Intel Stratix 10MX User manual

Intel® Stratix®10 MX FPGA
Development Kit
Intel® Stratix® 10 MX Board
Features
What’s in the Box
• Intel Stratix 10 MX FPGA
• 1SM21BHU2F53E2VGS1
• Embedded Intel FPGA USB
Download Cable II for FPGA
programming/debugging
• PCI Express® (PCIe®)
- 1X Gen3 x16 Root port
- 1X Gen3 x16 End port
• 2X 100GE QSFP28 ports
• 288-pin DIMM socket supporting
DDR4 and DDR-T module
• 16GB on-board DDR4 SDRAM
• Micro USB port
• Intel Stratix MX FPGA
development board
• 1X USB cable micro
• 1X DDR4 HILO memory card
• 1X DDR4 DIMM memory card
• 1X 250W Power Adapter
• Quick Start Guide
The following software and tools
are available for download:
• Documentation
• Schematicsanddesignles
• Intel Stratix 10 MX FPGA
Development Kit User Guide
• Golden System Reference Design
User Manual
• Design and development tools
• Intel Quartus® Prime Pro design
software
• Design examples
A Complete Development Environment
Available Resources
Quick start guide

Quick Start Guide | Intel Stratix 10 MX Development Kit
Verify Basic Operation
Electromagneticinterferencecausedbyanymodicationmadetothekitcontentsisthesoleresponsibilityofthe
user. This equipment is designated for use only in an industrial research environment.
Without proper anti-static handling, the board can be damaged. Therefore, use anti-static handling precautions when
touching the board.
FCC NOTICE: This kit is designed to allow:
(1) Product developers to evaluate electronic components, circuitry, or software associated with the kit to determine whether to incorporate such items in a
nishedproductand
(2) Softwaredeveloperstowritesoftwareapplicationsforusewiththeendproduct.Thiskitisnotanishedproductandwhenassembledmaynotberesold
orotherwisemarketedunlessallrequiredFCCequipmentauthorizationsarerstobtained.Operationissubjecttotheconditionthatthisproductnotcause
harmful interference to licensed radio stations and that this product accept harmful interference. Unless the assembled kit is designed to operate under
part 15, part 18 or part 95 of this chapter, the operator of the kit must operate under the authority of an FCC license holder or must secure an experimental
authorization under FCC Part 5 of CFR Title 47.
© Intel Corporation. All rights reserved. Intel, the Intel logo, the Intel Inside mark and logo, the Intel. Experience What’s Inside mark and logo, Altera, Arria, Cyclone, Enpirion, Intel Atom, Intel Core, Intel
Xeon, MAX, Nios, Quartus and Stratix are trademarks of Intel Corporation or its subsidiaries in the U.S. and/or other countries. *Other marks and brands may be claimed as the property of others. Intel
reserves the right to make changes to any products and services at any time without notice. Intel assumes no responsibility or liability arising out of the application or use of any information, product, or
servicedescribedhereinexceptasexpresslyagreedtoinwritingbyIntel.Intelcustomersareadvisedtoobtainthelatestversionofdevicespecicationsbeforerelyingonanypublishedinformationand
before placing orders for products or services. L01-44554-00
The BTS interface allows you to verify most of the
componentsonyourboard.AlldesignlesfortheBTS
are included in the <package root directory>\exam-
ples\board_test_system directory.
Using the BTS
BTS Interface
When you launch the BoardTestSystem.exeleinthat
directory, the screen shown in Figure 1 appears. To view
eachtab,selectthedesignfromtheConguremenu.Each
tab has options for interfacing to one or more of the board
components. The Help menu provides further information
about each test design.
Figure 1. BTS Interface
Figure 2. Power Measurement Tool
Power Measurement Tool
The power measurement tool that is available via the
buttons in the upper-left side of the BTS interface can be
used to see how any design—including your custom
design—affectstheFPGA’spowerconsumption.