Intellian v80G User manual

Global Leader In Marine Satellite Antenna Systems
v80G
Installation and Operation User Guide

v80G – Marine Satellite Communication System
2

Serial number of the product
This serial number will be required for the all troubleshooting or service inquiries.
© 2017 Intellian Technologies, Inc. All rights reserved. Intellian and the Intellian
logo are trademarks of Intellian Technologies, Inc., registered in the U.S. and other
countries. The v-Series and the v80G are trademarks of Intellian Technologies,
Inc. Intellian may have patents, patent applications, trademarks, copyrights, or
other intellectual property rights covering the subject matter in this document.
Except as expressly provided in any written license agreement from Intellian,
the furnishing of this document does not give you any license to these patents,
trademarks, copyrights, or other intellectual property.
All other logos, trademarks, and registered trademarks are the property of their
respective owners. Information in this document is subject to change without
notice.
Every effort has been made to ensure that the information in this manual is
accurate. Intellian is not responsible for printing or clerical errors.
Doc. No. UM-O0-170319-V1.7

INDEX

7
INDEX
INTRODUCTION 9
Intellian v80G Introduction 10
Intellian v80G Features 11
Basic System Conguration 12
INSTALLING THE ANTENNA 15
System Package 16
Planning the Installation 21
Antenna Installation 24
INSTALLING THE ACU 35
Mounting the ACU 36
Ship Gyrocompass Connection 38
PC to ACU Communication Setup 42
Wi-Fi Connection 44
OPERATING THE ACU 47
Introduction 48
Normal Mode 49
Setup Mode 53
Installation Settings 54
Antenna Settings 57
Satellite Settings 68
System Settings 75
Aptus®83
Introduction to Aptus®84
Software Installation 85
PC to ACU Communication Setup 86
Toolbar Menus 89
System Property Status Dashboard 92
Work View Tabs 96
Aptus WEB 113
Introduction 114
Main Page 115
Antenna Settings 119
Firmware & Conguration 127
Administration 134
APPENDIX : Java Download and Install Guide 143
TECHNICAL SPECIFICATION 147
ENVIRONMENTAL SPECIFICATION 148
WARRANTY 149

v80G – Marine Satellite Communication System
8

9
INTRODUCTION
Intellian v80G Introduction
Intellian v80G Features
Basic System Congurations
INTRODUCTION

v80G – Marine Satellite Communication System
10
Intellian v80G introduction
The Intellian v80G is a fully integrated 83cm (32.7”) Ku-band stabilized maritime
VSAT system that acquires and locks onto the satellite without requiring a separate
input from the ship’s gyro-compass. This allows you to have a reliable, “always-on”
broadband connection at sea.
The Intellian v80G is the smallest antenna that works without the need for a spread
spectrum satellite network transmission. This provides a compact system in a
TDMA or SCPC transmission format. The higher-gain performance design enables
the antenna to operate on the fringes of the signal footprint with superior operation.
With its 3-axis stabilization platform, the v80G has superior tracking performance
that is nearly equal to the 1 meter grade VSAT antenna system. The v80G can
be congured for SCPC, broadband or hybrid satellite networks. It is suitable for
high-speed internet, weather & chart updates, email, le and image transfer, video
conference, VoIP, VPNs and database backup. The v80G is designed and built to
meet or exceed industry and military standards for vibration, shock and EMC to
ensure greatest reliability in any sea conditions.
The Antenna Control Unit (ACU) supports Wi-Fi connectivity for a simple remote
PC connection. The v80G operates with just two cables to the antenna, combining
TX signals and +48V DC BUC power in one cable and the RX signal in the second
cable.

11
INTRODUCTION
Intellian v80G features
Gyro-Free Satellite Search Capability
Intellian’s new generation Gyro-free satellite search function enables the v80G to
acquire and lock onto a satellite signal without requiring a separate input from a
ship’s gyro-compass. If a heading device is available, it can be connected via an
NMEA interface.
DVB-S2 and Narrowband Carrier Decoding
The v80G is capable of decoding DVB-S/DVB-S2 and narrow band carriers
simultaneously.
Combined BUC Power and TX Signal
The v80G offers a single cable solution that supplies 48v DC power and TX signal
together from its control unit via one RF cable.
Wide Elevation Angle
The v80G’s wide-look angle pedestal is designed for extremely low or high latitude
areas, such as the Scandinavian Peninsula or the Equatorial regions.
Wi-Fi Connectivity
Connect to the ACU(Antenna Control Unit) via Wi-Fi for complete control and
monitoring whenever you are on a vessel. The built-in Wi-Fi enables the ACU to be
wirelessly connected and can be either enabled or disabled. Any kind of wireless
devices such as PCs, laptops and smartphones can be used to connect to the ACU
and monitor, control and change the settings of the system wirelessly. An Intellian
Aptus Mobile App is available for download to access to the ACU via Wi-Fi and
operate the antenna from iPhone, iPad.
Remote Management Solution
The v80G can be accessed, monitored, and controlled from any location in the
world. Additionally, hundreds of routine maintenance activities can be automated.
These functions include operating rmware upgrades, tracking parameters resets,
and system diagnosis including the event history logging feature.
Modem Formats and Auto Beam Switch Capability
The v80G supports a number of open standards enabling satellite network
connectivity. In addition, the v80G supports Auto Beam Switching via OpenAMIP
protocol of iDirect and ROSS Open Antenna Management (ROAM) protocol of
Comtech.
Intellian Network Device Monitoring
Connection between the Intellian LAN port on the ACU to other Intellian antenna
systems enables real time monitoring and control of all the connected systems
from the v80G. This function provides an integrated control of multiple devices by a
single log-in to the Intellian Aptus Web software.

v80G – Marine Satellite Communication System
12
Basic System Conguration
For your satellite communication system to work properly, the system will have to
be connected with all of the provided components properly, as shown in the gure
below. Separate purchase of a satellite modem, ship’s gyrocompass, and Intellian
Dual VSAT Mediator may be required.
Basic System
Conguration
(8W BUC)
Basic System
Conguration
(4W BUC)
RS232 & RS422 Ethernet USBRS232ACU1 ACU2Console
NMEA
Heading
+ -
ANT1 ANT2 MODEM
RX MODEM Interface ACU Interface PC Interface
ANT1 ANT2 MODEM
TX
Satellite Modem
(Not supplied)
Antenna Control Unit
Modem
Interface
BUC
Interface
PC
InterfaceModem RX
Modem TX
NMEA
Antenna RXAntenna TX
Antenna
Tx
Antenna
Rx
Antenna
Tx
Antenna
Rx
AC 100 ~ 240V
(50~60Hz)
Ship’s Gyrocompass
(Not supplied)
Antenna
Unit 1
Antenna
Unit 2
AC 100 ~ 240V (50~60Hz)
Satellite Modem
Antenna
Control Unit 2
Antenna
Control Unit 1
Mediator
Ship’s
Gyrocompass
(Not supplied) TX RX Interface
PC
PC
RS232 & RS422 Ethernet USBRS232ACU1 ACU2Console
NMEA
Heading
+ -
ANT1 ANT2 MODEM
RX MODEM Interface ACU Interface PC Interface
ANT1 ANT2 MODEM
TX
Satellite Modem
(Not supplied)
Antenna Control Unit
Modem
Interface
BUC
Interface
PC
Interface
Modem RX
Modem TX
NMEA
Antenna RXAntenna TX
Antenna
Tx
Antenna
Rx
Antenna
Tx
Antenna
Rx
AC 100 ~ 240V
(50~60Hz)
Ship’s Gyrocompass
(Not supplied)
Antenna
Unit 1
Antenna
Unit 2
AC 100 ~ 240V (50~60Hz)
Satellite Modem
Antenna
Control Unit 2
Antenna
Control Unit 1
Mediator
Ship’s
Gyrocompass
(Not supplied) TX RX Interface
PC
PC
NOTE: BUC power should set to ON from the modem when you connect to a 4W
BUC. BUC power should set to OFF from the modem when you connect to an 8W
BUC.

13
INTRODUCTION
Dual System
Conguration
CAUTION : Please ensure that the TX and RX cables are correctly terminated
in the power box inside the radome and on the ACU. Failure to connect these
correctly will cause system damage. Do not switch cables.
RS232 & RS422 Ethernet USBRS232ACU1 ACU2Console
NMEA
Heading
+ -
ANT1 ANT2 MODEM
RX MODEM Interface ACU Interface PC Interface
ANT1 ANT2 MODEM
TX
Satellite Modem
(Not supplied)
Antenna Control Unit
Modem
Interface
BUC
Interface
PC
InterfaceModem RX
Modem TX
NMEA
Antenna RXAntenna TX
Antenna
Tx
Antenna
Rx
Antenna
Tx
Antenna
Rx
AC 100 ~ 240V
(50~60Hz)
Ship’s Gyrocompass
(Not supplied)
Antenna
Unit 1
Antenna
Unit 2
AC 100 ~ 240V (50~60Hz)
Satellite Modem
Antenna
Control Unit 2
Antenna
Control Unit 1
Mediator
Ship’s
Gyrocompass
(Not supplied) TX RX Interface
PC
PC

v80G – Marine Satellite Communication System
14

15
INTRODUCTION
INSTALLING THE ANTENNA
System Package
Antenna Unit
ACU (Antenna Control Unit)
Installation Kit
Planning the Installation
Selection of Antenna Installation Site
Congure Radiation Hazard/Blockage Zones
System Cables
Power Requirement
Tools Required for Installation
Antenna Installation
Unpacking the Wooden Crate
Antenna Dimensions
Antenna Mounting Templates
Position the Radome
Open the Radome Hatch
Mount the Radome
RF Cable Connections
Secure the RF Cables

v80G – Marine Satellite Communication System
16
System Package
The package of the Intellian v80G consists of antenna unit, ACU and installation kit box.
Antenna unit
ACU
Installation kit box

17
INSTALLING THE ANTENNA
Antenna Unit
The antenna unit includes an antenna pedestal inside a radome assembly. The
pedestal consists of a satellite antenna main dish with RF components mounted on
a stabilized pedestal. The radome protects the antenna pedestal assembly from the
severe marine environment.
Antenna Unit

v80G – Marine Satellite Communication System
18
ACU (Antenna Control Unit)
ACU provides power to the antenna and Block Up Converter (BUC). The digital
Vacuum Fluorescent Display (VFD) allows for easy operation of the ACU, even in
the dark.
The functions of the ACU are as follows:
• System startup
• Setting the target satellite
• Editing satellite information
• Setting the antenna parameters
• Setting the antenna manual search
• Setting the LNB local frequency
• Setting radiation hazard or blockage zone
• Setting modem connections
• Setting GPS and Gyrocompass
• Display power status
• Performing real-time diagnostic tests
• Backup and restore the system settings
• Set up the interface with a PC
• Supports Wi-Fi ACU operation
• Recording antenna activities and rmware upgrade through USB
• Built-in web-based remote control management
• Front panel Management Ethernet port
Antenna Control Unit
Front panel
Rear panel

19
INSTALLING THE ANTENNA
Installation Kit
Contains the items required for installing the antenna unit and ACU on the vessel.
ACU box
Description Q'ty Size Remarks
Antenna Control Unit (ACU) 1 43.1 x 38 x 4.4cm Antenna Control Unit
User Manual 1
RF Hazard Sticker 1 Radiation Safety Distance Label
Mounting Template 1
Wi-Fi Antenna 1 110mm
USB Flash Drive 1
iDirect Modem Cable Pin
Connection Manual 1
Components box
Description Q'ty Size Remarks
ACU Bracket (Rack) 2 ACU-19inch Rack
ACU Bracket (Table) 2 ACU-Table
RG6 Cable 2 3m ACU to Modem
AC Power Cord (CEEE7/7) 1 1.5m ACU Power
AC Power Cord (USA) 1 1.5m ACU Power
PC Serial Cable 1 1.8m ACU to PC
USB Cable (A-A) 1 1.8m ACU to PC
Ethernet Cable (RJ45/LAN) 1 1.5m ACU to PC
iDirect Interface Cable 1 1.5m ACU to Modem
D-sub 9 pin Male Connector 2 - ACU
N to F Adaptor 2 N(Male) to F(Female) Adaptor
Hex. Bolt 5 M12 x 80L
Antenna mounting 4 Sets,
Spare 1 set
Flat Washer 5 M12
Spring Washer 5 M12
Hex Nut 10 M12
Hex Head Wrench Bolt 5 M6 x 40L
Radome (Spare Bolts)
Spring Washer and Flat Washer 5 M6
Self-Tapping Screw 5 Ø4 x 16 Table Mount Bracket
Flat Head Screw 10 M4 x 12L Rack Mount Bracket ACU
Sems Bolt 5 M3 x 12L Table Mount Bracket ACU

v80G – Marine Satellite Communication System
20
Tools required for Installation
Power Drill
11 mm Spanner/Torque Wrench
8 mm Spanner
Phillips Head
Screwdriver
Flat Head
Screwdriver 13 mm Spanner/Torque Wrench
4 mm Alen/Hex key
5 mm Alen/Hex key
10 mm Drill Bit
Pencil