Inter-m PG-6104 User manual

Operation Manual
Program Exchanger
PG-6104
* Rack mount pro ucts in the Western Hemisphere(North America, South America,
an the Caribbean) o not have han les installe ue to customer preference.

PROGRAM EXCHANGER
Welcome
Welcome
A personal welcome to you from the mana ement and employees of Inter-M
All of the co-workers here at Inter-M are e icate to provi ing excellent pro ucts with inherently goo value,
an we are elighte you have purchase one of our pro ucts.
We sincerely trust this pro uct will provi e years of satisfactory service, but if anything is not to your complete
satisfaction, we will en eavor to make things right.
Welcome to Inter-M, an thank you for becoming part of our worl wi e exten e family!
RISK OF ELEC RIC SHOCK
DO NO OPEN
CAutION
CAU ION: O REDUCE HE RISK OF ELEC RIC SHOCK.
DO NO REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PAR S INSIDE.
REFER SERVICING O QUALIFIED SERVICE PERSONNEL.
WARNING
o prevent fire or shock hazard, do not
expose the unit to rain or moisture.
*WARNING FOR YOUR PRO EC ION PLEASE READ HE FOLLOWING-WA ER AND MOIS URE: Unit should not be used near water(e.g.
near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc). Care should be taken so than objects do
not fall and liquids are not spilled into the enclosure through openings.
*Do not install this equipment in a confined space such as a book case or similar unit.
* his apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such vases, shall be placed on the apparatus.
* his apparatus shall be connected to a mains socket outlet with a protective earthing connection.
*
It has heed to be easy to disconnect the device. o disconnect the device from power, separate AC input cable from inlet or unplug the AC Cord.
* he socket-outlet shall be installed near the equipment and shall be easily accessible.
CAutION
* hese servicing instructions are for use by qualified service personnel only. o reduce the risk of electric shock, do not perform any servicing
other than that contained in the operating instructions unless you are qualified to do so.
NOtE
*his equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. hese limits are
designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. his equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at his own expense.
his symbol is intended to alert the user to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
his symbol is intended to alert the user to the
presence of important operation and maintenance
(servicing) instructions in the literature accompanying
the appliance.
Caution: o prevent electric shock do not use this (polarized) plug with
an extension cord, receptacle or other outlet unless the blades
can be fully inserted to prevent blade exposure.
Attentions: Pour prévenir les chocs électriques ne pas utiliser cette
fiche polarisée avec un prolongateur, une prise de courant
on une autre sortie de courant, sauf si les lames peuvent
étre insérées à fond sans en laisser aucune partie à
découvert.

PROGRAM EXCHANGER
1
PG-6104
Contents
Contents
Unpackin .......................................................................................................................................2
Installation
Environment....................................................................................................................................2
Important Safety Instructions.............................................................................................................2
Features............................................................................................................................................3
Operation ........................................................................................................................................3
Front Panel ......................................................................................................................................4
Rear Panel .......................................................................................................................................5
Su estions for Rack Installation ................................................................................................6
Applications ....................................................................................................................................7
Block Dia ram ................................................................................................................................8
Specifications ..................................................................................................................................9
Service
Proce ures....................................................................................................................................10
Schematic.....................................................................................................................................10
Parts List .......................................................................................................................................10
Warranty .......................................................................................................................................10

PROGRAM EXCHANGER
Unpackin
2PG-6104
Unpackin
Although your PG-6104 is neither complicate nor ifficult to operate, we recommen you take a few minutes
to rea this brief manual an familiarize yourself with the important information regar ing pro uct features,
setup an operation.
As with most electronic evices, we strongly recommen you retain the original packaging. In the unlikely event
the pro uct must be returne for servicing, the original packaging (or reasonable equivalent) is require .
Installation
Installation
Environment
Never place this pro uct in an environment which coul alter its performance or re uce its service life. Such
environments usually inclu e high levels of heat, ust, moisture, an vibration.
IMPORTANT SAFETY INSTRUCTIONS
1. Rea these instructions.
2. Keep these instructions.
3. Hee all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with ry cloth.
7. Do not block any ventilation openings. Install in accor ance with the manufacturer’s instructions.
8. Do not install near any heat sources such as ra iators, heat registers, stoves, or other apparatus (inclu ing
amplifiers) that pro uce heat.
9. Do not efeat the safety purpose of the polarize or groun ing-type plug. A polarize plug has two bla es
with one wi er than the other. A groun ing type plug has two bla es an a thir groun ing prong. The wi e
bla e or the thir prong are provi e for your safety. If the provi e plug oes not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10. Protect the power cor from being walke on or pinche particularly at plugs, convenience receptacles, an
the point where they exit from the apparatus.
11. Only use attachments/accessories specifie by the manufacturer.
12. Use only with the cart, stan , tripo , bracket, or table specifie by the manufacturer, or sol with the apparatus.
When a cart is use , use caution when moving the cart/apparatus combination to avoi injury from tip-over.
13. Unplug this apparatus uring lightning storms or when unuse for long perio s of time.
14. Refer all servicing to qualifie service personnel. Servicing is require when the
apparatus has been amage in any way, such as power-supply cor or plug is
amage , liqui has been spille or objects have fallen into the apparatus, the
apparatus has been expose to rain or moisture, oes not operate normally, or has
been roppe .
S3125A
S3125A

PROGRAM EXCHANGER
3
PG-6104
FeaturesFeatures
Operation
Features
- PROGRAM AUTO SELECTION
Remote, Timer, EM & Signal present by matrix an one input of them is selecte automatically.
- PRIORITY ORDER
Outputs first signal an isolates late signal by priority or er feature.
- QUADRUPLEX
4 inputs & outputs for qua ruplex broa casting of school, hotel, epartment store etc.
- INDICATOR
Each in icator in icates signal type of each broa casting.
Operation
1. When power on the power istributor (PD-6359 Inter-M pro uct), the power LED of this equipment shoul be
illuminate .
2. Turn on the power of all equipments in rack system an check BGM output.
3. If system is normal, turn on remote 2 an check remote output.
4. If remote 2 are normal, operate remote 1, timer, EM by priority or er an check output by program changes.
5. If system is not working, check DC voltage an matrix connector pin.
?PGM Exchanger or er
Order Input Si nal
1Emergency Input
2Timer Input
3Remote 1 Input
4Remote 2 Input
5Pre-Amp Input

PROGRAM EXCHANGER
4PG-6104
Front Panel
Front Panel
1. EM LED
Illuminates when emergency broa casting is working.
2. TIMER LED
Illuminates when auto timer is working.
3. REMOTE 1 LED
Illuminates when remote 1 is working.
4. REMOTE 2 LED
Illuminates when remote 2 is working.
5. POWER LED
Illuminates when the power is on or power istributor’s (PD-6359) power on.

PROGRAM EXCHANGER
5
PG-6104
Rear Panel
Rear Panel
1. LINE OUTPUT JACK
Distributes each output to the main amp.
If you use unbalance, “-”an “G” have to be linke .
2. REMOTE 2 JACK
Connect to output jack 2 of remote RM-6016 (Inter-M pro uct).
3. REMOTE 1 JACK
Connect to output jack 1 of remote RM-6016 (Inter-M pro uct).
4. TIMER JACK
Connect to output jack of timer RM-6016 (Inter-M pro uct).
5. EM JACK
Connect to Emergency output jack of RM-6016 (Inter-M pro uct).
6. LINE INPUT JACK
Connect to output of pre amp or mixing consol. This jack is balance (+, –, G) an can be connecte to four
signals. If you use unbalance, “–” an “G” have to be linke .
7. EM CONNECTOR
Connect to matrix connector of EP-6216 (Inter-M pro uct).
8. MATRIX CONNECTOR
Connect to EMG jack of ECS-6216P (Inter-M pro uct).
MATRIX CONNECTOR E.M CONNECTOR
12345678

PROGRAM EXCHANGER
6PG-6104
Su estions for Rack Installation
Su estions for Rack Installation
1. Unplug or power off before installation.
2. Connect matrix connector of this equipment to EMG connector of ECS-6216P (Inter-M pro uct).
3. Connect LINE IN to pre amp’s output an LINE OUT to main amp’s input.
4. Connect EM jack of program input to output of EP-6216 (Inter-M pro uct). Timer jack to output of PW-6242A
(Inter-M pro uction), RM 1 & 2 to output of RM-6024 (Inter-M pro uct).
5. Connect EM connector to EM matrix.
? Pin number & features of matrix connector
①COM
④EM SUM
⑦RM2 SUM ②+24V
⑤TIMER SUM
⑧FIRE SUM ③+24V
⑥RM1 SUM
⑨Downloaded from www.Manualslib.com manuals search engine

PROGRAM EXCHANGER
7
PG-6104
Applications
Applications
MATRIXCONNECTOR E.M CONNECTOR
DC OUT
24V
MATR IX
120
SIREN/VOLUME
PRE IN REMOTE IN 2REMOTE IN 1TIMER IN AUTO ANN IN PRE OUT
CONTROLOUT (TO AUTO A NN)
EXT INT
AUTO.ANN
REMOTE MIC
MIC SW
EXT INT
1
2
3
4
POWER AMPX 4
PA-6324
PA-6312
PG-6104
LM-6414
ECS-6216P
PW-6242(A)
EP-6216
RM-6024 RM-6024
RM1
INPUT
AUDIO
OUT
AUDIO
OUT
RM2
INPUTLINKIN LINKOUTUPGRADESOURCE 1
RS232
SOURCE 2
EMGPANEL
/
ADDRESS
12345678910
1234567 8
91011 1213141516
12345678
91011 1213141516
TERM.
LOADOPEN
12345678
91011 1213141516
FIRE
SENSOR
SPEAKER
OUTPUT
AMP
INPUT
HEHCECEHCEHCEEHCEHCEHCHCHCHCHCHCHCHCHCHC
PDTIMER
EXT
COM
DC 24V
? The shape of outlets can be ifferent accor ing to country requirements.

PROGRAM EXCHANGER
8PG-6104
Block Dia ram
Block Dia ram

PROGRAM EXCHANGER
9
PG-6104
PG-6104
Activation Auto
Program Exchanger 5 Circuits
In icator Power LED, R.M 1 & 2 LED, Timer LED, E.M LED
Power Source 24V DC
Weight (SET) 5kg/11lb
Dimensions (SET) 482(W)x44(H)x280(D)mm/19(W)x1.7(H)x11(D)in
* Specifications an esign are subject to change without notice.
Specifications
Specifications
※ DIMENSIONS
440
482
280
44

PROGRAM EXCHANGER
10 PG-6104
Service
Service
Procedures
Take steps to insure the problem is not relate to operator error or other pro ucts within the system. Information
provi e in the troubleshooting portion of this manual may help with this process. Once it is certain that the
problem is relate to the pro uct contact your warranty provi er as escribe in the warranty section of this
manual.
Schematic
A Schematic is available by contacting your warranty provi er.
Parts List
A Parts List is available by contacting your warranty provi er.
Warranty
Warranty
Warranty terms an con itions vary by country an may not be the same for all pro ucts. Terms an con itions
of warranty for a given pro uct may be etermine first by locating the appropriate country which the pro uct
was purchase in, then by locating the pro uct type.
To obtain specific warranty information an available service locations contact Inter-M irectly or the
authorize Inter-M Distributor for your specific country or region.

NOTE

NOTE

3
PG-6104

MADE IN KOREA
June 2012
Inter-M, Lt . (Korea) began operations in 1983.
Since then, Inter-M has grown to become one of the largest manufacturers
of professional au io an commercial soun electronics equipment in the worl .
Inter-M has gaine worl wi e recognition for its own bran e pro ucts,
as well as private label manufacturing of electronics sol un er other names (OEM).
The company is no longer just a Korean company, but rather a global company
that is truly international in scope, with factories an offices in Korea an China,
an sales an marketing operations locate in Japan, Europe, an the U.S.A.
With more than 850 employees aroun the globe,
Inter-M is well-poise for further growth an expansion.
Inter-M Americas, Inc.
13875 Artesia Blv . Cerritos, CA 90703 USA
TEL : [phone], FAX : [phone]
Home Page : http://www.inter-m.net, E-mail : [email protected]
Inter-M Corporation
Seoul OFFICE:653-5 BANGHAK-DONG, DOBONG-KU, SEOUL, KOREA
TEL : [phone]~8, FAX : [phone]
Home Page : http://www.inter-m.com, E-mail : [email protected]