Intimus F-200 User manual
Folder
Operating instructions
F-200
95515 1 12/18
intimus International GmbH, Bergheimer Straße 6-12, 88677 Markdorf / Germany
…………………………………………
…………………………………………
…………………………………………
…………………………………………
…………………………………………
…………………………………………
…………………………………………
…………………………………………
……………………………………
…………………………………………
…………………………………………
…………………………………………
Thank you for using intimus folder. Please read these operating instructions
before putting the machine into operation and observe the safety precautions.
1. Safety precautions 2
2.Installation 5
3. Names and Functions 6
4. Describing Control Panel 9
5. Handling Paper 10
6. Basic Operation 11
7. Folding Operation 16
8. Correcting Folding 19
9. Troubleshooting 25
10. Maintenance and cleaning 34
11. Specification 37
12. Environmental 39
Safety precautions
Please read these operating instructions
before putting the machine into operation
and observe the safety precautions.
Children must not operate the machine!
Do not reach into the machine!
Safety precautions
2
Long hair can become entangled in cutting
head!
Take care of ties and other loose pieces of
clothing!
Remove any paper clips!
3
Safety precautions
phase socket 110 V / 10 A.
Safety precautions
4
Components which may endanger
the operator are covered!
Connect the power cord to a single
Disconnect from the mains if not
usedfor a long period.
Installation
Attach the first folding plate:
The same way with the second
folding plate.
Attach the second folding plate：
Move the lock lever of the second
folding plate to the position of
"UNLOCK".
Insert the folding plate to the
machine along the slider.
Move the lock lever to the position
of "LOCK".
Slider
Lock lever
Second folding plate
5
First folding plate
Names and Functions
1
2
3
4
5
6
7
9
10
13
6
12
8
11
NO. Name Function
1 First folding plate Guide plate for deciding a paper folding position.
First folding is made using this plate.
2 Top cover Prevents the user from touching the moving parts.
3 Control panel Used when operating the machine. Error
messages are also displayed on the LCD display.
4 Paper receiving tray Receives folded paper ejected out.
5 Stacker rollers Ejects folded paper from the machine.
6 Support paper feed plate Supports paper stacked on the paper feed table.
7 Side guide Holds paper stacked on the paper feed table.
8 Paper feed table Used to stack paper to be folded.
9 Auxiliary feed roller Corrected warping paper
10 Rubber roll Sends paper to the first folding plate.
11 Paper feed ring Feeds paper into the machine.
Names and Functions
7
NO. Name Function
12 Power switch Turns on and off the power.
13 Second folding plate Guide plate for deciding a paper folding position.
Second folding is made using this plate. This plate
is not used when folding paper into two.
Names and Functions
8
NO. Name Function
1 Counter/LCD display Counts up the number of folded paper or displays
the status of the machine.
2 Count button Enter the required number.
3 C (clear) button When the machine is stopped with paper on the
paper feed table, pressing the button for more
than two seconds makes the counted number
return to "0."
When a mis-feed has occurred, pressing this
button clears the message.
4 Stop button When pressed, the machine stops.
5 Start button When pressed, the machine starts folding
operations.
Describing Control Panel
123
45
9
Make sure that the printing ink on the
paper has dried completely prior to use.
10
Handling Paper
Do not fold curled, creased or
folded paper
Remove all paper clips.
Fan paper well prior to use.
Paper Size Long×WIde(mm) Paper Size Long×WIde(mm)
A4 297×210 B5 257×182
A5 210×148 B6 182×128
A6 148×105 B7 128× 91
Paper Size
Stacking Direction
A4 A5 A6 B5 B6 B7
○ ○ ○ ○ ○ ○
× ○ ○ × ○ ○
BASIC OPERATION
11
Standard Paper：
There are six types of standard paper sizes; A4, B5, A5, B6, A6, and B7.
Can be used as standard paper : O
Cannot be used as standard paper : X
12
There are four types of standard folding modes: single fold, double fold,
letter fold and accordion fold. Paper is folded as shown below when the
paper is placed on the paper feed table with its print side facing upward.
BASIC OPERATION
Standard Folding：
Single
fold
Double
fold
Letter
fold
Accordion
fold
Insert the power cord in the wall
socket and turn on the power.
Press “ I ” to turn on the power.
Press “O" to turn off the power.
Power switch
move the side guides to fit the
paper width.
BASIC OPERATION
Gri
p
13
Check the finish of test folding.
Check for folding misalignment
using the second test folded
sample.
If folding misalignments occur, refer
to P19.
BASIC OPERATION
After completing adjustments,
press the C (clear) button for more
than two seconds to clear the
counter to "0."
14
Enter the required number in steps
of 10 using the “ ” key.
BASIC OPERATION
Press the Start button to start
folding operations.
Press the Stop button to interrupt or
stop the operations. Pressing the
Start button again will resume
operations.
When there is no paper on the
paper feed table, the machine will
stop automatically and the counted
number and "NO PAPER" will be
displayed alternately.
When paper is loaded on the paper
feed table, only the counted
number will be displayed. If you
press the C button for more than
two seconds, the counter returns to
"0." If you press the Start button
without pressing the C button,
folding operations will resume and
the accumulated number will be
displayed on the counter.
15
FOLDING OPERATION
First folding plate adjust:
Move the knob nut of the first
folding plates to the mark of a
folding pattern you desire.
Knob nut
First folding plate
Rulers guide line
Release/ Locking
16
FOLDING OPERATION
Second plate adjust:
Move the knob unt of the second
folding plates to the mark of a
folding pattern you desire.
Knob nut
Second folding plate
17
Folding method:
Insert from this side.
Folding method:Insert from this
side.
18
Move the stacker rollers to the
appropriate position referring to the
table of stacker rollers position
attached to the control panel
section.
FOLDING OPERATION
Stacker rollers
A4 1 3 2 2
A5 2 4 3 3
Folding Style Fold Surface A Adjustment First folding plate
Fine adjustment knob
When A is longer Inward moving
Single fold
When A is shorter Outward moving
19
Correcting Folding Misalignment
along Vertical Length of Paper：
When folded paper is misaligned
along the verticallength as shown in
the figure, turn the fine adjustment
knob to correct the misalignment.
CORRECTING FOLDING
Misalignment to be corrected
Paper feeding direction
Adjusting Fine Adjustment Knob of the First Folding Plate
A
Table of contents
Other Intimus Folding Machine manuals
