Iulock Iu-30 User manual

60mm or 70mm24mm54mm60mm/2-3/8"Lock Components1. Prepare the door and check dimensionsRequired tools （not included）RulerPhilips head screwdriverHammerChiselUse template to mark holesDrill two holesCheck dimenslons4.Install the batteries and performthe door handing process5.Install the interior cover

feed power cable through hole in knob and guide spindle into handle.

Align the exterior keypad with the bore hole. Feed the power cable through latch.The spindle on the exterior keypad should be aligned with the hole in the center of the latch. Insert the spindle through this hole as you press the exterior keypad against the door.

Adjust the latch to the distance you are going to install, 60 or 70mm(Backset 2-3/8” or 2-3/4”)Bore 1'' diameter hole for latchBore 2-1/8'' diameter holeTemplateBacksetmust match lock (2-3/8'' or 2-3/4'')2.Install the latch and strikeInstall latchInstall strike plate3.Install the exterior keypad and the interior assemblySetting latch（2-3/8" or 2-3/4"）Install the exterior keypadInstall the interior assemblyPush out the power cable with a screwdriver70mm/2-3/4"+-+-+-+-2-1/8''IULOCKIU-30 SMART DOOR KNOB Installation and User GuideFeatures. two ways to access: code and key. -30 to 80 °C temperature range. Low power consumption, 4 AAA for 1.5 Years Battery Life or 15,000 times unlock . Backlit keypad for use in low light environments. 1 master code and 50 user codes . Passage mode for hassle-free entry. Color LED indicator lights up to show when codes and commands have been successfully entered. Built-in disguise feature to protect your codes from prying eyes. Low battery warning indication Programming guide Indicator light signals and beep This function is an added security feature which is aimed at preventing passcode theft. With Passcode Disguise, you may enter 40 digits into the keypad. As long as the correct passcode sequence is entered, regardless of how many digits were entered before or afterwards, the lock will unlock.For example, if your user passcode is “112256“, you can successfully unlock the lock by entering “xx...xx112256xx...x”(limit 40 digit).Passcode and Passcode Disguise.The master code MUST EXIST and can be modified, but cannot be deleted. . The lock comes preset with default master passcode 123456. Used to put the lock in programming mode.. Can unlock the lock. Must be different from all of the User Codes currently in the lock. If you forget the master passcode, you can reset the lock to factory settings,which restores the default master passcode. See Restore Factory Settings .User codes can be added, modified, deleted.. The lock comes not preset any User Code. Used to unlock the lock. Must be different from the master passcode and other user passcodes. Up to 50 possible User Codes can be stored in the lock at one time.Master passcodeUser passcodeTo delete all user codes, including the master code, follow the instructions below:1. Use a screwdriver to remove the screws from the interior cover.2. Remove the cover and find the reset button located on the battery pack.3. Press and hold the reset button for 7 seconds until long beep are heard. The master passcode will return to the manufacturer default code '123456'.Restore Factory Settings Change the master passcode as soon as possible! because of the master passcode can unlock the door.After restore factory , KeypadCheck bottonLED indicator

The color of the light indicates & beep ,the status of the lock.

. a correct master passcode or user passcode was entered ,one long beep. the programming process is complete ,one long beep. an incorrect master passcode or user passcode was entered,three short beep . there was an error in programming, three short beep. red blinking and beep after keypad backlit off indicates critically low batteryGreenRedControl of the lock is simply 4-16 digit master passcode or 4-16 digit User passcode.Passcode DisguiseKey

Pay attention toon the spindle "THIS SIDE UP”

Do not pull the power cable too hard

KeyKeypadLED indicatorEmergency Power JackExterior AssemblyPlastic boxStrike plateScrewLatchInterior AssemblyMounting Screws (M4*40mm)Interior Cover

THIS S IDE UPTHIS SIDE UPTHIS S IDE UP

AAAAAAAAAAAA

Rubber gripM4*10mmRubber gripRosette rubber Rosette rubber

Programming Lifetime Limited Mechanical and Finish Warranty and 1-Year Limited Electronics Warranty Subject to the terms and conditions of the warranty, IULOCK extends a lifetime limited mechanical and finish warranty and a one-year limited electronics warranty to the original consumer user (“Original User”) of our IULOCK brand product (“Product”) against defects in material and workmanship, as long as the Original User occupies the residential premises upon which the Product was originally installed.See answers www.iulock.com for specific warranty details WarrantyImportant Safeguards 1. Read all instructions in their entirety. 2. Familiarize yourself with all warning and caution statements. 3. Remind all family members of safety precautions. 4. Protect your user passcode and master passcode. 5. Dispose of used batteries according to local laws and regulations. This Manufacturer advises that no lock can provide complete security by itself. This lock maybe defeated by forcible or technical means. or evaded by entry elsewhere on the property. No lock can substitute for caution, awareness of your environment, and common sense. Builder's hardware is available in multiple performance grades to suit the application. In order to enhance security and reduce risk, you should consult a qualified locksmith or other security professional.WARNING:Why is it beeping after keypad light off?The battery may be low. Please replace the battery.The lock doesn't work?Try replacing the battery or using the backup battery. If the lock still does not work, contact customer support.Why can't I open the door?You may be waiting too long to open the door. After entering a code, turn the handle to open the door while the lock LED indicator light is green. Once the LED indicator light is off, the lock will return to locked position immediately.Why I can open without passcode?You maybe the passage mode active, use master code access will turn off this function .If you just installed it, make sure the "THIS SIDE UP" on the spindle is facing up (ceiling).I forgot all my codes.The lock must undergo a hard reset in order to set the master code back to default and erase all other codes. In order to perform a hard reset, you must have access to the back of the door. TroubleshootingTemplatewww.iulock.com24hr online serviceDELETING USER PASSCODEunwanted user passcodeDELETING ALL USER PASSCODE

PressPressPressPress

Press

EnterEnter

PressPressPressPress

Enter

Note : The master code MUST EXIST, it cannot be deleted, it can only be changed.CHANGING THE USER PASSCODEUnwant user passodeNew user passcodeNew user passcode

Note : The New User Passcode must be different from all of the Passcodes currently in the lock.

PressPressPressPress

Enter

Press

EnterEnter sameEnter

Press

ENABLE BEEPER

PressPressPressPress

Enter

PressPress

With ADVANCED PASSAGE MODE active, you can open the door without requiring a passcode. Only UNLOCK WITH MASTER CODE can turn off this function when it is no longer needed.ENABLE ADVANCED PASSAGE MODE

PressPress

Enter

PressPress

ENABLE EASY PASSAGE MODEWith this EASY PASSAGE MODE active, you can open the door without requiring a passcode. PRESS ANY KEY to turn off this function when it is no longer needed.

PressPressPressPress

Enter

PressPress

Φ1inch1-3/8inch to2-1/2inch2-3/8inch2-3/4inchΦ2inchADDING USER PASSCODENote : The New User Passcode must be different from all of the Passcodes currently in the lock.