iWave iW-RainboW-G22D Installation manual

REL1.1
Page 1 of 71
iWave Systems Technologies Pvt. Ltd.
RZ/G1E SODIMM Development Platform Hardware User Guide
iW-RainboW-G22D
RZ/G1E SODIMM Development Platform
Hardware User Guide

REL1.1
Page 2 of 71
iWave Systems Technologies Pvt. Ltd.
RZ/G1E SODIMM Development Platform Hardware User Guide
Document Revision History
Document Number
iW-RainboW-G22D-RZG1E_SODIMM_DevKit-HardwareUserGuide-REL1.1
Revision
Date
Change Description
1.0
31st Jan 2017
Official Release Version
1.1
31th Jan 2019
Substantive changes throughout the document with respect to RZ/G1E R4.0 SOM
PROPRIETARY NOTICE: This document contains proprietary material for the sole use of the intended recipient(s). Do
not read this document if you are not the intended recipient. Any review, use, distribution or disclosure by others is
strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), you are hereby
notified that any disclosure, copying distribution or use of any of the information contained within this document is
STRICTLY PROHIBITED. Thank you. “iWave Systems Tech. Pvt. Ltd.”

REL1.1
Page 3 of 71
iWave Systems Technologies Pvt. Ltd.
RZ/G1E SODIMM Development Platform Hardware User Guide
Disclaimer
iWave Systems reserves the right to change details in this publication including but not limited to any Product
specification without notice.
No warranty of accuracy is given concerning the contents of the information contained in this publication. To the
extent permitted by law no liability (including liability to any person by reason of negligence) will be accepted by
iWave Systems, its subsidiaries or employees for any direct or indirect loss or damage caused by omissions from or
inaccuracies in this document.
CPU and other major components used in this product may have several silicon errata associated with it. Under no
circumstances, iWave Systems shall be liable for the silicon errata and associated issues.
Trademarks
All registered trademarks, product names mentioned in this publication are the property of their respective owners
and used for identification purposes only.
Certification
iWave Systems Technologies Pvt. Ltd. is an ISO 9001:2015 Certified Company.
Warranty & RMA
Warranty support for Hardware: 1 Year from iWave or iWave's EMS partner.
For warranty terms, go through the below web link,
http://www.iwavesystems.com/support/warranty.html
For Return Merchandise Authorization (RMA), go through the below web link,
http://www.iwavesystems.com/support/rma.html
Technical Support
iWave Systems technical support team is committed to provide the best possible support for our customers so that
our Hardware and Software can be easily migrated and used.
For assistance, contact our Technical Support team at,
Email : [e-mail]
Website : www.iwavesystems.com
Address : iWave Systems Technologies Pvt. Ltd.
# 7/B, 29th Main, BTM Layout 2nd Stage,
Bangalore, Karnataka,
India –560076

REL1.1
Page 4 of 71
iWave Systems Technologies Pvt. Ltd.
RZ/G1E SODIMM Development Platform Hardware User Guide
Table of Contents
1. INTRODUCTION ............................................................................................................................................8
1.1 Purpose .............................................................................................................................................................8
1.2 Overview ...........................................................................................................................................................8
1.3 List of Acronyms................................................................................................................................................8
1.4 Terminlogy Description...................................................................................................................................10
1.5 References ......................................................................................................................................................10
2. ARCHITECTURE AND DESIGN....................................................................................................................... 11
2.1 RZ/G1E SODIMM Carrier Board Block Diagram ..............................................................................................11
2.2 RZ/G1E SODIMM Carrier Board Features .......................................................................................................12
2.3 SODIMM Connector........................................................................................................................................14
2.4 Serial Interface Features.................................................................................................................................29
2.4.1 Debug UART ................................................................................................................................................29
2.4.2 Data UART Header ......................................................................................................................................30
2.5 Communication Features................................................................................................................................31
2.5.1 100/1000Mbps Ethernet.............................................................................................................................31
2.5.2 10/100Mbps Ethernet (Optional)................................................................................................................32
2.5.3 USB2.0 Device .............................................................................................................................................33
2.5.4 USB2.0 Host.................................................................................................................................................34
2.5.5 MicroSD Slot................................................................................................................................................35
2.5.6 CAN Port......................................................................................................................................................36
2.6 Audio/Video Features.....................................................................................................................................37
2.6.1 Audio IN/OUT Jack ......................................................................................................................................37
2.6.2 4.3” RGB LCD with Touch ............................................................................................................................38
2.6.3 8bit CMOS Camera Connector.....................................................................................................................41
2.7 Additional Features.........................................................................................................................................43
2.7.1 Reset Switch ................................................................................................................................................43
2.7.2 JTAG Header................................................................................................................................................44
2.7.3 RTC Coin Cell Holder....................................................................................................................................45
2.8 Expansion Header ...........................................................................................................................................46
2.9 GPIO Header....................................................................................................................................................48
3. ARCHITECTURE AND DESIGN –HDMI ADD-ON MODULE .............................................................................. 50
3.1 RZ/G1E HDMI Add-On Module Block Diagram ...............................................................................................50
3.2 RZ/G1E HDMI Add-On Module Features ........................................................................................................51
3.2.1 HDMI Output...............................................................................................................................................52
3.2.2 Data UART Header ......................................................................................................................................54
3.2.3 High Speed Data UART................................................................................................................................55
3.2.4 CAN1 Header...............................................................................................................................................56
3.2.5 DIP Switch....................................................................................................................................................57
3.2.6 LED ..............................................................................................................................................................58
4. TECHNICAL SPECIFICATION.......................................................................................................................... 59

REL1.1
Page 5 of 71
iWave Systems Technologies Pvt. Ltd.
RZ/G1E SODIMM Development Platform Hardware User Guide
4.1 Electrical Characteristics .................................................................................................................................59
4.1.1 Power Input Requirement ...........................................................................................................................59
4.2 Environmental Characteristics........................................................................................................................61
4.2.1 Environmental Specification........................................................................................................................61
4.2.2 RoHS Compliance ........................................................................................................................................61
4.2.3 Electrostatic Discharge................................................................................................................................61
4.3 Mechanical Characteristics .............................................................................................................................62
4.3.1 RZ/G1E SODIMM Carrier Board Mechanical Dimensions ...........................................................................62
4.3.2 RZ/G1E HDMI Daughter Board Mechanical Dimensions ............................................................................63
5. ORDERING INFORMATION .......................................................................................................................... 64
6. APPENDIX I................................................................................................................................................. 65
6.1 Guidelines to insert the RZ/G1E SODIMM SOM into Carrier Board ...............................................................65
6.2 Guidelines to remove the RZ/G1E SODIMM SOM from Carrier board...........................................................65
7. APPENDIX II................................................................................................................................................ 66
7.1.1 HDMI Add-On Module Integration Procedure................................................................................................66

REL1.1
Page 6 of 71
iWave Systems Technologies Pvt. Ltd.
RZ/G1E SODIMM Development Platform Hardware User Guide
List of Figures
Figure 1: RZ/G1E SODIMM Carrier Board Block Diagram ...............................................................................................11
Figure 2: SODIMM Connector.........................................................................................................................................14
Figure 3: Debug UART .....................................................................................................................................................29
Figure 4: Data UART Header ...........................................................................................................................................30
Figure 5: 100/1000Mbps RJ45 MagJack..........................................................................................................................31
Figure 6 10/100Mbps RJ45 MagJack...............................................................................................................................32
Figure 7: USB2.0 Device Port ..........................................................................................................................................33
Figure 8: USB 2.0 Host Ports ...........................................................................................................................................34
Figure 9: Micro SD Connector.........................................................................................................................................35
Figure 10: CAN Header....................................................................................................................................................36
Figure 11: Audio IN/OUT Jack .........................................................................................................................................37
Figure 12: RGB LCD Connector........................................................................................................................................38
Figure 13: Camera Connector .........................................................................................................................................41
Figure 14: Reset Switch...................................................................................................................................................43
Figure 15 JTAG Header....................................................................................................................................................44
Figure 16: RTC Coin Cell Holder ......................................................................................................................................45
Figure 17: Expansion Header ..........................................................................................................................................46
Figure 18: GPIO Header...................................................................................................................................................48
Figure 19 : HDMI Add On Module Block Diagram...........................................................................................................50
Figure 20 HDMI Board Mating connectors .....................................................................................................................51
Figure 21 HDMI Output Connector.................................................................................................................................52
Figure 22 Data UART Connector .....................................................................................................................................54
Figure 23 High Speed Data UART Connector ..................................................................................................................55
Figure 24 CAN Header.....................................................................................................................................................56
Figure 25: DIP Switch ......................................................................................................................................................57
Figure 26: GPIO Status LED's...........................................................................................................................................58
Figure 27: Power Jack......................................................................................................................................................59
Figure 28: Mechanical dimension of RZ/G1E SODIMM Carrier Board............................................................................62
Figure 29: Mechanical dimension of RZ/G1E SODIMM Carrier Board - Side View.........................................................62
Figure 30 Mechanical dimension of RZ/G1E HDMI Daughter Board - Bottom View......................................................63
Figure 31: RZ/G1E SODIMM Module Insertion procedure .............................................................................................65
Figure 32: RZ/G1E SODIMM Module Removal procedure..............................................................................................65
Figure 33 Pan Head Screw insertion top & bottom view................................................................................................67
Figure 34 Non-Metallic Flat Washer ...............................................................................................................................67
Figure 35 Threaded Metallic Hex Spacer ........................................................................................................................68
Figure 36 HDMI Add-On Module Insertion top & bottom view .....................................................................................68
Figure 37 Metallic Hex Spacer.........................................................................................................................................69
Figure 38 Flat cable Connection top & bottom view ......................................................................................................69
Figure 39 HDMI Cable Insertion......................................................................................................................................70

REL1.1
Page 7 of 71
iWave Systems Technologies Pvt. Ltd.
RZ/G1E SODIMM Development Platform Hardware User Guide
List of Tables
Table 1: Acronyms & Abbreviations..................................................................................................................................8
Table 2: Terminology ......................................................................................................................................................10
Table 3: SODIMM Edge Connector Pin Out ....................................................................................................................15
Table 4: Debug UART Connector Pin Out........................................................................................................................29
Table 5: Data UART Header Pin Out................................................................................................................................30
Table 7: CAN Header Pin Out..........................................................................................................................................36
Table 8: Audio In/Out Jack Pin Out.................................................................................................................................37
Table 9: 4.3” RGB LCD Connector Pin Out ......................................................................................................................39
Table 10: Camera Connector Pin Out .............................................................................................................................42
Table 11: JTAG Header....................................................................................................................................................44
Table 12: RTC Coin Cell Holder Pin Out...........................................................................................................................45
Table 13: Expansion Header Pin Out...............................................................................................................................46
Table 14: GPIO Header Pin Out.......................................................................................................................................48
Table 15 HDMI Output Connector Pin Out .....................................................................................................................52
Table 16 Data UART Header Pin Out...............................................................................................................................54
Table 17 High Speed UART Header Pin Out....................................................................................................................55
Table 18 CAN1 Header Pin Out .......................................................................................................................................56
Table 19 DIP Switch.........................................................................................................................................................57
Table 20 GPIO Status LED's .............................................................................................................................................58
Table 21: Power Jack Pin Out..........................................................................................................................................59
Table 22: Power Input Requirement...............................................................................................................................60
Table 23: Environmental Specification ...........................................................................................................................61
Table 24: Orderable Product Part Numbers ...................................................................................................................64
Table 25 HDMI Add-On Module Accessories..................................................................................................................66

REL1.1
Page 8 of 71
iWave Systems Technologies Pvt. Ltd.
RZ/G1E SODIMM Development Platform Hardware User Guide
1. INTRODUCTION
1.1 Purpose
The RZ/G1E SODIMM development platform incorporates RZ/G1E CPU based SODIMM SOM and SODIMM Carrier
board for complete validation of RZ/G1E CPU functionality. This document is the hardware user guide for the RZ/G1E
SODIMM carrier board. This guide provides detailed information on the overall design and usage of the SODIMM
carrier board from a hardware systems perspective. The details about the RZ/G1E SODIMM SOM hardware is
explained in RZ/G1E SOM user manual document “iW-RainboW-G22M-RZG1E_SODIMMSOM-HardwareUserGuide-
RELx.y”.
1.2 Overview
iWave's RZ/G1E SODIMM development platform incorporates RZ/G1E SODIMM SOM which is based on Renesas’s
RZ/G1E Dual 1.0GHZ ARM Cortex A7 1.0 processor and the SODIMM carrier board with optional 4.3" resistive display
kit. The development board can be used for quick prototyping of various applications targeted by the RZ/G1E
processor. With the 100mmx72mm Pico ITX size, the kit is highly packed with all the necessary on-board connectors
to validate the various RZ/G1E CPU interface features. iWave also supports HDMI Add-On Module for RZ/G1E
SODIMM development platform to validate expansion connector interfaces of RZ/G1E SODIMM SOM.
1.3 List of Acronyms
The following acronyms will be used throughout this document.
Table 1: Acronyms & Abbreviations
Acronyms
Abbreviations
ARM
Advanced RISC Machine
BPP
Bits Per Pixel
CAN
Controller Area Network
CMOS
Complementary Metal-Oxide Semiconductor
CPU
Central Processing Unit
GPIO
General Purpose Input Output
HSCIF
High Speed Serial Communication Interface with FIFO
I2C
Inter-Integrated Circuit
IC
Integrated Circuit
JTAG
Joint Test Action Group
LCD
Liquid Crystal Display
Mbps
Megabits per sec
MHz
Mega Hertz
MSIOF
Clock-Synchronized Serial Interface with FIFO
NC
Not Connected

REL1.1
Page 9 of 71
iWave Systems Technologies Pvt. Ltd.
RZ/G1E SODIMM Development Platform Hardware User Guide
Acronyms
Abbreviations
NPTH
Non-Plated Through hole
PCB
Printed Circuit Board
PTH
Plated Through hole
PWM
Pulse Width Modulation
RTC
Real Time Clock
SCIF
Serial Communication Interface with FIFO
SDIO
Secure Digital Input Output
SDHI
SD Card Host Interface
SSI
Serial Sound Interface
SOM
System On Module
UART
Universal Asynchronous Receiver/Transmitter
USB
Universal Serial Bus
USB OTG
USB On The Go

REL1.1
Page 10 of 71
iWave Systems Technologies Pvt. Ltd.
RZ/G1E SODIMM Development Platform Hardware User Guide
1.4 Terminlogy Description
In this document, wherever Signal Type is mentioned, below terminology is used.
Table 2: Terminology
Terminology
Description
I
Input Signal
O
Output Signal
IO
Bidirectional Input/output Signal
CMOS
Complementary Metal Oxide Semiconductor Signal
OD
Open Drain Signal
OC
Open Collector Signal
Analog
Analog Signal
Power
Power Pin
PU
Pull Up
PD
Pull Down
NA
Not Applicable
NC
Not Connected
Note: Signal Type does not include internal pull-ups or pull-downs implemented by the chip vendors and only includes
the pull-ups or pull-downs implemented on board.
1.5 References
•Renesas’ RZ/G1E CPU Hardware User Manual

REL1.1
Page 11 of 71
iWave Systems Technologies Pvt. Ltd.
RZ/G1E SODIMM Development Platform Hardware User Guide
2. ARCHITECTURE AND DESIGN
This section provides detailed information about the RZ/G1E SODIMM development platform carrier board features
with high level block diagram and detailed information about each block.
2.1 RZ/G1E SODIMM Carrier Board Block Diagram
RZ/G1E SODIMM Carrier Board - Block Diagram
SODIMM
PCB Edge Connector
(200Pin)
HSCIF1
VI1¹ /
MSIOF1²
SDHI0
SSI3/
SSI4
JTAG
3.3V
Power IN
10/100Mbps EtherMAC¹
USB0
RJ45 Mag Jack2
USB TypeA
Connector2
USB Device
USB Micro AB
Connector
I2S Audio
Codec
Audio In/Out
Connector
I2S
SCIF4 UART to USB
Bridge
Debug
USB Micro AB
Connector
UART
Power Jack
(5V)
3.3V Power
Regulator
To On-Board Power
Circuit & Peripherals
Micro SD
Connector
SDHI x 4bit
CAN0
6Pin CAN
Header CAN
Transceiver
JTAG Header JTAG
UART Header
100/1000Mbps EtherAVB
USB1
RJ45 Mag Jack1
USB TypeA
Connector1
8bit Camera
Connector
(OV7725)
RTC
RESET
Control
Switches
RTC Battery
CAN0
UART x 1
I2C5
2 Port
USB HUB HSCIF2,
SCIF1,SCIF5
TPUTO0
GPIO’S,
MSIOF2
20Pin
Expansion
Header
PWM
GPIOs 20Pin GPIO
Header
CAN1 CAN x 1
USB1
¹ Since EtherMAC and VI1 are multiplexed in RZ/G1E CPU, either one interface only can be supported in the RZ/G1E SOM.
2Since VI1 and MSIOF1 are shared the same SODIMM Edge pins, either one interface only can be connected to the SODIMM Edge in the RZ/G1E SOM.
UART x 3
VI1
MSIOF1
DU0 4.3” RGB LCD
Connector
18bpp RGB
TPUTO3
I2C5 Resistive Touch
Controller
I2C5 Resistive TP
Connector
PWM
Figure 1: RZ/G1E SODIMM Carrier Board Block Diagram

REL1.1
Page 12 of 71
iWave Systems Technologies Pvt. Ltd.
RZ/G1E SODIMM Development Platform Hardware User Guide
2.2 RZ/G1E SODIMM Carrier Board Features
RZ/G1E SODIMM carrier board supports the following features to support various interfaces from RZ/G1E SODIMM
SOM Edge connector
Serial Interface Features
•Debug UART through USB Micro AB Connector
•DATA UART (HSCIF1) x 1 Port through Header
Communication Features
•100/1000 Mbps (EtherAVB) Ethernet through RJ45MagJack
•10/100Mbps Ethernet PHY Transceiver (Optional)
•USB 2.0 OTG as a device x 1 Port through Micro AB Connector
•USB 2.0 Host x 2 Ports through USB Type-A Connector
•SD x 1 Port through Micro SD Connector
•CAN x 1 Port through Header
Audio/Video Features
•I2S Audio Codec with 3.5mm Audio IN/OUT jack
•4.3” RGB LCD Connector with Resistive Touch
•8-bit Camera x 1 Port1,2
Additional Features
•Reset Switch
•20-Pin JTAG Connector
•RTC Coin Cell Holder
•RTC Controller (Optional)
20Pin Expansion Header
•Data UART (HSCIF2) x 1 Port
•UART (SCIF1, SCIF5) x 2 Ports
•CAN (CAN1) x 1 Port
•SPI (MSIOF1) x 1 Port2
•PWM x 1 Port
20Pin GPIO Header
•SPI (MSIOF2) x 1
•GPIOs x 12 Nos

REL1.1
Page 13 of 71
iWave Systems Technologies Pvt. Ltd.
RZ/G1E SODIMM Development Platform Hardware User Guide
General Specification
•Power Supply : 5V,2.5A Power Input Jack
•Form Factor : 100mm X 72m Pico ITX
¹ Since EtherMAC and VI1 are multiplexed in RZ/G1E CPU, either one interface only can be supported in the RZ/G1E
SOM. By default, VI1 is supported in the SOM
² VI1 and MSIOF1 are shared the same SODIMM Edge pins in RZ/G1E SOM. Hence either one interface only can be
used from the SODIMM Edge in the RZ/G1E SOM. By default, VI1 is supported in the SOM

REL1.1
Page 14 of 71
iWave Systems Technologies Pvt. Ltd.
RZ/G1E SODIMM Development Platform Hardware User Guide
2.3 SODIMM Connector
RZ/G1E SODIMM Carrier board supports 200 Pin SODIMM Edge mating connector for SODIMM SOM attachment.
This standard 200-pin robust connector is capable of handling high-speed signals and can be used for size
constrained embedded applications. This SODIMM Edge mating connector (J14) is physically located at the top of the
board as shown below.
Figure 2: SODIMM Connector

REL1.1
Page 15 of 71
iWave Systems Technologies Pvt. Ltd.
RZ/G1E SODIMM Development Platform Hardware User Guide
Table 3: SODIMM Edge Connector Pin Out
Pin
No.
SODIMM Edge Connector Signal
Name
Signal Type/
Termination
Description
1
GND
Power
Ground.
2
GPHY_ATXRXM
IO, DIFF
Ethernet transmit differential pair 1 negative.
This pin is connected to RJ45 Magjack J5.
3
NC
-
NC.
4
GPHY_ATXRXP
IO, DIFF
Ethernet transmit differential pair 1 positive.
This pin is connected to RJ45 Magjack J5.
5
GND
Power
Ground.
6
GPHY_BTXRXM
IO, DIFF
Ethernet receive differential pair 2 negative.
This pin is connected to RJ45 Magjack J5.
7
SCIF5_RXD(GP5_1)
O, 3.3V CMOS
SCIF5 serial communication interface data
receiver.
This pin is connected to expansion connector
J12 pin 10.
8
GPHY_BTXRXP
IO, DIFF
Ethernet receive differential pair 2 positive.
This pin is connected to RJ45 Magjack J5.
9
SCIF5_TXD(GP5_2)
I, 3.3V CMOS
SCIF5 serial communication interface data
transmitter.
This pin is connected to expansion connector
J12 pin 9.
10
NC
-
NC in carrier board.
GP0_13 signal from RZ/G1E CPU is available in
this pin.
11
GPHY_LINK_LED2
I, 3.3V CMOS
Gigabit Ethernet link status LED.
This pin is connected to RJ45 Magjack J5.
12
GPHY_ACTIVITY_LED1
I, 3.3V CMOS
Gigabit Ethernet speed status LED.
This pin is connected to RJ45 Magjack J5.
13
GND
Power
Ground.
14
GPHY_CTXRXM
IO, DIFF
Gigabit Ethernet MDI differential pair 3
negative.
This pin is connected to RJ45 Magjack J5.
15
GPHY_DTXRXM
IO, DIFF
Gigabit Ethernet MDI differential pair 4
negative.
This pin is connected to RJ45 Magjack J5.
16
GPHY_CTXRXP
IO, DIFF
Gigabit Ethernet MDI differential pair 3
positive.
This pin is connected to RJ45 Magjack J5.
17
GPHY_DTXRXP
IO, DIFF
Gigabit Ethernet MDI differential pair 4
positive.
This pin is connected to RJ45 Magjack J5.

REL1.1
Page 16 of 71
iWave Systems Technologies Pvt. Ltd.
RZ/G1E SODIMM Development Platform Hardware User Guide
Pin
No.
SODIMM Edge Connector Signal
Name
Signal Type/
Termination
Description
18
NC
I, 3.3V OD
NC in carrier board.
I2C3_SCL(GP0_3) signal from RZ/G1E CPU is
available in this pin.
19
NC
IO, 3.3V OD
NC in carrier board.
I2C3_SDA(GP0_4) signal from RZ/G1E CPU is
available in this pin.
20
VIN_3V3
O, 3.3V Power
Supply Voltage.
21
NC
IO, 3.3V CMOS
NC in carrier board.
GPIO(GP0_1) signal from RZ/G1E CPU is
available in this pin.
22
NC
IO, 3.3V CMOS
NC in carrier board.
GPIO(GP0_2) signal from RZ/G1E CPU is
available in this pin.
23
NC
IO, 3.3V CMOS
NC in carrier board.
GPIO(GP0_7) signal from RZ/G1E CPU is
available in this pin.
24
NC
IO, 3.3V CMOS
NC in carrier board.
GPIO(GP5_3) signal from RZ/G1E CPU is
available in this pin.
25
NC
IO, 3.3V CMOS
NC in carrier board.
GPIO(GP1_23) signal from RZ/G1E CPU is
available in this pin.
26
NC
IO, 3.3V CMOS
NC in carrier board.
GPIO(GP1_24) signal from RZ/G1E CPU is
available in this pin.
27
GND
Power
Ground.
28
NC
IO, 3.3V CMOS
NC in carrier board.
GPIO(GP0_16) signal from RZ/G1E CPU is
available in this pin.
29
NC
IO, 3.3V CMOS
NC in carrier board.
GPIO(GP0_17) signal from RZ/G1E CPU is
available in this pin.
30
ETH_SPEED_LED1
-
NC.
Note: This pin is connected to second ethernet
jack (J4) LED status pin for 10/100 Ethernet
connection.
31
NC
IO, 3.3V CMOS
NC in carrier board.
GPIO(GP0_0) signal from RZ/G1E CPU is
available in this pin.
32
VIN_3V3
O, 3.3V Power
Supply Voltage.

REL1.1
Page 17 of 71
iWave Systems Technologies Pvt. Ltd.
RZ/G1E SODIMM Development Platform Hardware User Guide
Pin
No.
SODIMM Edge Connector Signal
Name
Signal Type/
Termination
Description
33
ETH_LINK_LED0
-
NC.
Note: This pin is connected to second ethernet
jack (J4) LED status pin for 10/100 Ethernet
connection.
34
ETH_TXM
IO, Diff
NC.
Note: This pin is connected to second ethernet
jack (J4) transmit differential pair negative
signal for 10/100 Ethernet connection.
35
ETH_RXM
IO, Diff
NC.
Note: This pin is connected to second ethernet
jack (J4) receive differential pair negative
signal for 10/100 Ethernet connection.
36
ETH_TXP
IO, Diff
NC.
Note: This pin is connected to second ethernet
jack (J4) transmit differential pair positive
signal for 10/100 Ethernet connection.
37
ETH_RXP
IO, Diff
NC.
Note: This pin is connected to second ethernet
jack (J4) receive differential pair positive signal
for 10/100 Ethernet connection.
38
UART0_CTS
O, 3.3V CMOS
UART Clear to send data.
HSCIF1_HCTS(GP4_11) UART signal from
RZ/G1E CPU is available in this pin.
This pin is connected to DATA UART Header
J11 Pin 02.
39
USB1_OVC(GP5_27)
O, 3.3V CMOS/
10K PU
Over current sense signal for USB Host.
This pin is connected from USB HOST over
current indicator.
40
GND
Power
Ground.
41
GND
Power
Ground.
42
NC
IO, 3.3V CMOS
NC.
GPIO(GP0_18) signal from RZ/G1E CPU is
available in this pin.
Note: This pin is connected to second ethernet
jack (J4).
43
NC
IO, 3.3V CMOS
NC.
GPIO(GP1_10) signal from RZ/G1E CPU is
available in this pin.
Note: This pin is connected to second ethernet
jack (J4).

REL1.1
Page 18 of 71
iWave Systems Technologies Pvt. Ltd.
RZ/G1E SODIMM Development Platform Hardware User Guide
Pin
No.
SODIMM Edge Connector Signal
Name
Signal Type/
Termination
Description
44
NC
IO, 3.3V CMOS
NC.
GPIO(GP0_19) signal from RZ/G1E CPU is
available in this pin.
Note: This pin is connected to second ethernet
jack (J4).
45
NC
IO, 3.3V CMOS
NC.
GPIO(GP1_12) signal from RZ/G1E CPU is
available in this pin.
Note: This pin is connected to second ethernet
jack (J4).
46
VIN_3V3
O, 3.3V Power
Supply Voltage.
47
NC
-
NC in carrier board.
MSIOF1_SYNC(GP0_27) signal from RZ/G1E
CPU is optionally connected to this pin.
48
NC
-
NC in carrier board.
GPIO(GP4_0) signal from RZ/G1E CPU is
optionally connected to this pin.
49
NC
-
NC.
50
NC
IO, 3.3V CMOS
NC in carrier board.
GPIO(GP1_15) signal from RZ/G1E CPU is
optionally connected to this pin.
51
GND
Power
Ground.
52
NC
IO, 3.3V CMOS
NC in carrier board.
SCIF2_RXD(GP4_16) signal from RZ/G1E CPU is
optionally connected to this pin.
53
NC
IO, 3.3V CMOS
NC in carrier board.
SCIF2_TXD(GP4_17) signal from RZ/G1E CPU is
optionally connected to this pin.
54
NC
IO, 3.3V CMOS
NC in carrier board.
SCIF2_SCK(GP4_18) signal from RZ/G1E CPU is
optionally connected to this pin.
55
NC
IO, 3.3V CMOS
NC in carrier board.
SCIF3_SCK(GP4_19) signal from RZ/G1E CPU is
optionally connected to this pin.
56
NC
IO, 3.3V CMOS
NC in carrier board.
SCIF3_RXD(GP4_20) signal from RZ/G1E CPU is
optionally connected to this pin.
57
NC
IO, 3.3V CMOS
NC in carrier board.
SCIF3_TXD(GP4_21) signal from RZ/G1E CPU is
optionally connected to this pin.

REL1.1
Page 19 of 71
iWave Systems Technologies Pvt. Ltd.
RZ/G1E SODIMM Development Platform Hardware User Guide
Pin
No.
SODIMM Edge Connector Signal
Name
Signal Type/
Termination
Description
58
NC
IO, 3.3V CMOS
NC in carrier board.
GPIO(GP4_22) signal from RZ/G1E CPU is
optionally connected to this pin.
59
NC
IO, 3.3V CMOS
NC in carrier board.
GPIO(GP4_23) signal from RZ/G1E CPU is
optionally connected to this pin.
60
VIN_3V3
O, 3.3V Power
Supply Voltage.
61
SSI_SDATA4(GP5_9)
O, 3.3V CMOS
SSI Audio receive data.
This pin is connected from I2S audio codec.
62
ETH_RXD0/VI1_DATA1(GP5_13)¹
²
O, 3.3V CMOS
VIN1 Parallel Camera Data1.
This pin is connected from camera connector
J7.
63
EXP_VI1_DATA3(GP5_15)¹ ²
O, 3.3V CMOS
VIN1 Parallel Camera Data3.
This pin is connected from camera connector
J7.
64
SCIF1_SCK(GP4_13)
I, 3.3V CMOS
SCIF1 Synchronous clock output.
This pin is optionally connected to I2S audio
codec SYS_MCLK pin through resistor and
default not populated.
65
GND
Power
Ground.
66
ETH_RX_ER/VI1_DATA0(GP5_12)¹
²
O, 3.3V CMOS
VIN1 Parallel Camera Data0.
This pin is connected from camera connector
J7.
67
SSI_SDATA3(GP5_6)
I, 3.3V CMOS
Audio Transmit data.
This pin is connected to I2S audio codec.
68
MSIOF0_RXD/SCIF5_RXD(GP4_2)
I, 3.3V CMOS
General Purpose Input/output.
This pin is connected to CAN1 Transceiver
Power down control.
69
NC
-
NC in carrier board.
GPIO(GP4_3) signal from RZ/G1E CPU is
optionally connected to this pin.
70
ETH_RXD1/VI1_DATA2(GP5_14)¹
²
O, 3.3V CMOS
VIN1 Parallel Camera Data2.
This pin is connected from camera connector.
This signal is also connected to Expansion
Header J12 Pin 15.
71
MSIOF1_SS2(GP0_29/MD6)
I, 3.3V CMOS
MSIOF1 Chip select signal.
This signal is connected to Expansion Header
J12 Pin 16.
72
VIN_3V3
O, 3.3V Power
Supply Voltage.
73
MSIOF0_SCK(GP4_4)
O, 3.3V CMOS
10K PU
General Purpose Input/Output.
This pin is connected from Touch Controller
Interrupt.

REL1.1
Page 20 of 71
iWave Systems Technologies Pvt. Ltd.
RZ/G1E SODIMM Development Platform Hardware User Guide
Pin
No.
SODIMM Edge Connector Signal
Name
Signal Type/
Termination
Description
74
HSCIF1_HSCK(GP4_10)
IO, 3.3V CMOS
HSCIF1 High Speed Serial Communication
Interface clock (Or) General Purpose
Input/Output. This pin is connected to GPIO
Header J16 Pin 09.
75
UART0_RTS
I, 3.3V CMOS
UART Ready to receive data.
HSCIF1_HRTS(GP4_12) UART signal from
RZ/G1E CPU is available in this pin
This pin is connected to DATA UART Header
J11 Pin 02.
76
USB0_OVC(GP5_25)
O, 3.3V CMOS
10K PU
USB0 OTG port over current sense.
This pin is connected from USB OTG Over
current indicator.
77
MSIOF0_SS1(GP4_6)
O, 3.3V CMOS
MSIOF0 frame synchronization signal1 or GPIO
for USB OTG ID to identify Host & Device.
This pin is connected from Micro USB OTG
connector J6 ID Pin.
78
USB0_PWEN(GP5_24)
I, 3.3V CMOS
General Purpose Input/Output.
Note: This pin is optionally connected to USB
OTG Power enable through resistor and
default not populated.
79
GND
Power
Ground.
80
MSIOF0_SS2(GP4_7)
IO, 3.3V CMOS
MSIOF0 frame synchronization signal2 (or)
General Purpose Input/Output.
This pin is connected to GPIO Header J16 Pin
12.
81
USB0_DP
IO, DIFF
USB OTG data positive.
This pin is connected to Micro USB OTG
connector J6.
82
NC
-
NC in carrier board.
SD0_WP(GP6_7) signal from RZ/G1E CPU is
available in this pin.
83
USB0_DM
IO, DIFF
USB OTG data negative.
This pin is connected to Micro USB OTG
connector J6.
84
NC
-
NC in carrier board.
GPIO(GP2_29) signal from RZ/G1E CPU is
available in this pin.
85
NC
-
NC in carrier board.
GPIO(GP2_31) signal from RZ/G1E CPU is
available in this pin.