Intimus CR-360 MCP Operational manual

intimus CR-360 MCP
CREASING&PERFORATING MANUAL MACHINE
Product user manual
intimus International GmbH
Bergheimer Straße 6-12
88677 Markdorf
Germany
www.intimus.com 95518 1 12/18

1
1
1. Creasing Operation Instructions
·Move the right locator to
the creasing position, then
fasten the screw.
·Insert the paper through
the creasing device and
Ensure the right edge of
the paper stay close with
the right locator.
·Press the handle to the
right till the bottom and
release the handle, then
put the creased paper out.

2
2
2. Perforating Operation Instructions
·Move the lef t locator to
the perforating position,
then fasten the screw.
·Insert the paper through
the perforating device and
Ensure the left edge of the
paper stay close with the
left locator.
·Press the handle to the
left till the bottom and
release the handle, then
put the perforated paper
out.

3. Changing Knife Cushion
·Behind the machine,
there’s a screw cap.
·Pull the perforating cushion
Out of the machine with
the screw cap, turn over
the perforating cushion,
then push the cushion
back into the machine.
4. Technical Parameter
Function/Model CR-360 MCP
Working Width 350mm
Working Thickness ＜0.35 mm
Creasing Impress Width 1.3mm
Creasing Impress Thickness 0.4mm
Perforating Impress Width 1.2mm
Perforating Impress Thickness 1.2mm
Machine Size
Machine Weight 10.5kgs
60X38.5X16cm