IPC CT80 User manual

(IT) MANUALE ISTRUZIONI PER L’USO /
(EN) OPERATOR’S MANUAL / (FR) MANUEL D’INSTRUCTIONS /
(DE) BEDIENUNGSANLEITUNG / (ES) MANUAL DE INSTRUCCIONES /
(NO) BRUKERHÅNDBOK / (NL) GEBRUIKERSHANDLEIDING /
(PT) MANUAL DE UTILIZAÇÃO / (SE) INSTRUKTIONSBOK /
(RU) РУКОВОДСТВО ОПЕРАТОРА /
(BG) РЪКОВОДСТВО ЗА ЕКСПЛОАТАЦИЯ /
(TR) KULLANIM KILAVUZU / (CN) 操作手册 /
(HU) HASZNÁLATI ÚTMUTATÓ / (PL) PODRĘCZNIK OPERATORA /
(SL) PRIROČNIK Z NAVODILI ZA UPORABO /
(CZ) NÁVOD PRO OBSLUHU / (HR) PRIRUČNIK ZA KORIŠTENJE /
(RO) MANUAL DE UTILIZARE
Consultare attentamente questo manuale prima di procedere a qualsiasi intervento sulla macchina
Read this manual carefully before carrying out any work on the machine
Lire attentivement ce manuel avant toute intervention sur la machine
Vorliegendes Handbuch vor jedem Eingri󰀨 an der Maschine aufmerksam durchlesen
Consulte detenidamente este manual antes de llevar a cabo cualquier trabajo en la máquina
Konsulter denne håndboken nøye før du går i gang med noen som helst type inngrep på maskinen
Raadpleeg deze handleiding aandachtig alvorens met enige werkzaamheid aan de machine te beginnen
Consulte atentamente este manual antes de efectuar qualquer intervenção na máquina
Läs noggrant igenom denna handbok innan du utför något som helst ingrepp på maskinen
Прочетете внимателно това ръководство, преди да започнете работа с машината
Внимательно ознакомьтесь с данной инструкцией до проведения любой работы с машиной
Makine ile herhangi bir işlem yapmadan önce bu kılavuzu dikkatle okuyun
操作机器之前请认真阅读本手册
A géppel történő munkavégzést megelőzően gyelmesen olvassa el ezt az útmutatót
Przed rozpoczęciem pracy z urządzeniem należy uważnie przeczytać niniejszy podręcznik
Pozorno preberite to navodilo za uporabo, preden se lotite kakršnega koli poseganja v stroj
Před jakoukoli manipulací se strojem si nejdříve pozorně přečtěte tento návod.
Pažljivo pročitajte ovaj priručnik prije izvođenja bilo kakvih radnji na uređaju.
Citiți cu atenție acest manual înainte de a efectua orice operațiuni asupra mașinii
CT80 - CT81 - PT80 - LAVAMATIC 80

GB
ENGLISH
(Translation of original
instructions)
2

TECHNICAL SPECIFICATIONS.............................................................................4
MACHINE DIMENSIONS........................................................................................6
SAFETY SYMBOLS................................................................................................7
GENERAL INFORMATION.....................................................................................8
Purpose of this manual .................................................................................................................. 8
Identifying the machine ..................................................................................................................8
Documentation provided with the machine .................................................................................... 8
TECHNICAL INFORMATION..................................................................................9
General description ........................................................................................................................ 9
Parts of the machine ......................................................................................................................9
Danger zones ................................................................................................................................10
Accessories ...................................................................................................................................10
SAFETY INFORMATION .......................................................................................11
Safety precautions ........................................................................................................................ 11
MOVEMENT INSTALLATION...............................................................................14
Lifting and transporting the packaged machine ............................................................................ 14
Delivery checks ............................................................................................................................. 14
Unpacking .....................................................................................................................................14
Batteries (Battery version)............................................................................................................. 14
Batteries: preparation ....................................................................................................................15
Batteries: installation and connection............................................................................................ 15
Batteries: removal .........................................................................................................................16
Choosing a battery charger ...........................................................................................................16
Preparing the battery charger ...................................................................................................... 16
Squeegee installation and adjustment ..........................................................................................17
Squeegee adjustment ...................................................................................................................17
Brush installation ...........................................................................................................................18
Lifting and transporting the machine ............................................................................................. 19
PRACTICAL GUIDE FOR THE OPERATOR.........................................................20
Preparing the machine for work .................................................................................................... 20
Controls .........................................................................................................................................21
Working ......................................................................................................................................... 24
Some useful tips to get the most from your scrubber drier ........................................................... 24
Emptying the collection tank: ........................................................................................................ 24
Emptying the water/detergent tank ............................................................................................... 25
Filling the water/detergent tank ..................................................................................................... 25
Filling the Chem-Dose tank (accessory) ....................................................................................... 26
Finishing work ...............................................................................................................................26
Moving the machine when not in operation................................................................................... 26
PERIODS OF INACTIVITY ....................................................................................27
MAINTENANCE INSTRUCTIONS.........................................................................28
Maintenance - General rules .........................................................................................................28
Cleaning the suction motor air lter............................................................................................... 28
Cleaning the water/detergent tank lter ........................................................................................ 29
Cleaning the dirty water tank oat ................................................................................................. 29
Fuses: replacing ............................................................................................................................ 30
Battery maintenance and charging ............................................................................................... 32
Replacing the squeegee blades .................................................................................................... 33
Pushing and pulling the machine: .................................................................................................34
Periodic checks ............................................................................................................................. 35
TROUBLESHOOTING...........................................................................................36
DISPLAY ALARMS ................................................................................................37
TECHNICAL MENU ...............................................................................................39

GB
TECHNICAL SPECIFICATIONS
55 60 70
Cleaning width
mm 530 614 678
inch 21 24 28
Squeegee width
mm 710 942
inch 28 37
Cleaning capacity per hour
m2/h 3180 3684 4068
ft2/h 34229 39654 43787
Number of brushes n° 1 2
Brush diameter
mm 530 310 345
inch 21 13 14
Maximum brush pressure
g/cm210,3 62,6 43,7
kPa 0,98 6,8 4,3
Brush rotation speed g/1°
RPM 150 220
Brush motor power
W 400 2 x 400
HP 0,53 2 x 0,53
Drive motor power
W 300
HP 0,4
Maximum speed
Km/h 6
mph 3,7
Suction motor power
W 480 (2 stadi) 480 (3 stadi)
HP 0,64 0,64
Solution tank
L 75
gal 20
Dirty water tank
L 80
gal 21
Rear wheel diameter
mm 225
inch 8,8
Maximum slope % 8 16
4

GB
Gross weight
Kg 418 430 431
lbs 921,5 947,9 950
Transported weight
Kg 293 293 293
lbs 645,9 645,9 645,9
Number of batteries n° 2 4
Battery voltage V 12 6
Individual battery capacity Ah (5h) 105 180
Power system voltage V 24
Machine dimensions
mm X=1310
Z=673
Y=1030
X=1310
Z=675
Y=1030
X=1310
Z=760
Y=1030
inch
X=51,5
Z=26,4
Y=40,5
X=51,5
Z=26,5
Y=40,5
X=51,5
Z=29,9
Y=40,5
Battery compartment dimensions
(length, width, height)
mm 390x478x260
inch 15,3x18,8x10,2
Packed size (length, width, height)
mm 1445x795x1140
inch 56,8x31,2x44,8
Sound pressure LpA
(dB) 67 69 69
Measurement uncertainty K
(dB) 3,2 3,2 3,2
Vibration level (hand) HAV
m/sec2 1,5 1,3 1,3
Measurement uncertainty, k m/sec2 0,8 0,6 0,6
Vibration level (body) HBV
m/sec2 0,6 0,6 0,6
Measurement uncertainty, k m/sec2 0,3 0,3 0,3
Maximum water and detergent
temperature °C da 4 a 55
Data subject to variation without warning.
5

GB
X-Y-Z: See “TECHNICAL SPECIFICATIONS” table
MACHINE DIMENSIONS
6

GB
SAFETY SYMBOLS
WARNING! RISK OF CUTTING
WARNING! RISK OF CRUSHING LIMBS
WARNING! RISK OF ABRASION
WARNING! RISK OF ENTANGLEMENT
WARNING! RISK OF ACID BURNS
WARNING! RISK OF BURNS
MAXIMUM SLOPE
OPERATOR’S MANUAL, OPERATING INSTRUCTIONS
READ THE OPERATOR’S MANUAL
DIRECT CURRENT SYMBOL
INSULATION CLASS, THIS CLASSIFICATION ONLY AP-
PLIES TO MACHINES POWERED BY BATTERIES.
7

GB
GENERAL INFORMATION
Purpose of this manual
This manual has been written by the Manufacturer and is an integral part of the machine1.
It denes the purpose for which the machine has been designed and constructed and contains all
the information required by operators2.
In addition to this manual, which contains information for operators, other publications are available
providing specic information for maintenance personnel3.
The terms “right” and “left”, “clockwise” and “anti-clockwise” refer to the forward movement of the
machine.
Constant compliance with the instructions provided in this manual guarantees the safety of the op-
erator and the machine, ensures low running costs and high quality results and extends the working
life of the machine. Failure to follow these instructions may lead to injury to the operator or damage
to the machine, oor and environment.
Consult the table of contents at the beginning of the manual to nd the section you need rapidly.
Parts of the text requiring special attention are printed in bold and preceded by the symbols illus-
trated and described here. ! DANGER!
Indicates the need for attention in order to avoid a series of consequences which could
cause death or serious injury to personnel.
! WARNING!
Indicates the need for attention in order to avoid a series of consequences which could
cause injury to personnel or damage to the machine or work environment or nancial loss.
! IMPORTANT!
Important information.
In line with the company’s policy of constant product development and updating, the Manu-
facturer reserves the right to make modications without prior notice.
Although your machine may di󰀨er appreciably from the illustrations in this document, the
correctness and validity of the instructions contained in this manual are guaranteed.
Identifying the machine
The nameplate provides the following information:
► Model
►Battery voltage
►Total rated power
►Rated current draw
►Serial number
►Year of manufacture
► IP Index of Protection
►Dry weight
► Maximum negotiable gradient
►Name of manufacturer
Documentation provided with the machine
►Operator’s manual
► Certicate of warranty
► CE certicate of conformity
1 The denition "machine" replaces the trade name covered by this manual.
2 Persons responsible for using the machine without performing any operations requiring precise technical skills.
3 Persons with experience, technical training and a knowledge of legislation and standards, able to perform all the
necessary operations and to recognise and avoid possible risks in handling, installation, use and maintenance of this
machine.
Model :
Vac :
W :
A :
Hz :
Ser.N :
Date :
IP :
Kg :
8

GB
TECHNICAL INFORMATION
General description
This machine is a scrubber drier for sweeping, washing and drying at, horizontal, smooth or mod-
erately rough, even and obstacle free oors in civil and industrial premises.
The scrubber drier spreads a solution of water and detergent in the correct concentration on the
oor and then scrubs it to remove the dirt. By carefully choosing the detergent and brushes (or
abrasive disks) from the wide range of accessories available, the machine can be adapted to a wide
range of combinations of types of oor and dirt.
A suction system incorporated in the machine dries the oor after washing by means of the low
pressure generated in the dirty water tank by the suction motor. The squeegee connected to the
tank collects the dirty water.
Parts of the machine
The machine comprises the main parts described below (g. 1).
► The water/detergent tank (g. 1, ref. 1) contains and carries the mixture of clean water and
cleaning product.
► The dirty water tank (g. 1, ref. 2) collects the dirty water picked up from the oor after
washing;
► Control panel (g. 1, ref. 3).
► Head assembly (g. 1, ref. 4), the main element comprises the brushes/rollers which dis-
tribute the detergent solution onto the oor and remove the dirt.
► Squeegee assembly (g. 1, ref. 5): wipes and dries the oor by collecting the water.
1
4
3
2
5
1
9

GB
Danger zones
► Control panel: risk of injury from short circuits.
► Tank assembly: when using certain detergents, danger of irritation for eyes, skin, mucous
membranes and respiratory tract and of asphyxia. Danger represented by the dirt collected
from the environment (germs and chemical substances). Danger of crushing between the
two tanks when the dirty water tank is replaced on top of the detergent tank.
► Washing head assembly: danger due to brush rotation.
► Front/rear wheels: risk of crushing between the wheels and chassis.
►Danger of short circuit between the battery poles and presence of hydrogen during charg-
ing.
Accessories
► Soft, hard and abrasive brushes.
► Chem-Dose tank.
► NORD ELETTRONICA NE284 battery charger for single-brush version
► S.P.E. CBHD3 battery charger for double-brush version
10