Ipevo Uplift Magnetic Multi-angle Arm User manual

0---....
,,
,
I
I Centered
I
I
\ \ ' ....___
-------- ...,
------ I
---------------------------------------------------------------
;-
'
, ____
---------------------------------------------------------------------------
IPEVO Uplift Magnetic
Multi-angle Arm
for iPhone 12 series and above
Quick Start Guide
Copyright© 2022 IPEVO Corp. All rights reserved
Customer Service
Email: [e-mail]
Tel: [phone] (USA)
What is Uplift Magnetic
Uplift Magnetic is a multifunctional phone stand that increases comfort and effectivity during video
calls, touchscreen operation, video recording and presentations. Its magnetic holder allows easy
phone attachment and removal, which lets Uplift become a natural part of any workplace setup.
What types of smartphones can be used with Uplift
iPhone 12 and above: Other smartphones:
Simply attach your phone to the magnetic A permanent adhesive magnetic circle is
holder. included with Uplift. It can be placed to the
center of the back side of your phone's case.
•
•
•
Adhesive magnetic circle
The adhesive magnetic circle is non-removable. Hence it is recommended to stick it on
the protective case of the smartphone.
Please note that if placed directly onto the smartphone, the magnetic circle will prevent
wireless charging. To avoid this, please place it on your phone's protective case.
The adhesive magnetic circle is not meant to be used with iPhone 12 series and above.

The multi-angle arm
The whole smartphone holder can be rotated 360°. This allows users to display their work from the
ideal angle and to switch the image orientation anytime they need to. This is most commonly
utilized during video calls when switching between displaying one's materials and one's face.
To capture a wider area, you can increase the distance between the camera lens and your desk by
moving the Uplift’s arm into a more upright position.
Carry-weight limit of Uplift and its magnetic holder
Uplift can support devices of weight up to 0.66 lbs (300g). When using Uplift as a document camera,
ie. the smartphone’s camera is aiming downwards, it is recommended to have the joint number 2
positioned at a 90° angle relative to the base.
If you choose to use a device that exceeds the maximum supported weight, you may need to add
extra weight onto the base. In such a case, please note that the carry-weight limit of the magnetic
holder is 1.3 lbs (600g).
Uplift allows one-hand operation when its arm is partially folded. To remove your phone, please tilt it in one direction, until it is
released from the magnetic holder.