iRay Technology Geni Series User manual

InfiRay Outdoor •Geni GL35R Series •Quick Start Guide www.infirayouordoor.com
All rights reserved and shall not be copied and distributed in any form without written permission
IMPORTANT SAFETY INFORMATION
Environmental influences
Note: Never point the lens of the device directly at intense heat sources
such as the sun or laser equipment. The objective lens and eyepiece can
function as a burning glass and damage the interior components.
Risk of swallowing
Caution: Do not place this device in the hands of small children. Incorrect
handling can cause small parts to come loose which may be swallowed.
Safety instructions for use
-Do not expose the device to fire or high temperatures.
-The battery capacity decreases when operated in a cold ambient
temperature. This is not a fault and occurs for technical reasons.
-Always store the device in its carrying bag in a dry, well-ventilated
space. For prolonged storage, remove the batteries.
-Do not expose your device to extreme temperatures lower than - 20°C
and higher than + 50°C.
-The product shall only be connected to a USB Type C interface.
-If the device has been damaged or the battery is defective, send the
device to our after-sales service for repair.
User information on the disposal of electrical and electronic devices
(private households)
The WEEE symbol on products and/or
accompanying documents indicates that used
electrical and electronic products must not be mixed
with ordinary household waste. For proper treatment,
recovery and recycling, take these products to the
appropriate collection points where they will be
accepted without charge. In some countries, it may
also be possible to return these products to your local retailer when you
purchase a corresponding new product. The proper disposal of this
product serves to protect the environment and prevents possible harmful
effects on human beings and their surroundings, which may arise as a
result of incorrect handling of waste.
More detailed information on your nearest collection point is available
from your local authority. In accordance with state legislation, penalties
may be imposed for the improper disposal of this type of waste.
For business customers within the European Union
Please contact your dealer or supplier regarding the disposal of electrical
and electronic devices. He will provide you with further information.
Information on disposal in other countries outside of the European
Union

InfiRay Outdoor •Geni GL35R Series •Quick Start Guide www.infirayouordoor.com
All rights reserved and shall not be copied and distributed in any form without written permission
This symbol is only applicable in the European Union. Please contact
your local authority or dealer if you wish to dispose of this product and ask
for a disposal option.
Intended use
The device is intended for displaying heat signatures during nature
observation, remote hunting observations and for civil use. This device is
not a toy for children.
Use the device only as described in this instruction manual. The
manufacturer and the dealer accept no liability for damages which arise
due to non-intended or incorrect use.
Function test
-Before use, please ensure that your device has no visible damage.
-Test to see if the device displays a clear, undisturbed image.
-Check that the settings for the thermal imaging camera are correct. See
the notes in the section Observation mode.
Installing/removing the battery
The Geni thermal imaging scope need to install one 26650 battery for use.
Refer to the section Battery Installation for details.
Observation with and without glasses
Thanks to the flexible eyeshade, the Geni series can be used with or
without glasses. It offers a full field of view in both cases.

InfiRay Outdoor •Geni GL35R Series •Quick Start Guide www.infirayouordoor.com
All rights reserved and shall not be copied and distributed in any form without written permission
1 Specification
Model
Geni GL35R
Microbolometer
Resolution, pixels
384 ×288
Pixel size, μm
12
NETD, mk
≤40
Frame rate, Hz
50
Optical Characteristics
Objective lens, mm
35
Field of view
7.5°×5.7°
Magnification, x
2.81 - 11.24
E-zoom, x
1 / 2 / 3 / 4
Diopter Adjustment, D
-5 ~ +5
Detective range, m
(Target size:1.7m*0.5m, P(n)=99%)
1818
Display
Display type
OLED
Resolution, pixels
1024 ×768
Power Supply
Battery type
26650 ×1
External Power Supply
5V (Type C USB)
Max. Operation time (at t=22℃), h★
7
Operational Characteristics
Max. Recoil Power on Rifled
Weapon, g/s²
1000
Degree of protection, IP code
IP67
Amount of built-in memory, Gb
32
Operating Temperature Range, ℃
-10 ~ +50
Weight (without batteries), g
< 600
Dimension, mm
225 ×100 ×61.5
Rangefinder Characteristics
Wavelength, nm
905
Max. Measuring Range, m/y★★
1000
Measurement Accuracy, m
±1
★The actual operating time depends on the intensity of using Wi-Fi,
video recorder.
★★ The measuring range depends on the characteristics of the object
under observation and environmental conditions.
➢Improvements may be made to the design and software of this product
to enhance its useful features.
➢Technical parameters of the device may be improved without prior
notice of the customer.

InfiRay Outdoor •Geni GL35R Series •Quick Start Guide www.infirayouordoor.com
All rights reserved and shall not be copied and distributed in any form without written permission
2Package Contents
➢GL35R Thermal Imaging Scopes
➢IRM-030-205-Q1 picatinny mount
➢A L-shaped wrench
➢M5 screw ×4 pcs
➢Portable bag
➢Lens cloth
➢Heated target for zeroing ×5pcs
3Description
The Geni series GL35R is an infrared thermal imaging scope with a
built-in laser rangefinder. It can be installed on various types of firearms
for night hunting. It is light in weight, small in size, and easy to carry, and
features a long working time, good concealment, and strong penetration
of thick smoke, dust, or night.
4Components and Controls
1. Eyeshade
2. Eyepiece diopter
adjusting ring
3. Camera (C) button
4. Menu (M) button
5. Zoom (Z) button
6. Power (P) button
7. Battery compartment
8. Type C port
9. Lens focus ring
10.Lens cover
11.Laser rangefinder
12.Objective lens

InfiRay Outdoor •Geni GL35R Series •Quick Start Guide www.infirayouordoor.com
All rights reserved and shall not be copied and distributed in any form without written permission
5Icons Instructions
Image mode: White hot
Motion sensor
Image mode: Black hot
Microphone
Image mode: Red hot
Image hue
Image mode: Color
Zeroing type
Display brightness
More
/ / /
E-zoom
Zeroing
Image sharpness
Defective pixels calibration
Image brightness
Compass calibration
Image contrast
Laser rangefinder calibration
Ultraclear mode
Time setting
Wi-Fi
System information
Auto correction mode
Factory reset
Video out
Return to the Main Menu
PIP
Battery indicator
Digital compass
USB icon

InfiRay Outdoor •Geni GL35R Series •Quick Start Guide www.infirayouordoor.com
All rights reserved and shall not be copied and distributed in any form without written permission
6Description of Controls
Button
Status / Current Operation Mode
Short Press
Long Press
P (Power) Button
Device is off
——
Power on the device
Device is on
Turn the standby mode on/off
Power off the device
Rangefinder Mode
Exit and return to the home screen
——
Menu and function interface
Exit to the upper interface without saving
——
Z (Zoom) Button
Home Screen
Digital Zoom
Enter the rangefinder mode
Main menu / Shortcut menu interface
Navigation upwards
——
Single rangefinder Mode
Distance measurement
Switch rangefinder mode
M (Menu) Button
Home screen
Enter the shortcut menu
Enter the main menu
Shortcut menu
Switch to the next page of the shortcut menu
——
Main menu
Enter the submenu / Confirm selection
Save and exit to the upper interface
Defective pixel calibration
Switch the moving direction
C (Camera) Button
Home screen
Take a Photograph
Start video recording
Main menu / shortcut menu
Navigation downwards
——
Video recording
Take a Photograph
Stop and save video
M + C Buttons
Home screen
Shutter correction
Background correction
Z + M + C Buttons
Home screen
Switch the units between cm/m and inch/yard
——

InfiRay Outdoor •Geni GL35R Series •Quick Start Guide www.infirayouordoor.com
All rights reserved and shall not be copied and distributed in any form without written permission
7Battery Installation
➢Open the battery cover (7) anticlockwise according to the prompt
identification on the device.
➢Place one 26650 battery (13)correctly according to the polarity labels
in the battery compartment.
➢When done, screw tightly the battery cover (7) clockwise.
Attention
-Please use batteries provided by formal manufacturers.
-Geni series can also be connected to an external power supply through
the Type-C data cable. In this case, the USB icon is displayed
on the upper right of the screen.
8Operation
➢Open the lens cover (10).
➢Press and hold down the Z (5) button for 3s to power on the device.
Waite for 6s until thermal image appears on the display.
➢Diopter Adjustment: Adjust the sharp resolution of the icons on the
display by rotating the diopter adjusting ring (2) of the eyepiece.
➢Lens Focus Adjustment: rotate the lens focus ring (9) to focus on the
object being observed.
➢Calibration: in the home screen, calibrate the image with a short press
of the M (4) + C (3) buttons for shutter calibration or long press the M (4)
and C (3) button for background calibration.

InfiRay Outdoor •Geni GL35R Series •Quick Start Guide www.infirayouordoor.com
All rights reserved and shall not be copied and distributed in any form without written permission
➢Image Settings: adjust the image mode, display brightness, digital
zoom, image sharpness, image brightness, image contrast in the
shortcut menu (for more details, see the Shortcut Menu section).
➢Standby Mode: Briefly press the P (6) button to turn the standby mode
on/off. The standby mode can
➢Power off: to power off the device, long press P (6) button for 5s until
the shutdown option menu
appears. Make your selection
to switch “√” or “×”with a
short press of the Z (5) / C (3)
button and confirm your
selection with the M (4)
button. Select the “√” to shut down and “×”to cancel.
➢Reticle On: click the M (4) button four times in a row while pressing
and holding the Z (5) + C (3) button to invoke the reticle function for the
first time use, then long press the Z (5) + M (4) + C (3) button
simultaneously for 7 seconds to turn the reticle on. This function should
be activated when the reticle first enabled.
Attention
➢When the reticle is turned off, all the operations related to it in the menu
will be hidden, including the adjustment of the reticle color and pattern
(in the shortcut menu), the options of zeroing and blind pixel correction
in the main menu.
9Zeroing
Zeroing is recommended to be done at the temperature close to the
scope operating temperature.
Before implementing zeroing setting, please make sure that the reticle is
on and zeroing type is selected in the main menu.
➢Mount the scope on your weapon.
➢Set a target at 100m distance, and power on the scope.
➢For the first use of the scope, please make sure that the reticle is on
before zeroing (refer to the instructions of section 6 Operation).
➢Long press the M (4) button on the home screen to enter the main
menu.

InfiRay Outdoor •Geni GL35R Series •Quick Start Guide www.infirayouordoor.com
All rights reserved and shall not be copied and distributed in any form without written permission
➢Select one zeroing type in the main menu (refer to the Main Menu –
Zeroing Type).
➢Select the Zeroing item in the sunmenu of the MORE item, and press
the M (4) button to enter the Zeroing interface. In the Zeroing interface,
the reticle is shown as a small cross for position adjustment.
➢Then aiming the center of the reticle at the bull’s-eye 100 meters away
and shooting.
➢After firing, observe the actual point of impact.
➢If the bullet hole can be seen on the display of the thermal scope:
⚫While keeping the position
of the device fixed, press
and hold the M (4) and C (3)
button at the same time to
freeze the image, and a
snowflake icon will
appear on the upper-left corner of the screen.
⚫Move the reticle to the position of the actual impact point by the Z
(5) / C (3) button.
⚫Short press the M (4) button to switch the movement direction
between UP-DOWN and RIGHT-LEFT.
⚫After moving the reticle to the bullet hole, press and hold down the
M (4) button to save the position and exit.
➢If the bullet hole cannot be seen on the display of the thermal
scope:
⚫Keep the position of the device fixed, and measure the horizontal
and vertical distance between the bull’s eye and the bullet hole.
⚫According to the measured distance, move the reticle position by
long or short pressing the Z (5) / C (3) button until the distance
marked on the scale plate consistent with the measured distance.
⚫Short press the M (4) button to switch the movement direction
between UP-DOWN and RIGHT-LEFT.
⚫Press and hold down the M (4) button to save and exit when the
process is done.
Notes
-To ensure the accuracy of the position, aiming the bull’s-eye again and
repeat the operations until the bull’s-eye is hit.
-In the zeroing interface, the reticle moves one pixel with a short press of
the Z (5) / C (3) button to the corresponding direction while ten pixels