Intellian s130N User manual

s130N
1.25m Maritime Satellite TV
Antenna System
Installation & Operation User Guide

Doc. No. UG-KM1003-V1.3
Serial number of the product
This serial number will be required for all troubleshooting or service inquiries.
© 2022 Intellian Technologies, Inc. All rights reserved. Intellian and the Intellian logo are
trademarks of Intellian Technologies, Inc., registered in the U.S. and other countries.
The s130N is a trademark of Intellian Technologies, Inc. Intellian may have patents,
patent applications, trademarks, copyrights, or other intellectual property rights covering
subject matter in this document. Except as expressly provided in any written license
agreement from Intellian, the furnishing of this document does not give you any license
to these patents, trademarks, copyrights, or other intellectual property. All other logos,
trademarks, and registered trademarks are the property of their respective owners.
Information in this document is subject to change without notice. Every effort has been
made to ensure that the information in this manual is accurate. Intellian is not responsible
for printing or clerical errors.
Disclaimer
The information in this user manual is subject to change without prior notice throughout
the product life cycle. The printed version of the user manual is periodically updated, so
this copy may contain inaccuracies or omissions compared to the most recent product
information. The most up-to-date information is available on our website at www.
intelliantech.com.

Table of Contents
3
Table of Contents
Chapter 1. Precautions 7
1.1 Warnings, Cautions, and Notes 7
1.2 General Precautions 7
Chapter 2. Certifications 8
Chapter 3. Introduction 11
3.1 Introduction of s130N 11
3.2 Features of s130N 12
Chapter 4. Planning Installation 13
4.1 Selection of Installation Site 13
4.1.1 Minimize Satellite Blockage 13
4.1.2 Avoid RF Interference 14
4.2 System Package 15
4.2.1 Above Deck Unit (ADU) 15
4.2.2 Antenna Control Unit (ACU) 16
4.2.3 Multi Switch Module (MSM) 16
4.2.4 Packing List 17
4.3 System Cables (Customer Supplied) 18
4.3.1 RF Cables (Customer Supplied) 18
4.3.2 Gyrocompass Cable (Customer Furnished) 18
4.4 Unpacking System Package 19
Chapter 5. Installing Above Deck Unit (ADU) 21
5.1 Antenna Dimensions 21
5.2 Antenna Mounting Hole Pattern 23
5.3 Designing Mast (Example Only) 24
5.4 Routing RF Cable on Mast (Example Only) 26
5.5 Removing Antenna from Wooden Pallet 27
5.6 Moving Antenna Above Mast 29
5.7 Mounting Antenna on Mast 30
5.8 Connecting RF Cable to Antenna 32
Chapter 6. Installing Below Deck Unit 35
6.1 Selection of BDU Installation Site 35
6.2 ACU Dimensions 35
6.3 MSM Dimensions 36
6.4 Mounting ACU/MSM 37
6.5 System Configurations 38
6.5.1 Single Antenna System Configuration 38
6.5.2 Dual Antenna System Configuration (Optional) 39
6.6 BDU Cable Connection 40
6.6.1 ACU Back Panel Connectors 40
6.6.2 MSM Back Panel Connectors 40
6.6.3 ACU Connector Pinout Guide 41

s130N - Maritime Satellite TV Antenna System
4
6.6.4 MSM Connector Pinout Guide 44
6.6.5 Connecting Power to ACU 45
6.6.6 Connecting ACU to ADU 45
6.6.7 Connecting ACU to Ship's Gyrocompass 46
6.6.8 Connecting RF Cables (RF1-4) to the Multi-Switch Module 47
6.7 ACU to PC Communication Setup 49
6.7.1 TCP/IP Connection 49
6.7.2 USB Connection 50
6.7.3 Wi-Fi Connection 51
Chapter 7. Operating Install Wizard 52
7.1 Turning On System 52
7.2 Accessing AptusNTV 52
7.3 Starting Install Wizard 53
Chapter 8. Operating ACU 58
8.1 Introduction 58
8.1.1 ACU Front Panel View 58
8.1.2 ACU Display Menu 59
8.2 Startup 60
8.3 Satellite Information 61
8.4 Interface Information 63
8.5 Antenna Information 64
8.6 Diagnosis 65
8.7 USB Function 67
8.7.1 Log Download 68
8.7.2 Firmware Upload 69
8.7.3 Backup to USB 70
8.7.4 Restore From USB 71
Chapter 9. Using AptusNTV 72
9.1 Introduction 72
9.2 Accessing AptusNTV for ACU 72
9.3 Main Page (Page Login) 73
9.4 Top Menus 74
9.5 Account Menu 75
9.5.1 Account 76
9.5.2 User Management 77
9.5.3 System Information 78
9.5.4 Support 79
9.6 Dashboard 80
9.6.1 How to Add & Remove Panels (Dashboard Setting) 80
9.6.2 How to Use Shortcut Settings 82
9.7 Setup 83
9.7.1 Ship 83
9.7.2 Antenna Setting 85
9.7.3 Satellite Set 88
9.7.4 Network 89
9.7.5 Wi-Fi 90

Table of Contents
5
9.7.6 Mediator (Optional) 91
9.8 System Tools 92
9.8.1 ACU Upgrade 92
9.8.2 Firmware Upgrade 94
9.8.3 Library 96
9.8.4 Satellite Preset 97
9.8.5 Backup & Restore 98
9.8.6 Reset 99
9.8.7 Logs 100
9.8.8 Diagnostic 101
9.9 Install Wizard 102
Chapter 10. Specification 103
10.1 Technical Specification 103
10.2 Environmental Specification 105
Chapter 11. Warranty 106
Chapter 12. Appendix 107
12.1 Appendix A. Tightening Torque Specification 107

s130N - Maritime Satellite TV Antenna System
6
List of Figures
Chapter 4. Planning Installation 13
Figure 1: Elevation Limit of Obstacles 13
Figure 2: Potential RF Interference 14
Figure 3: Radome and Pedestal 15
Figure 4: Front Panel of ACU 16
Figure 5: Back Panel of ACU 16
Figure 6: Front Panel of MSM 16
Figure 7: Back Panel of MSM 16
Chapter 5. Installing Above Deck Unit (ADU) 21
Figure 8: Antenna Side View 21
Figure 9: Antenna Bottom View (Outside/Inside) 22
Figure 10: Antenna Mounting Hole Template 23
Figure 11: Recommended Size of Mast 25
Figure 12: Routing Cable Through Outside of Mast 26
Figure 13: Installing Bolts for Antenna-Mast Assembly 30
Figure 14: Installing Sequence of Bolts 30
Figure 15: Cable Connection Inside Radome 34
Figure 16: Cable Connections on Power Switch Unit 34
Chapter 6. Installing Below Deck Unit 35
Figure 17: ACU Dimensions 35
Figure 18: MSM Dimensions 36
Figure 19: 19" Rack Mount ACU (MSM) 37
Figure 20: Single Antenna System Configuration (Basic Antenna System) 38
Figure 21: Dual Antenna System with Multi-Switch Connection Configuration 39
Figure 22: ACU Back Panel Connectors 40
Figure 23: MSM Back Panel Connectors 40
Figure 24: Connecting Power to ACU 45
Figure 25: ACU to Antenna Cable Connection 45
Figure 26: ACU to Ship's Gyrocompass Cable Connection 46
Figure 27: NMEA 0183 Gyrocompass Cable Connection 46
Figure 28: Multi-Switch Module Connection 47
Figure 29: Front Panel Management LAN Port Connection 49
Figure 30: Front Panel USB Port Connection 50
Figure 31: Rear Panel Wi-Fi Dongle Connection 51
Chapter 7. Operating Install Wizard 52
Figure 32: Front Panel Management LAN Port Connection 52
Chapter 8. Operating ACU 58
Figure 33: ACU Front Panel View 58

Precautions
7
Chapter 1. Precautions
1.1 Warnings, Cautions, and Notes
WARNING, CAUTION, and NOTE statements are used throughout this manual to emphasize important and
critical information. You must read these statements to help ensure safety and to prevent product damage.
The statements are defined below.
WARNING
WARNING
WARNING indicates a potentially hazardous situation that, if not avoided, could result in death or
serious injury.
CAUTION
CAUTION
CAUTION indicates a potentially hazardous situation that, if not avoided, could result in minor or
moderate injury. It may also be used to alert users about unsafe practices.
NOTE
NOTE
A NOTE statement is used to notify people of installation, operation, programming, or maintenance
information that is important, but not hazard-related.
1.2 General Precautions
Before you use the antenna, make sure that you have read and understood all safety requirements.
THIS WAY UP
•Place the boxes/crates on the oor with the arrow pointing up.
FRAGILE
•Since the Radome is fragile, handle it with care. Do not apply excessive pressure or shock. This
can cause surface cracking or other damage.
DO NOT STACK
•Do not stack boxes/crates as there is a risk boxes/crates may fall and be damaged.
KEEP DRY
•Always make sure the antenna is stored on a dry surface in a dry, well-ventilated area.
•The antenna is designed to withstand a normal rain shower; however, water resistance cannot
be guaranteed if the antenna is submerged.
*DO NOT SHIP VIA RAIL: Ensure not to ship any system via rail.
*DO NOT STORE THE ANTENNA WRAPPED IN A TARP, TENT, VINYL, OR OTHERS:
To avoid damage to radome paint, do not use a cover on the radome. Using any type of cover may
cause paint damage. Intellian radomes are designed to withstand exposure to rain, humidity, and sun/
UV rays when assembled according to Intellian instructions, and when the supplied approved hardware
and sealants are used. Under no circumstances should an Intellian radome be covered by any protective
covering that adheres, bonds, or clings to the surface, whether by self-adhesion or tension.

s130N - Maritime Satellite TV Antenna System
8
Chapter 2. Certifications
Doc Number IT22-DC0105-01
APAC
Headquarter/Innovation Center
EMEA
Rotterdam Office
AMERICAS
Irvine Office
18-7, Jinwisandan-ro, Jinwi-myeon
Pyeongtaek-si, Gyeonggi-do
17709 Korea
Sheffieldstraat 18, 3047AP, Rotterdam,
The Netherlands
11 Studebaker
Irvine, CA 92618 U.S.A.
T [phone]
T [phone]
T [phone]
F
F
C
C
C
C
P
P
a
a
r
r
t
t
1
1
5
5
S
S
u
u
b
b
p
p
a
a
r
r
t
t
B
B
D
D
e
e
c
c
l
l
a
a
r
r
a
a
t
t
i
i
o
o
n
n
o
o
f
f
C
C
o
o
n
n
f
f
o
o
r
r
m
m
i
i
t
t
y
y
(
(
D
D
o
o
C
C
)
)
We, Intellian Technologies, Inc. located at 18-7, Jinwisandan-ro, Jinwi-myeon (Chungho-ri), Pyeongtaek-si, Gyeonggi-do
17709 Korea declare under our sole responsibility that the product(s) described in the below to which this declaration
relates is in conformity with the requirement of the FCC Part 15 Subpart B.
P
P
r
r
o
o
d
d
u
u
c
c
t
t
I
I
n
n
f
f
o
o
r
r
m
m
a
a
t
t
i
i
o
o
n
n
:
:
P
P
r
r
o
o
d
d
u
u
c
c
t
t
N
N
a
a
m
m
e
e
(
(
s
s
)
)
:
:
Intellian s100N, 109cm Ku-band Maritime TVRO Antenna System
Intellian s130N, 125cm Ku-band Maritime TVRO Antenna System
M
M
o
o
d
d
e
e
l
l
N
N
u
u
m
m
b
b
e
e
r
r
(
(
s
s
)
)
:
:
T4-107XXX, T4-137XXX
T
T
e
e
s
s
t
t
R
R
e
e
s
s
u
u
l
l
t
t
S
S
t
t
a
a
n
n
d
d
a
a
r
r
d
d
R
R
e
e
q
q
u
u
i
i
r
r
e
e
m
m
e
e
n
n
t
t
R
R
u
u
l
l
e
e
S
S
e
e
c
c
t
t
i
i
o
o
n
n
T
T
e
e
s
s
t
t
R
R
e
e
p
p
o
o
r
r
t
t
N
N
u
u
m
m
b
b
e
e
r
r
R
R
e
e
s
s
u
u
l
l
t
t
FCC Part 15 Subpart B
Conducted Disturbance ANSI C63.4:2014 DREKFCC2206-0117 Pass
Radiated Disturbance ANSI C63.4:2014 DREKFCC2206-0117 Pass
S
S
u
u
p
p
p
p
l
l
e
e
m
m
e
e
n
n
t
t
a
a
r
r
y
y
I
I
n
n
f
f
o
o
r
r
m
m
a
a
t
t
i
i
o
o
n
n
:
:
T
T
e
e
s
s
t
t
i
i
n
n
g
g
O
O
r
r
g
g
a
a
n
n
i
i
z
z
a
a
t
t
i
i
o
o
n
n
D
D
T
T
&
&
C
C
C
C
o
o
.
.
,
,
L
L
t
t
d
d
.
.
42, Yurim-ro, 154 beon-gil, Cheoin-gu, Yongin-si, Gyeonggi-do 17042, Korea
T
T
e
e
c
c
h
h
n
n
i
i
c
c
a
a
l
l
/
/
C
C
o
o
m
m
p
p
l
l
i
i
a
a
n
n
c
c
e
e
F
F
i
i
l
l
e
e
H
H
e
e
l
l
d
d
b
b
y
y
:
:
I
I
n
n
t
t
e
e
l
l
l
l
i
i
a
a
n
n
T
T
e
e
c
c
h
h
n
n
o
o
l
l
o
o
g
g
i
i
e
e
s
s
,
,
I
I
n
n
c
c
.
.
18-7, Jinwisandan-ro, Jinwi-myeon, Pyeongtaek-di, Gyeonggi-do 17709 Korea
P
P
l
l
a
a
c
c
e
e
a
a
n
n
d
d
D
D
a
a
t
t
e
e
o
o
f
f
i
i
s
s
s
s
u
u
e
e
:
:
Gyeonggi-do, Korea on 17 June, 2022
A
A
u
u
t
t
h
h
o
o
r
r
i
i
t
t
y
y
:
:
Y
Y
e
e
o
o
n
n
h
h
o
o
K
K
i
i
m
m
S
S
i
i
g
g
n
n
a
a
t
t
u
u
r
r
e
e
:
:
/
/
C
C
T
T
O
O
,
,
R
R
&
&
D
D
D
D
a
a
t
t
e
e
:
:
A
A
u
u
g
g
u
u
s
s
t
t
,
,
2
2
3
3
,
,
2
2
0
0
2
2
2
2

Certifications
9
Doc Number IT22-DC0207-02
Intellian Technologies, Inc.
EMEA & APAC Headquarters
348-5 Chungho-Ri, Jinwi-Myeon
Pyeongtaek-Si, Gyeonggi-Do, 451-862 Korea
Tel: [phone]
Intellian Technologies USA, Inc.
US Headquarters
11 Studebaker
Irvine, CA 92618 USA
Tel: [phone]
RED Declaration of Conformity (DoC)
We, Intellian Technologies, Inc. located at 18-7, Jinwisandan-ro, Jinwi-myeon, Pyeongtaek-si, Gyeonggi-do 17709,
Korea declare under our sole responsibility that the product(s) described in the below to which this declaration relates is
in conformity with the essential requirements and other relevant requirements of the Radio Equipment Directive
(2014/53/EU).
Product Information:
Product Name(s):
Intellian s100N, 109cm Maritime TVRO Antenna System
Intellian s130N, 125cm Maritime TVRO Antenna System
Model Number(s): T4-107XXX, T4-137XXX
To provide the presumption of conformity in accordance to Annex III(encompassing Annex II) of Directive 2014/53/EU;
the following harmonized standards and normative documents are those to which the product’s conformance is declared,
and by specific reference to the essential requirements of Article 3 of the Directive 2014/53/EU.
2014/53/EU Article Standard(s) Applied in Full Result
SAFETY (Art 3.1.a) EN IEC 62368-1:2020+A11:2020 Pass
EMC (Art. 3.1.b) EN 301 843-1 Pass
SPECRTUM (Art. 3.2) EN 303 372-1 Pass
Supplementary Information:
Notified Body Involved:
(Testing Organization)
- Safety, EMC, SPECTRUM
DT&C Co., Ltd.
42, Yurim-ro, 154 beon-gil, Cheoin-gu, Yongin-si, Gyeonggi-do 17042, Korea
Technical/Compliance File
Held by:
Intellian Technologies, Inc.
18-7, Jinwisandan-ro, Jinwi-myeon, Pyeongtaek-di, Gyeonggi-do 17709, Korea
Place and Date of issue: Gyeonggi-do, Korea on 23 June. 2022
Authority: Yeonho Kim Signature: _______ __
/ CTO, R&D
Date: 23th Aug 2022 ___

s130N - Maritime Satellite TV Antenna System
10
.,.
APAC
Headquarter/Innovation Center
EMEA
Rotterdam Office
Doc Number IT22-DC0721-05
AMERICAS
Irvine Office
18-7, Jinwisandan-ro, Jinwi-myeon
Pyeongtaek-si, Gyeonggi-do
17709 Korea
Tempelhof 12
3045 PV, Rotterdam
The Netherlands
11 Studebaker
Irvine, CA 92618 U.S.A.
T [phone]
T [phone]
T [phone]
UK-CA Declaration of Conformity
We, Intellian Technologies, Inc. located at 18-7, Jinwisandan-ro, Jinwi-myeon, Pyeongtaek-si, Gyeonggi-do 17709,
Korea declare under our sole responsibility that the product(s) described in the below to which this declaration relates is
in conformity with the essential requirements and other relevant requirements according to UK legislation Electrical
Equipment (Safety) Regulations 2016 (S.I. 2016/1101).
Product Information:
Product Name(s): Intellian s100N TVRO Antenna System
Intellian s130N TVRO Antenna System
Model Number(s): T4-107BT3, T4-137BT3
To provide the presumption of conformity in accordance to Annex III(encompassing Annex II) of Directive 2014/53/EU;
the following harmonized standards and normative documents are those to which the product’s conformance is declared,
and by specific reference to the essential requirements of Article 3 of the Directive 2014/53/EU.
2014/53/EU Article Standard(s) Applied in FullResult
SAFETY (Art 3.1.a) EN 62368-1 Pass
EMC (Art. 3.1.b) EN 301 843-1 Pass
SPECTRUM (Art. 3.2)
EN 301-360
EN 301-459
EN 303-978
Pass
A
A
u
u
t
t
h
h
o
o
r
r
i
i
t
t
y
y
:
:
Y
Y
e
e
o
o
n
n
h
h
o
o
.
.
K
K
i
i
m
m
S
S
i
i
g
g
n
n
a
a
t
t
u
u
r
r
e
e
:
:
/
/
C
C
T
T
O
O
,
,
R
R
&
&
D
D
D
D
a
a
t
t
e
e
:
:
A
A
u
u
g
g
u
u
s
s
t
t
1
1
,
,
2
2
0
0
2
2
2
2

Introduction
11
Chapter 3. Introduction
3.1 Introduction of s130N
Intellian’s s130N WorldView™ is a digital marine satellite antenna system specically designed for reception of
worldwide Ku-band satellites, as well as the DIRECTV®services, enabling seamless and uninterrupted satellite
TV reception across multiple coverage areas and service providers.
The dual-band 3-axis marine satellite antenna system is capable of receiving two Ka-band satellite signals and
one Ku-band signal for DIRECTV®North American programming, making all channels available for viewing
simultaneously. The Intellian Ku and Ka-band WorldView™ Trio LNB™ with triple feed horn selects a satellite
television provider and connects to a satellite receiver. The WorldView™ Trio LNB can then automatically switch
frequency, depending on the region the antenna is operating in.
All Intellian antenna systems are designed, manufactured, and tested to meet industry standards for vibration
and shock in nominal weather conditions.

s130N - Maritime Satellite TV Antenna System
12
3.2 Features of s130N
Simultaneous Reception of DIRECTV®Ka and Ku-band
The antenna solution incorporates 3 feed horns to simultaneously receive 3 satellites: 2 DIRECTV® 99º and
103º Ka-band satellites and 1 DIRECTV® 101º Ku-band satellite. This allows viewers of satellite programs to
watch every DIRECTV® channel without changing satellites.
User Friendly Five Cable Conguration
A user friendly, ve cable conguration for global TVRO installers and engineers. There are four independent RF
cables that connect the Worldview™ LNB to the multi-switch directly and one power cable that is connected to
the ACU.
All New Hardware & Standardized Modular Components
All New hardware and pedestal based on our quality proven VSAT terminals. Modular components are used
throughout the new TVRO range, such as dynamic motor brakes with integrated encoders, the Main Control Unit,
and the skew assembly. By sharing common modules across Intellian’s new TVRO antenna line, the number of
spare parts required is reduced.
Hands-Free WorldView™Trio LNB
The built-in Worldview™ Trio LNB module will automatically switch to the corresponding polarization and local
frequency to receive the target satellite signal. This allows users to enjoy any satellite TV service around the world
without the need to switch LNBs.
Unlimited Azimuth Range
This Intellian-only solution allows the system to operate in an unlimited azimuth rotating range. It prevents cable
problems, such as disconnecting, cutting, and wrapping, that might otherwise occur in the eld.
DVB-S2 Digital TV Receptions
Some of the HD TV services have moved to DVB-S2 transmission formats and there will be more in the future.
Thanks to Intellian's groundbreaking DVB-S2 digital TV technology, now boaters are able to enjoy their favorite
Sat TV entertainment at sea–just like at home.
19-inch Rack-mount Type ACU (Antenna Control Unit)
Intellian s130N ACU offers a pre-programmed global satellites library and provides the power to the antenna.
Detailed information and satellite changes are displayed on an OLED display on the ACU front panel.
Multi Switch Module
The Intellian multi-switch module provides simple connections to different types of satellite receivers. The built-
in SWM outputs and standard multi-switch outputs support both single wire and standard installations. This
reduces the need for additional hardware and reconguration of the system when viewing programs on multiple
TV screens.
AptusNTV Wireless Connectivity
Intellian's all new integrated M&C platform AptusNTV provides a responsive web user interface. The
Installation Wizard function congures the antenna system automatically and minimizes operators’ work on
system installation and operation. Any kind of wireless device, such as a PC, laptop or smartphone, can
connect to the ACU to manage and control the antenna system.

Planning Installation
13
Chapter 4. Planning Installation
The antenna installation requires extreme precaution and safety measures given its size and weight. Failure to
follow the correct installation process may lead to injury of the installer and/or cause damage to the system. To
maximize the performance of the system, a thorough review of this installation guide is strongly
recommended. In addition, you should execute the installation process as it is noted in this manual.
4.1 Selection of Installation Site
The system should be placed in an area onboard the vessel with little to no RF signal blockage. The
antenna unit should have direct line-of-sight with the desired satellite without any obstacles in the beam
path. Minimum distances between the antenna and other onboard devices must also be considered
during installation. Install the antenna in accordance with the following procedures to ensure maximum
performance.
4.1.1 Minimize Satellite Blockage
The ideal antenna site should have a clear view of the horizon or satellite with all around clearance. Make
sure there are no obstacles within the EL range -15° to +115° from the center of the antenna.
Any obstacles can prevent the antenna from tracking the satellite signal.
Obstruction
Look angle
-15° to +115°
Above Deck Unit
(ADU)
+115°
-15°
Figure 1: Elevation Limit of Obstacles

s130N - Maritime Satellite TV Antenna System
14
4.1.2 Avoid RF Interference
Do not install the antenna near the high power shortwave radar. Most radar transmitters emit RF energy
within an elevation range of -15° to +15°. For this reason, you should position the antenna at least 15 feet
(4.6 m) away from the radar.
Radar
+15°
-15°
Above Deck Unit
Above Deck Unit
Minimum
4.6 m (15.09 feet)
Figure 2: Potential RF Interference
WARNING
WARNING
Never place the antenna in the beam path of the radar, regardless of distance. The high power shortwave
radar may impair its performance or damage the antenna.

Planning Installation
15
4.2 System Package
4.2.1 Above Deck Unit (ADU)
The ADU includes an antenna pedestal inside a radome assembly unit. The pedestal consists of a satellite
antenna main dish with RF components mounted on a stabilized pedestal. The radome protects the
antenna pedestal assembly unit from the severe marine environment.
Figure 3: Radome and Pedestal

s130N - Maritime Satellite TV Antenna System
16
4.2.2 Antenna Control Unit (ACU)
The ACU provides power to and controls the various settings of the antenna. ACU features include the
following:
•OLED display
•USB port to download logs and upgrade firmware (no PC required)
•Wi-Fi access
•AptusNTV web application
Figure 4: Front Panel of ACU
Figure 5: Back Panel of ACU
4.2.3 Multi Switch Module (MSM)
The Intellian Multi-Switch Module provides built-in SWM and standard multi-switch outputs, allowing
configuration with DIRECTV satellite receivers and standard satellite receivers.
Figure 6: Front Panel of MSM
Figure 7: Back Panel of MSM

Planning Installation
17
4.2.4 Packing List
Before beginning installation, make sure you have all the included components.
Item Q'ty Size Description
Above Deck Unit (ADU) 1 Radome and pedestal
Below Deck Unit (BDU) 1 431 mm x 411 mm x
44 mm Antenna Control Unit (ACU)
Multi-Switch Module (MSM) 1 431 mm x 411 mm x
44 mm Multi-Switch Module for s-Series
Quick Installation Guide (QIG) 1 Installation guide
Mounting Template 1 Real size drawing of antenna mounting hole
pattern
ACU Rack Mount Bracket 2 For installing ACU to 19-inch rack
Flat Head Screw 10 M4 x 12L
MSM Rack Mount Bracket 2 For installing MSM to 19-inch rack
Flat Head Screw 10 M4 x 12L
8-way splitter for SWM 2 SWM (on MSM) to DIRECTV receivers
AC Power Cord (CEEE7/7) 2 1.5 m Power cord for ACU/MSM (220 V)
Ethernet Cable (RJ45 to RJ45) 1 1 m To connect ACU to PC
Wi-Fi Dongle 1 For Wi-Fi connection
Hex Bolt-S F 5 M12 x 80L Bolt kit for antenna-deck (mast) assembly
(1 spare set included)
Hex-S Bolt-S F 5 M6 x 40L Bolt kit for radome assembly
(1 spare set included)
Cable Tie 20 140 mm For mounting cables

s130N - Maritime Satellite TV Antenna System
18
4.3 System Cables (Customer Supplied)
4.3.1 RF Cables (Customer Supplied)
Due to the signal loss across the length of RF coaxial cable on L-Band, only use 75 Ω coaxial cable types
for the RF cables in a standard system installation. The use of different types of cables (50 Ω coaxial
types, etc.) can cause problems. If you need RF cables that run longer than the maximum cable length
recommended, contact Intellian Technical Support for assistance.
Cable Requirements(Antenna Cable/ RF1 ~ RF4 Cable)
Coaxial Cable Type Connector Max. DC Resistance Attenuation @ 2GHz Max. Cable Length
(≤16dB loss @ 2GHz)
LMR300-75 F (M) to F (M) 0.8 Ω
(Antenna cable only)
0.279 dB/m 50 meters
LMR400-75 0.187 dB/m 80 meters
NOTE
NOTE
•Optimal tightening torque for F type RF connector: 1.0 N-m
•Maximum RF loss at 2 GHz: 16 dB including connectors
4.3.2 Gyrocompass Cable (Customer Supplied)
The following general types of gyrocompass cables are recommended for compatible connection to
Intellian antennas used in various environments.
Standard NMEA 2000 NMEA 0183
Connector Type Mini-C 5 pin connector 2 pin terminal block connector
Cable Type 5-wire single cable 2-wire cable with one enclosed shield
cable
Heading Information Supports PGN, 127250: Vessel Heading Supports $HEHDT, baud rate 4800,
format 8N1 as standard

Planning Installation
19
4.4 Unpacking System Package
CAUTION
CAUTION
•The package box on the pallet should be lifted by a forklift.
•Follow the steps in order for easy and safe unpacking.
The pallet should be lifted by a forklift. To unpack the wooden crate, follow the procedure below.
1. Open the side panel with an attached sticker paper (Wooden Crate Unpack Guide) by removing the
xing screw (1 ea) and clips (8 ea).
1-1
1-2 1-3
Fixing Clip
: 8 EA
: 1 ea
Fixing screw
8mm
2. The ACU box is placed inside of the side panel. Remove the xing screws (2 ea) from the holding
bracket, and then remove the ACU box from the crate.
2
ACU Box

s130N - Maritime Satellite TV Antenna System
20
3. Remove the clips (6 ea) on the top panel, and then detach the top panel by carefully pulling it as shown
in the figure below.
: 6 ea
3-1 3-2
4. Remove the xing screws (3 ea side/1 ea back) that secure the side panel (right) and back panel, and
then detach the panels.
: 4 ea
4
5. Remove the xing screws (2 ea) from the MSM box holding bracket (located on the left side panel), and
then remove the MSM box from the crate.
MSM Box
5
6. Remove the xing screws (3 ea) that secure the side panel (left), then detach the panel.
6-2
: 3 ea
6-1