Invacare ProSPIN X4 User manual

1
Invacare Corporation
www.invacare.com
USA
One Invacare Way
Elyria, Ohio
44035-4190
[phone]
Canada
570 Matheson Blvd. E.
Unit 8
Mississauga, Ontario
L4Z 4G4 Canada
[phone]
© 2008
Invacare Corporation.
All rights reserved.
All trademarks are identified by
the symbols ™ and ®. All
trademarks are owned by or
licensed to Invacare Corporation
unless otherwise noted.
Spinergy is a registered
trademark of Spinergy, Inc.
Schwalbe is a registered
trademark of
RALF BOHL GmbH in
Reichshof Germany.
Specifications are
subject to change
without notification.
Form No. 05-005
Rev. 03/08
Invacare® ProSPIN™X4™Ultralightweight Custom Manual Wheelchair
ProSPIN™Specifications
Frame style Folding frame with swingaway front
Seat width 14" - 20", 22"
Seat depth 14" - 22"
Back height 10" - 20"
Adjustable-angle back 75˚-105˚ (in 5˚ increments)
Camber angles 0˚, 3˚, 6˚
Tubing outside diameter 1"
Weight of chair 15 lb.**, 30 lb.***
Weight capacity 250 lb., 350 lb. (Heavy-Duty option)
Limited warranty Limited lifetime on frame and crossbraces
** Base chair weight without accessories.
***
16" x 16", AT99, BH20, BRG2, BLUM2, SPCR1, WLPLL, SPIN24, PRIMO, 70STAPER,1651, HLOOP,
IMPACTG, BACK1216, SLIPBACK, 1671LG, ALUMPC, A1577.
Knee-to-heel*
Folding frames w/ seat rails
Front rigging type min max
60˚ 14.00 " 19.00"
70˚ 14.00" 19.00"
70˚ Tapered 14.50 " 19.50 "
* Range adjusts in 1" increments. Measurement taken from top of seat rail to back of footrest.
Knee-to-heel (Fixed frame)*
Front rigging type min max
Adjustable angle flip-up 14.00 " 18.00"
1 pc. tubular flip-up 14.00" 18.00"
* Range adjusts in 1/4" increments. Measurement taken from top of seat rail to back
of footrest.
Arm heights*
AT99* 8" - 10"
CAD* 10" - 14"
CAF* 10" - 14"
TAD** 6" - 10"
TAF** 8" - 14"
* Range adjusts in 1" increments. **Range adjusts in 0.5" increments.
All measurements from top of seat rail to top of armrest. On AT99, add 1" for upholstered arm
pads. For less-seat-rail chairs, add 1.5" to above measurements (top of upper frame rail to top of
armrest.)
Rear seat-to-floor heights
13.5" - 18" 20 Com, 20SP
14.5" - 19" 22 Com, 22SP
15.5" - 20" 24 Com7, 24SP, 24HSP, 24SPIN
16.5" - 20.5" 25SPIN, 559TS, 26SP, 26HSP, 26SPIN
Front Seat-to-floor heights*
Spacer 3" 4" 5" 6"
Fork 5SOFT
AT901 AT902 AT902
AT900 4ALUM2 5ALUM2 6ALUM2
SPCR0 15.50"
BRG1 15 .50 "16 .00 " 16.50"
16.00" 16.50" 17.00" 17.50"
SPCR1 16.50"
16.50" 17.00" 17.50"
17.00" 17.50" 18.00" 18.50"
SPCR2 17.50"
17.50" 18.00" 18.50"
18.00" 18.50" 19.00" 19.50"
SPCR0 17.50" 18.00" 18.50"
BRG2 17.50" 18.00" 18.50" 19.00"
18.00" 18.50" 19.00" 19.50"
SPCR1 18.50" 19.00" 19.50"
18.50" 19.00" 19.50" 20.00"
19.00" 19.50" 20.00" 20.50"
SPCR2 19.50" 20.00" 20.50"
19.50" 20.00" 20.50" 21.00"
20.00" 20.50" 21.00" 21.50"
SPCR0 16.50"
SOFR-F 16.50" 17.00" 17.50"
17.00" 17.50" 18.00" 18.50"
SPCR1 17.50"
17.50" 18.00" 18.50"
18.00" 18.50" 19.00" 19.50"
SPCR2 n/a n/a n/a n/a
Invacare® ProSPIN™X4™Ultralightweight Custom Manual Wheelchair
Invacare® ProSPIN™X4™ Ultralightweight Custom Manual Wheelchair
* ANSI/RESNA W/C 19 sec 6.2 Presale Literature Notification
ProSPIN X4 Swing-away
Minimum turning radius 19.5" Minimum turn-around width 36" (16W x 17D without
footrests) ProSPIN X4 20" or deeper may be longer than 1220 mm, exceeding the ADA
definition of common wheelchair and the maximum length requirements of lifts on
public vehicles, and may therefore present particular difficulties accessing some
vehicles. Total wheelchair mass = 45 lb. (20.5kg) – including front riggings, 24COM7
with PNEUFF, Tie-down brackets, T-arms, 6" Casters, Wheellocks, Seat cushion, and
wheelchair-anchored pelvic belt. Average lateral dummy displacement = approximately
0.77" (19.6mm).
Overall Score = 13 Overall Rating = B
The ProSPIN X4 tested was sized to accommodate a 170 lb. test dummy (16W x 17D,
60 degree front rigging, 24" composite wheels, 24" Flat free pneumatic tires, seat
cushion, sling back, 6" urethane casters). The ProSPIN X4 tested was tied-down using
four tie-down brackets – 2 brackets located near the front of the frame and 2 brackets
located on the rear of base frame. The ProSPIN X4 was tested with a 170 lb. test
dummy.
The ProSPIN X4 tested used a wheelchair-anchored pelvic belt and vehicle-anchored
shoulder belt. The ProSPIN X4 tested complies with the performance requirements of
ANSI/RESNA W/C 19 sec 5.3. for all types of vehicles, the ProSPIN X4 requires four
SAE J2249 - compliant tie-down strap assemblies for effective securement.
When the TRRO option is selected, the ProSPIN X4 provides a location for anchoring of
an Invacare-provided pelvic belt. This belt has been tested in accordance with
ANSI/RESNA W/C 19.The wheelchair-anchored pelvic belt is supplied by Invacare.

A new curved handle wheel lock
adds to the functionality. (not shown)
TRRO* available: Front and rear
tie-down brackets attached to the
frame. (not shown)
The axleplate can be flipped 180˚
for plenty of center-of-gravity and
seat-to-floor combinations.
New swing-in/swing-out front
riggings help make transfers easier.
The ProSPIN X4 takes the look, feel and performance of a folding
wheelchair into the new century. From any angle, the X4 appeals to the
visual sense like no other wheelchair.
The unique side frame and axle plate design merge aesthetics and
performance. The X4 side frame minimizes both welded and bolt-on
connections, strengthening the frame and lessening the amount of
propulsion energy lost through flex and vibration. The curved axle plate
completes the flowing side view, making the X4 look more like a work of
art than a wheelchair.
In the front of the frame, the head tube design allows consumers to get
closer to desks or other furniture. The caster is positioned closer to the drive
wheel for quickened response during propulsion, and less caster
interference with foot placement and maneuverability. The sleek design of
the curved wheel lock handle makes it easy to engage and helps maintain a
low profile for less interference with propulsion and transfers. Finally, the
front capped H-blocks help rigidify the frame by holding the seat rails firmly
in place. This greatly reduces the flex associated with many folding-frame
wheelchairs.
The ProSPIN X4 is available in a variety of color options. Choose
from Contemporary, Too Hot or Way Cool colors.
The X4 caster head tube adjustment
is accessible and simple to change.
A front capped H-block helps rigidize
the frame by holding the seat rails
in place.
In just a few short years, the ProSPIN®X4™has become the
benchmark for ultralight folding wheelchair excellence. When we
created the ProSPIN we did so organically, without any platform or
chassis to conform to, using what you told us was missing in
ultralight folding wheelchairs. It’s already proven to be one of the,
if not the, most durably made yet memorably designed wheelchairs
in the industry.
We haven’t stopped with what we started, however, as we
continue to introduce modern enhancements and highly functional
accessory improvements with a commitment to long-lasting,
quality products always paramount. Take a look at what’s new
with the ProSPIN X4.
New elevating leg rest designed to
provide ample adjustability.
(not shown)
The level of design detail in the available options and accessories further
complements the ProSPIN X4 aesthetics. The swing-in/swing-out front
riggings allow consumers to swingaway the footrests either to the outside
or underneath the wheelchair. This allows easier transfers from the
wheelchair into an automobile seat or office chair without having to back
up the wheelchair.
The curved axle plate not only looks awesome, it also is incredibly
functional, providing plenty of center-of-gravity options and seat-to-floor
heights. The axle plate can be moved along the frame in 1/2" increments
and has slotted holes to allow for more center-of-gravity adjustments. If
that isn’t enough, the entire bracket can be flipped 180˚ to ensure that the
X4 can be configured for optimal stability and performance. An adjustable-
angle back option also is available allowing up to 15˚ of either posterior or
anterior adjustment.
With Invacare’s own Smart Adjustability™, making adjustments on the
fly is surprisingly quick and simple. The adjustable front head tubes allow
changes to the front caster angle as needed, without having to remove
the front caster wheel. The X4 wheel locks switch in seconds from
push-to-lock to pull-to-lock.
The ProSPIN X4 was designed to be one of the lightest-weight folding
wheelchairs available while also improving the durability needed to
endure many years of folding and unfolding. The improved crossbraces
allow for a tight, compact fold so the X4 can be easily transported in the
back seat or trunk of most vehicles.
Extremely Lightweight
Future Forward Design and Breathtaking Responsiveness
Fixed Front Frame Version.
With adjustable angle flip-up footplate
Invacare®ProSPIN™X4™Ultralightweight Custom Manual Wheelchair
Locked position
Unlocked position 360˚ rotation
Invacare® ProSPIN™X4™Ultralightweight Custom Manual Wheelchair
Detailed Perfection and Smart Adjustability™
* This wheelchair conforms to the requirements of ANRI/RESNA WC/19
vol. 1 - section 19.5.3 (Frontal Impact Test). Please refer to the back page of
this sell sheet for the ANSI/RESNA WC/19 sec. 6.2 Presale Literature
Notification. Invacare recommends that wheelchair users NOT be transported
in vehicles of any kind while in wheelchairs. As of this date, the U.S.
Department of Transportation has not approved any tie-down system for
transportation of a user while in a wheelchair in a moving vehicle of any type.
It is Invacare’s position that users of wheelchairs should be transferred into
appropriate seating in vehicles for transportation and use be made of the
restraints made available by the auto industry.
™
™
New Enhancements
*Rigid front end frame w/ locking flip-up footplate
*Heavy-Duty package up to 350 pounds
*Designed from scratch elevating leg rests
*Amputee axle plate option
*Bold black anodized accent package
*Schwalbe®tires