referenced in this
document, or other Intel literature, may be obtained from Intel Corporation by
going to the World Wide Web site at: http://www.intel.com or by calling
1-800-548-4725.
†Third-party brands and names are the property of their respective owners.
Copyright © 2001, Intel Corporation

*OUFM%FTLUPQ#PBSET%&&"%&1&"%&'7 
BOE%&1'72VJDL3FGFSFODF 
#FGPSF:PV#FHJO
8BSOJOHTBOE$BVUJPOT
 8"3/*/(
%JTDPOOFDUUIFEFTLUPQCPBSEhTQPXFSTVQQMZGSPNJUTBDQPXFS
TPVSDFCFGPSFZPVDPOOFDUPSEJTDPOOFDUDBCMFTPSJOTUBMMPSSFNPWF
BOZEFTLUPQCPBSEDPNQPOFOUT'BJMVSFUPEPUIJTDBOSFTVMUJO
QFSTPOBMJOKVSZPSFRVJQNFOUEBNBHF4PNFDJSDVJUSZPOUIF
EFTLUPQCPBSEDBODPOUJOVFUPPQFSBUFFWFOUIPVHIUIFGSPOUQBOFM
QPXFSTXJUDIJTPGG
 $"65*0/
&MFDUSPTUBUJD%JTDIBSHF&4%DBOEBNBHFEFTLUPQCPBSEDPNQPOFOUT
*OTUBMMUIFEFTLUPQCPBSEBUBO&4%DPOUSPMMFEXPSLTUBUJPO*GTVDIB
XPSLTUBUJPOJTOPUBWBJMBCMFXFBSBOBOUJTUBUJDXSJTUTUSBQ
4BGFUZBOE3FHVMBUPSZ3FRVJSFNFOUT
See the Intel®Desktop Boards D815EEA2, D815EPEA2, D815EFV, and
D815EPFV Product Guide for all applicable regulatory compliance statements,
product certification markings, and safety and electromagnetic compatibility
(EMC) standards and regulations these desktop boards are compliant with.
Replacement battery warning label provided: Place the label inside the chassis
in an easy-to-see location near the battery but not on the board itself.
Intended uses: This product was evaluated as information technology
equipment (I.T.E.) for home or office use when installed in an appropriate
computer chassis. Other end uses or locations may require further evaluation.

 *OUFM%FTLUPQ#PBSET%&&"%&1&"%&'7
BOE%&1'72VJDL3FGFSFODF
4VQQPSUFE$PNQPOFOUT
1SPDFTTPST
The Intel Desktop Boards D815EEA2, D815EPEA2, D815EFV, and
D815EPFV support the following processors:

1SPDFTTPS
5ZQF

4PDLFU
5ZQF
1SPDFTTPS
'SFRVFODZ
()[
1SPDFTTPS
'SFRVFODZ
.)[
4ZTUFN#VT
'SFRVFODZ
.)[
-$BDIF
4J[F
,#
FC-PGA
1.0 933, 866,
800EB,
733, 667,
600EB, and
533EB
133 256
Intel®
Pentium®III
processors
N/A 850, 800,
750, 700,
650, 600E,
550E, and
500E
100 256
FC-PGA N/A 800 100 128Intel®
Celeron™
processors N/A 766, 733,
700, 667,
633, 600,
566, and
533A
66 128
For the latest information on processors supported by the boards, refer to the
Intel Web site at:
http://support.intel.com/support/motherboards/desktop/
.FNPSZ.PEVMFT
The three memory sockets on the boards support SDRAM DIMMs that meet the
following requirements:
x 3.3 V, 168-pin modules with gold-plated contacts
x PC100 or PC133 SDRAM
x 64 Mbit and 128 Mbit SDRAM component density
x Minimum system memory: 32 MB (based on 64 Mbit SDRAM component
density)
x Maximum system memory: 512 MB (based on 128 Mbit SDRAM
component density)
x Unbuffered single- or double-sided DIMMs
x Non-ECC DIMMs (ECC DIMMs may be used, however, they will operate
in non-ECC mode only)
x Suspend to RAM (STR) support
x Memory with Serial Presence Detect (SPD)
x Basic non-SPD support at 100 MHz only

*OUFM%FTLUPQ#PBSET%&&"%&1&"%&'7 
BOE%&1'72VJDL3FGFSFODF 
1SPDFTTPSBOE.FNPSZ.PEVMF$PNCJOBUJPOT
The D815EEA2, D815EPEA2, D815EFV, and D815EPFV boards support the
processor and memory module combinations shown below.
1SPDFTTPS5ZQF
4ZTUFN#VT'SFRVFODZ 1$.FNPSZ .PEVMFTy 1$.FNPSZ .PEVMFTy
Intel Celeron processor
(66 MHz) …will operate at 100 MHz …will operate at 100 MHz
Intel Celeron processor
(100 MHz) …will operate at 100 MHz …will operate at 100 MHz
Intel Pentium III processor
(100 MHz) …will operate at 100 MHz …will operate at 100 MHz
Intel Pentium III processor
(133 MHz) …will operate at 100 MHz …will operate at 133 MHz
(see note below)
✏
/05&4
'PS.)[PQFSBUJPOPOMZGPVSTJEFTPGNFNPSZDBOCFVTFEUXP
EPVCMFTJEFE%*..TPSPOFEPVCMFTJEFE%*..BOEUXPTJOHMFTJEFE
%*..T*GNPSFUIBOGPVSTJEFTBSFVTFEUIFNFNPSZXJMMPOMZSVOBU
.)[
"MMNFNPSZDPNQPOFOUTBOE%*..TVTFEXJUIUIFEFTLUPQCPBSETNVTU
DPNQMZXJUIUIF1$4%3".TQFDJGJDBUJPOT5IFTFJODMVEFUIF1$
4%3".4QFDJGJDBUJPONFNPSZDPNQPOFOUTQFDJGJDUIF1$6OCVGGFSFE
%*..4QFDJGJDBUJPOBOEUIF1$3FHJTUFSFE%*..4QFDJGJDBUJPO5PWJFX
PSEPXOMPBEUIFTFTQFDJGJDBUJPOTSFGFSUPUIJT*OUFM8FCTJUF
http://www.intel.com/technology/memory/pcsdram/
'PSJOGPSNBUJPOBCPVUWFOEPSTUIBUTVQQPSUUIFTFNFNPSZSFRVJSFNFOUT
SFGFSUPUIF%&&"%&1&"%&'7PS%&1'7MJOLPO
UIJT*OUFM8FCTJUF
http://support.intel.com/support/motherboards/desktop/

 *OUFM%FTLUPQ#PBSET%&&"%&1&"%&'7
BOE%&1'72VJDL3FGFSFODF
%FTLUPQ#PBSE$PNQPOFOUTGPS%&&"
BOE%&1&"
OM11622
USB
Devices USB Devices
On
Ground
Reset
HD LED
Power LED
J9H3
2
1
15
16
+5V No
Connection
J9H2
1
3
2-pin alternate
power LED/Sleep
connector
FA C D
J
H
I
G
RWT
U S O MN
B
BB
Y
AA
Z
E
K
L
P
X
Line
In
VQ

*OUFM%FTLUPQ#PBSET%&&"%&1&"%&'7 
BOE%&1'72VJDL3FGFSFODF 
%&&"BOE%&1&"%FTLUPQ#PBSE$PNQPOFOUT
A. Communication and Networking Riser (CNR) connector (optional)
B. ADI AD1885 audio codec
C. AGP universal connector
D. ATAPI-style auxiliary line in connector
E. Front panel audio connector (optional)
F. ATAPI-style CD-ROM connector
G. Processor fan connector (fan 1)
H. Digital video output (DVO) connector (D815EEA2 only)
I. Controller hub:
x Intel®82815E GMCH (D815EEA2 only)
x Intel 82815EP MCH (D815EPEA2 only)
J. Processor socket
K. DIMM sockets
L. Chassis fan connector (fan 3)
M. Speaker
N. Power connector
O. Diskette drive connector
P. Primary IDE connector
Q. Secondary IDE connector
R. Intel®82801BA (ICH2)
S. SMSC LPC47M132 super I/O controller
(optional SMSC LPC47M142 super I/O controller)
T. Serial port B connector
U. SCSI hard drive activity LED connector
V. Chassis intrusion connector
W. Chassis fan connector (fan 2)
X. BIOS configuration jumper block
Y. Battery
Z. Wake on LAN†technology connector (optional)
AA. Front panel USB connector (optional)
BB. PCI expansion slots
 $"65*0/
.BOZPGUIFJOUFSOBMEFTLUPQCPBSEDPOOFDUPSTQSPWJEFPQFSBUJOHWPMUBHF
7%$BOE7%$GPSFYBNQMFUPEFWJDFTJOTJEFUIFDPNQVUFS
DIBTTJTTVDIBTGBOTBOEJOUFSOBMQFSJQIFSBMT5IFTFDPOOFDUPSTBSFOPU
PWFSDVSSFOUQSPUFDUFE%POPUVTFUIFTFDPOOFDUPSTGPSQPXFSJOHEFWJDFT
FYUFSOBMUPUIFDPNQVUFSDIBTTJT"GBVMUJOUIFMPBEQSFTFOUFECZUIF
FYUFSOBMEFWJDFTDPVMEDBVTFEBNBHFUPUIFDPNQVUFSUIF
JOUFSDPOOFDUJOHDBCMFTBOEUIFFYUFSOBMEFWJDFTUIFNTFMWFT

 *OUFM%FTLUPQ#PBSET%&&"%&1&"%&'7
BOE%&1'72VJDL3FGFSFODF
%FTLUPQ#PBSE$PNQPOFOUTGPS%&'7BOE
%&1'7
OM11623
USB
Devices USB Devices
Line
In
FC D
J
H
I
G
SRQU
V T P MN
BA
BB
AA
Z
E
K
L
Y
X
On
Ground
Reset
HD LED
Power LED
J9H3
2
1
15
16
+5V No
Connection
J9H2
1
3
2-pin alternate
power LED/Sleep
connector
WO

*OUFM%FTLUPQ#PBSET%&&"%&1&"%&'7 
BOE%&1'72VJDL3FGFSFODF 
%&'7BOE%&1'7%FTLUPQ#PBSE$PNQPOFOUT
A. Communication and Networking Riser (CNR) connector (optional)
B. ADI AD1885 audio codec
C. AGP universal connector
D. ATAPI-style auxiliary line in connector
E. Front panel audio connector (optional)
F. ATAPI-style CD-ROM connector
G. Processor fan connector (fan 1)
H. Digital video output (DVO) connector (D815EFV only)
I. Controller hub:
x Intel 82815E GMCH (D815EFV only)
x Intel 82815EP MCH (D815EPFV only)
J. Processor socket
K. DIMM sockets
L. Battery
M. Speaker
N. Power connector
O. Chassis fan connector (fan 3)
P. Diskette drive connector
Q. Primary IDE connector
R. Secondary IDE connector
S. Intel 82801BA (ICH2)
T. SMSC LPC47M132 super I/O controller
(optional SMSC LPC47M142 super I/O controller)
U. Serial port B connector
V. SCSI LED connector
W. Chassis intrusion connector
X. Chassis fan connector (fan 2)
Y. BIOS configuration jumper block
Z. Wake on LAN technology connector (optional)
AA. Front panel USB connector (optional)
BB. PCI expansion slots
 $"65*0/
.BOZPGUIFJOUFSOBMEFTLUPQCPBSEDPOOFDUPSTQSPWJEFPQFSBUJOHWPMUBHF
7%$BOE7%$GPSFYBNQMFUPEFWJDFTJOTJEFUIFDPNQVUFS
DIBTTJTTVDIBTGBOTBOEJOUFSOBMQFSJQIFSBMT5IFTFDPOOFDUPSTBSFOPU
PWFSDVSSFOUQSPUFDUFE%POPUVTFUIFTFDPOOFDUPSTGPSQPXFSJOHEFWJDFT
FYUFSOBMUPUIFDPNQVUFSDIBTTJT"GBVMUJOUIFMPBEQSFTFOUFECZUIF
FYUFSOBMEFWJDFTDPVMEDBVTFEBNBHFUPUIFDPNQVUFSUIF
JOUFSDPOOFDUJOHDBCMFTBOEUIFFYUFSOBMEFWJDFTUIFNTFMWFT

 *OUFM%FTLUPQ#PBSET%&&"%&1&"%&'7
BOE%&1'72VJDL3FGFSFODF
*OTUBMMBUJPO4UFQT
 *OTUBMMJOH.FNPSZ.PEVMFT
 $"65*0/
*OTUBMMNFNPSZJOUIF%*..TPDLFUTQSJPSUPJOTUBMMJOHUIF"(1WJEFPDBSE
UPBWPJEJOUFSGFSFODFXJUIUIFNFNPSZSFUFOUJPONFDIBOJTN
The D815EEA2, D815EPEA2, D815EFV, and D815EPFV boards require that
DIMMs be installed as shown in the figure below. The three DIMM sockets are
arranged as Banks 0, 1, and 2 as shown below. If installing a single DIMM,
install it in Bank 0. If installing two DIMMs, install them in Banks 0 and 1.
OM11621
01
2
5IF%&&"#PBSEJT4IPXO
To install DIMMs, follow these steps:
1. Observe the precautions in “Before You Begin”(see page 3).
2. Turn off all peripheral devices connected to the computer. Turn off and
unplug the computer.
3. Remove the computer cover and locate the DIMM sockets.
4. Holding the DIMM by the edges, remove it from its antistatic package.
5. Make sure the clips at either end of the socket are pushed away from the
socket as shown above.
6. Position the DIMM above the socket. Align the two small notches in the
bottom edge of the DIMM with the keys in the socket.
7. Insert the bottom edge of the DIMM into the socket.
8. When the DIMM is inserted, push down on the top edge of the DIMM until
the retaining clips snap into place. Make sure the clips are firmly in place.
9. Replace the computer cover.

*OUFM%FTLUPQ#PBSET%&&"%&1&"%&'7 
BOE%&1'72VJDL3FGFSFODF 
 *OTUBMMJOHUIF"(1$BSE3FUFOUJPO.FDIBOJTN
 $"65*0/
*OTUBMMUIF"(1DBSESFUFOUJPONFDIBOJTN3.POMZXIFOVTJOHBO
"(1DBSEXJUIBSFUFOUJPOOPUDIBTTIPXOJOUIFGJHVSFCFMPX6TFPGUIF
3.XJUIBOVOOPUDIFEDBSENBZJNQBJSWJEFPPQFSBUJPO4FFUIF
Intel
Desktop Boards
 D815EEA2, D815EPEA2, D815EFV, and D815EPFV 
Product Guide POUIF*OUFM&YQSFTT*OTUBMMFS$%30.GPS3.SFNPWBM
JOTUSVDUJPOT
OM10218
The RM encloses the desktop board’s AGP connector and provides additional
stability to the AGP card primarily for shipping.

 *OUFM%FTLUPQ#PBSET%&&"%&1&"%&'7
BOE%&1'72VJDL3FGFSFODF
After placing the desktop board on a flat, supportive surface, follow these steps
to attach the RM (A) to the AGP connector (B):
1. Locate the AGP connector (J8C1) on the desktop board as shown below.
Note that the desktop board’s silkscreen (C) indicates the correct final
position of the lever on the RM (E).
OM11624
CB
A
D
E
5IF%&&"#PBSEJT4IPXO
2. Position the RM over the AGP connector as shown below.
OM10111
3. Push the lever end of the RM in the direction of the arrow until the two rear
tabs (D) spread over the end of the AGP connector.
OM10180
4. Push the free end of the RM over the other end of the AGP connector and
press down until all four tabs snap underneath the AGP connector.
OM10181

*OUFM%FTLUPQ#PBSET%&&"%&1&"%&'7 
BOE%&1'72VJDL3FGFSFODF 
 *OTUBMMJOHUIF*04IJFME
The desktop board comes with an I/O shield. When installed in the chassis, the
shield blocks radio frequency transmissions, protects internal components from
dust and foreign objects, and promotes correct airflow within the chassis.
Install the I/O shield before installing the desktop board in the chassis. Place
the shield inside the chassis as shown in the following figure. Press the shield
into place so that it fits tightly and securely. If the shield doesn’t fit, obtain a
properly-sized shield from the chassis supplier.
OM11310

 *OUFM%FTLUPQ#PBSET%&&"%&1&"%&'7
BOE%&1'72VJDL3FGFSFODF
 *OTUBMMJOHUIF%FTLUPQ#PBSE
Refer to your chassis manual for specific instructions on installing and removing
the desktop board.
Secure the desktop board to the chassis standoffs using seven screws for the
D815EEA2 and D815EPEA2 boards, and six screws for the D815EFV and
D815EPFV boards. Insert the screws in the mounting holes shown in the
figures below.
OM11625
-PDBUJPOPGUIF.PVOUJOH4DSFX)PMFTGPSUIF%&&"
BOE%&1&"#PBSET
OM11626
-PDBUJPOPGUIF.PVOUJOH4DSFX)PMFTGPSUIF%&'7
BOE%&1'7#PBSET

*OUFM%FTLUPQ#PBSET%&&"%&1&"%&'7 
BOE%&1'72VJDL3FGFSFODF 
 *OTUBMMJOHUIF1SPDFTTPS
Follow the instructions included with the boxed processor.
 $POOFDUJOHUIF'BOT
The following figure shows the location of the fan connectors. If you are
installing a processor with an active fan heatsink, connect the processor’s fan
cable to the desktop board connector labeled J1B1 (fan 1). Connect the chassis
fan cables to the desktop board connectors labeled J9H1 (fan 2) and J4H1
(fan 3).
OM11627
J1B1
13
J9H1
1
3
J4H1
1
3
5IF%&&"#PBSEJT4IPXO

 *OUFM%FTLUPQ#PBSET%&&"%&1&"%&'7
BOE%&1'72VJDL3FGFSFODF
 *OTUBMMJOH"(1BOE(1"$BSET
 $"65*0/
3FNPWFUIF"(1WJEFPDBSECFGPSFJOTUBMMJOHPSVQHSBEJOHNFNPSZUP
BWPJEJOUFSGFSFODFXJUIUIFNFNPSZSFUFOUJPONFDIBOJTN
Follow these instructions to install Accelerated Graphics Port (AGP) and
Graphics Performance Accelerator (GPA) cards if they have a retention notch.
Remove the retention mechanism before installing an AGP or GPA card if the
card does not have a retention notch (see the Intel Desktop Boards D815EEA2,
D815EPEA2, D815EFV, and D815EPFV Product Guide on the Intel Express
Installer CD-ROM for RM removal instructions.)
1. Place the AGP or GPA card in the AGP universal connector.
2. Press down on the card until it is completely seated in the AGP universal
connector and the card retention notch snaps into place below the RM pin.
3. Secure the card’s metal bracket to the chassis back panel with a screw
(for AGP cards only).
 $POOFDUJOHUIF*%&%SJWFT
✏
/05&
*GUIFDBCMFTFMFDUPQUJPOJTFOBCMFEPOZPVS*%&ESJWFUIFQSJNBSZESJWF
NVTUCFDPOOFDUFEUPUIFCMBDLDPOOFDUPSPOUIF*%&DBCMF
The Intel®boxed desktop board package includes two IDE cables. Either cable
can connect two drives to the desktop board. The cables support the Ultra
DMA-33 (40-contact) or ATA-66/100 (40-contact, 80-conductor) transfer
protocols and are backward compatible with drives using slower IDE transfer
protocols.

*OUFM%FTLUPQ#PBSET%&&"%&1&"%&'7 
BOE%&1'72VJDL3FGFSFODF 
For the cable to function correctly:
1. Attach the cable end with the single connector (A), which is blue and
labeled P1, to the desktop board.
2. Attach the cable end with the two closely spaced connectors (B), which are
gray (for secondary drive) and black (for primary drive) and are labeled P2
and P3, to the drives.
OM11633
A
B
5IF%&&"#PBSEJT4IPXO

 *OUFM%FTLUPQ#PBSET%&&"%&1&"%&'7
BOE%&1'72VJDL3FGFSFODF
6TJOHUIF#*04$POGJHVSBUJPO+VNQFS
The BIOS configuration jumper determines the operating mode of the BIOS
Setup Program and enables BIOS recovery in the event of a failed BIOS
upgrade. The following figure shows the location of the configuration jumper
(J9G2).
OM11628
13
J9G2
5IF%&&"#PBSEJT4IPXO
The following table describes the BIOS mode for each jumper position.
+VNQFS1PTJUJPO .PEF %FTDSJQUJPO
Pins 1-2 Normal
(default) The BIOS uses the current configuration and passwords for booting.
Pins 2-3 Configure After the Power-On Self-Test (POST) runs,
the BIOS displays the Maintenance Menu.
Use this menu to clear passwords.
No jumper Recovery The BIOS recovers data from a recovery
CD-ROM or diskette in the event of a failed
BIOS upgrade. To upgrade or recover the
BIOS, see the instructions in the
*OUFM
%FTLUPQ#PBSET%&&"%&1&"
%&'7BOE%&1'71SPEVDU(VJEF
on the Intel Express Installer CD-ROM.


*OUFM%FTLUPQ#PBSET%&&"%&1&"%&'7 
BOE%&1'72VJDL3FGFSFODF 
#*044FUVQ1SPHSBN%FGBVMUT
For a complete list of the BIOS Setup settings, refer to the Intel World Wide
Web site:
http://support.intel.com/support/motherboards/desktop
and select one of the following TPSs:
x Intel Desktop Board D815EEA2/D815EPEA2 Technical Product
Specification
x Intel Desktop Board D815EFV/D815EPFV Technical Product
Specification
✏
/05&4
5PEJTBCMFUIFBVEJPJOUFSGBDFTFMFDUUIF1FSJQIFSBM$POGJHVSBUJPO
4VCNFOVVOEFSUIF"EWBODFE.FOVUIFOTFU"VEJP%FWJDFUPi%JTBCMFEw
5PEJTBCMFUIF-"/JOUFSGBDFTFMFDUUIF1FSJQIFSBM$POGJHVSBUJPO
4VCNFOVVOEFSUIF"EWBODFE.FOVUIFOTFU-"/%FWJDFUPi%JTBCMFEw

 *OUFM%FTLUPQ#PBSET%&&"%&1&"%&'7
BOE%&1'72VJDL3FGFSFODF
