Iron King S-1.8M User manual

PORTABLE
SQUAT STAND
S-1.
8M
#trainincolour

PRODUCT SPECIFICATIONS-1.8M
MAX TRAINING WEIGHT
PRODUCT WEIGHT
DIMENSIONS
PRODUCT FOOTPRINT
400KG
80KG
(180CM x 60CM x 50CM) x 2
60CM x 170CM
1
WARNING
TO AVOID POSSIBLE HARM, READ AND FOLLOW
THIS ADVICE AND THE FOLLOWING INSTRUCTIONS.
MISUSE OF THE EQUIPMENT OR INCORRECT
ASSEMBLY MAY RESULT IN SERIOUS OR FATAL INJURY.
ENSURE THAT ALL PARTS ARE UNDAMAGED
AND IN WORKING ORDER BEFORE
ATTEMPTING TO USE THE PRODUCT.
ENSURE NUTS AND BOLTS ARE TIGHT AND
THAT ALL PARTS ARE PLUMB BEFORE USE.
WE RECOMMEND A MINIMUM OF 2 PEOPLE
FOR SAFE ASSEMBLY OF THE PRODUCT.
WEAR APPROPRIATE P.P.E. WHILE ASSEMBLING.

PARTS LISTS-1.8M
x2 UPRIGHTS [1] x2 BASE FEET [2]
x2 ‘J ‘ HOOKS [3] x4 BRACE PLATE [4] x8 M12 BOLT [5]
x8 M12 NUT [6] x16 M12 WASHER [7] 2
TOOLING
19MM SPANNER
STEP LADDER

ASSEMBLY
STEP 1
ATTACH x2 UPRIGHTS [1] TO APPROX THE MIDDLE OF THE
BASE FEET [2]. ENSURE THAT THE IRON KING LOGOS ARE
AT THE TOP END AND FACING OUTWARD FROM THE RACK.
FASTEN TOGETHER USING x4 BRACE PLATES [4],
x8 BOLTS [5], x8 NUTS [6] AND x16 WASHERS [7].
ENSURE THE SHORTEST FACE OF
THE BRACE PLATES ARE FACING UP.
REQUIRED
x2 [1] x4 [4]x2 [2]
x8 [6] x16 [7]x8 [5]
3
x2

90°
ASSEMBLYSTEP 2
ATTACH THE x2 ‘J’ HOOKS [3] TO THE UPRIGHTS.
HOLD THE ‘J’ HOOK UPRIGHT SO THAT IT LOOKS LIKE
A ‘J’. TURN THE ‘J’ HOOKS TO THE SIDE AND PLACE
THE PIN INTO A HOLE ON THE FRONT OF THE RACK.
THE HOOK CAN NOW BE TURNED BACK UPRIGHT
SO THAT IT SITS FLUSH WITH THE UPRIGHTS.
REPEAT THIS STEP FOR THE OTHER ‘J’ HOOK,
PLACING IT IN THE EQUIVALENT HOLE.
REQUIRED
x2 [3]
4

FOLLOW
REVIEW
CONTACT
Iron King
@iron_king_gym equipment
#trainincolour
www.ironking.uk.com
[e-mail]
0121 326 9902
5