Iron King S-2.2M User manual

SQUAT STAND
WITH PULL UP BAR
S-2
.2M
#trainincolour

PRODUCT SPECIFICATIONS-2.2M
MAX TRAINING WEIGHT
PRODUCT WEIGHT
DIMENSIONS
PRODUCT FOOTPRINT
350KG
55KG
1.2M x 1.2M x 2.2M
1.2M x 1.2M
1
WARNING
TO AVOID POSSIBLE HARM, READ AND FOLLOW
THIS ADVICE AND THE FOLLOWING INSTRUCTIONS.
MISUSE OF THE EQUIPMENT OR INCORRECT
ASSEMBLY MAY RESULT IN SERIOUS OR FATAL INJURY.
ENSURE THAT ALL PARTS ARE UNDAMAGED
AND IN WORKING ORDER BEFORE
ATTEMPTING TO USE THE PRODUCT.
ENSURE NUTS AND BOLTS ARE TIGHT AND
THAT ALL PARTS ARE PLUMB BEFORE USE.
WE RECOMMEND A MINIMUM OF 2 PEOPLE
FOR SAFE ASSEMBLY OF THE PRODUCT.
WEAR APPROPRIATE P.P.E. WHILE ASSEMBLING.

PARTS LISTS-2.2M
x2 UPRIGHTS [1] x2 BASE FEET [2]
x2 ‘J ‘ HOOKS [5]x1 PULL UP BAR [4]
x4 BRACE PLATE [6] x16 M12 BOLT [7]
x1 BASE HORIZONTAL [3]
x16 M12 NUT [8] x32 M12 WASHER [9]
2
TOOLING
19MM SPANNER
STEP LADDER

ASSEMBLYSTEP 1
PLACE x2 BASE LEGS [2] ON THE GROUND, PARALLEL
TO EACH OTHER WITH THE BASE HORIZONTAL
[3] IN BETWEEN AND PERPENDICULAR TO THEM.
LINE UP THE BASE HORIZONTAL WITH THE
TWO END HOLES ON THE BASE LEGS.
USE x4 BOLTS [7], x4 NUTS [8] AND x8
WASHERS [9] TO ATTACH TOGETHER.
REQUIRED
x2 [2]
x4 [7]
x2
x4 [8] x8 [9]
x1 [3]
3

ASSEMBLYSTEP 2
ATTACH x2 UPRIGHTS [1] TO APPROX THE MIDDLE OF THE
BASE FEET. ENSURE THAT THE IRON KING LOGOS ARE AT
THE TOP END AND FACING OUTWARD FROM THE RACK.
FASTEN TOGETHER USING x4 BRACE PLATES [6],
x8 BOLTS [7], x8 NUTS [8] AND x16 WASHERS [9].
ENSURE THE SHORTEST FACE OF
THE BRACE PLATES ARE FACING UP.
REQUIRED
x2 [1] x4 [6]
x8 [8] x16 [9]x8 [7]
4
x2