IWILL DVD266 User manual

1
DVD266/DVD266-RVersion1.3A
TableofContent
FB11342400000
Quick Installation.................................................. 4
1.1Layout........................................................................... 4
1.2ItemChecklist.............................................................. 5
1.3Jumpers....................................................................... 5
1.4Connectors.................................................................. 7
1.5FormFactor............................................................... 14
Feature................................................................. 15
2.1MotherboardComponentsPlacement.................... 15
2.2Block Diagram............................................................ 17
2.3Specifications............................................................ 18
HardwareSetup .................................................. 20
3.1BeforeInstallation ..................................................... 20
3.2Install theProcessor................................................. 21
3.3Install MemoryModules ............................................ 25
3.4ATXPowerSupplyconnector................................... 27
3.5Back Panel ................................................................. 29

Chapter1QuickInstallation
2
BIOSSetup .......................................................... 30
4.1PhoenixNetIntroduction........................................... 30
4.2BIOSSetup................................................................. 33
4.3MainMenu .................................................................. 35
4.4StandardCMOSFeatures ......................................... 36
4.5AdvancedBIOSFeatures .......................................... 41
4.6AdvancedChipsetFeatures ...................................... 47
4.7IntegratedPeripherals.............................................. 52
4.8PowerManagementSetup ........................................ 60
4.9PnP/PCIConfigurations........................................... 67
4.10 PCHealthStatus...................................................... 71
4.11 Iwill SmartSetting ................................................... 72
4.12 LoadFail SafeDefaults........................................... 75
4.13LoadOptimizedDefaults.......................................... 76
4.14 SetSupervisor/UserPasswordSetting ................ 77
4.15 Save&ExitSetup/ExitWithoutSaving ................. 78
OnboardAudio....................................................79
5.1AudioFeatures........................................................... 79
5.2DriverInstallation ...................................................... 80
5.3TheAudioRack.......................................................... 84

3
Chapter1QuickInstallation
PowerInstallarCD.............................................. 91
6.1SoftwareInstallation ................................................. 91
6.2Howtouse thePowerinstallerCD.......................... 91
6.3Howtomake driverdiskette..................................... 92
6.4Install Driver............................................................... 93
6.5Install SoftwareUtility............................................... 94

Chapter1QuickInstallation
4
1QuickInstallation
1.1Layout
SPDIF
(SPDIF Version )Only
SmBus Flash
Keyboard Boot
Audio
AUX IN
CD IN
DRAM Votage
Mdm
WOL
USB2
USB1
CASE
CPU FAN
CPU 0
CPU 1
CPU FAN
ATX Power Connector
AGP
PCI1
PCI2
PCI3
PCI4
PCI5
I
D
E
R
A
I
D
0
I
D
E
0
I
D
E
R
A
I
D
1
I
D
E
1
D
M
3
D
M
2
VT8233
RAID
IR
CMOS
Fsys
Front Panel Connector
C3DX HSP56
CMI8738
Winbond
D
V
D
2
6
6
-
R

5
Chapter1QuickInstallation
1.2ItemChecklist
The motherboard
Operation manual
ATA66/100 cable
Floppycable
PowerInstallerCD
2xHigh QualityCPU Cooler
Optional
USB riserkit
ThermalSensorforSystem
1.3 Jumpers
1.3.1ClearCMOSjumper(CMOS)
Clear CMOS Jumper
Normal (Default)
Clear CMOS

Chapter1QuickInstallation
6
Audiojumper
IDE RAID jum per(DVD266-R O nly)
IDE RAID
Enabled (Default)
Disabled
1 2 3
1 2 3
Audio
Enabled (Default)
Disabled
1 2 3
1 2 3

7
Chapter1QuickInstallation
FAN Connectors
J39:CPU 0Fan header(J39)J40:CPU 1Fan header
J70:AuxiliaryFan header(J70)J41:SystemFan header(J41)
Infraredconnector(IR)
CPU FAN
1: GND
2: 12V
3: Sensor
Aux FAN
1: GND
2: 12V
3: NC
System FAN
1: GND
2: 12V
3: Sensor
PIN Assignment
1:5V
2:NC
3:IRRX
4:GND
5:IRTX
6:NC
7:CIRRX
8:5VSB
9:NC
10: NC
6 7 8 9
1 2 3 4 5
10

Chapter1QuickInstallation
8
1.4.5Wake-ON-LAN header
1.4.6 W ake On M oden
PIN Assignment
1:5VSB
2:GND
3: LAN Wake
1 2 3
PIN Assignment
1:5VSB
2:GND
3: Control PIN
1 2 3

9
Chapter1QuickInstallation
1.4.7Case Open
1.4.9Frontpanelconnector(J43)
1
13
12
24
Case Open

Chapter1QuickInstallation
10
Function Pin No. Definition
PWR ON (Power /Soft Off) 12, 24
ACPI (ACPI LED) 21, 22 Pin 21: Anode
Pin 22: Cathode
ALED (IDE LED) 17, 18 Pin 17: Anode
Pin 18: Cathode
RST (Reset) 13, 14 Pin 13: Reset
Pin 14: GND
PLED (System Power LED) 8, 9, 10 Pin 8: VCC Pin 9: NC
Pin 10: GND
SPKR (System Speaker) 1, 2, 3, 4
Pin 1:VCC
Pin 2: GND
Pin 3: NC
Pin 4: Speaker
(BUZZ)
KeyLock 6, 7

11
Chapter1QuickInstallation
Aux-Inconnector(Aux_IN)
AUX_IN
Pin Assignment
1:Left channel
2-3:GND
4:RightChannel
1234
CD_Inconnector(CD_IN)
CD_IN
Pin Assignment
1:Left channel
2:GND
3:GND
4:Right Channel
1
2
3
4

Chapter1QuickInstallation
12
1.4.11 InternalUSBconnector
The motherboardhastwoUSB portsonboard.The extratwo
USB supportcan onlyfunctionablewiththe additionalUSB
riserkit.
USB1
USB2
2 4 6 8
1 3 5 7 9
10
Pin Assignment
1:5V
2:5V
3:USBDT2-
4:USBDT3-
5:USBT2+
6:USBDT3+
7:GND
8:GND
9:GND
10:NC

13
Chapter1QuickInstallation
1.4.12ATXpowerconnector(J37)
1
10
11
20
Pin Assignment
Pin No. Definition Pin No. Definition
1+3.3V 11 +3.3V
2+3.3V 12 -12V
3Ground 13 Ground
4+5V 14 Power
Supply On
5Ground 15 Ground
6+5V 16 Ground
7Ground 17 Ground
8Power
Good 18 -5V
9+5V
Standby 19 +5V
10 +12V 20 +5V

Chapter1QuickInstallation
14
1.5FormFactor
VT8233
C3DX HSP56
CMI8738
Winbond
D
V
D
2
6
6
-
R
260CM
3
0
5
C
M

15
Chapter2Feature
2Features
2.1MotherboardComponentsPlacement
17
1
3
2
4
5
7
6
8
10
9
16
15
14
13
12
11
18
19

16
Chapter2Feature
[
NO. Description
1ATX Power connector
2VIA VT8633
3CPU 0 Socket
4System Memory Socket (DDR)
5 On board IDE Channels
6AGP slot
7IDE RAID Channels
8VIA VT8233
9FDC connector
10 AMI IDE RAID Chip (MG80649)
11 5 x PCI slots
12 Joystick, Midi Line In / Out, Mic In
13 COM2
14 Parallel connector
15 COM1
16 USB ports
17 PS2 Mouse / Keyboard
18 Winbond (W83627HF)
19 CPU 1 Socket

17
Chapter2Feature
2.2BlockDiagram

18
Chapter2Feature
2.3Specifications
Processor/Socket370
SupportsSocket370 processors
Supports66M/100M/133MHzFrontSide Bus
SupportDualorSingleIntelPentiumIII (Cu-256,FCPGA)CPU from
500MHzto1.13GHzorhigher
SupportsSingleIntelCeleron (Cu-128,FCPGAM)CPU from
566MHzto800MHzorhigher
CPUFrequency/VoltageSelection
SupportsVcoreselectionfromBIOS
SupportsCPU Multiplierselection by BIOS(from2Xto12X)
SupportsCPU ExternalFrequency selectionby BIOS
Memory
DRAMinterface may be faster/slowerthan CPUby 33MHz
SupportsPC2100/1600 DDRMemory
SupportsUnbuffered/Registered DDRmemorymodule
Supports16M/64M/256M/512MSDRAM
MaximumSystemMemoryup to4GB
Graphics
SupportsAGP4x/AGP2xMode
GeneralI/O
PCI2.2compliance
Supports32-bit/33MHzPCIinterface
SupportsUDMA100/66/33
SupportsLPCinterface
SupportsFloppy interface
Supports16550AUARTinterface
SupportsECP/EPP interface
SupportsPS2interface
SupportsSIR/CIRinterface
SupportsUSB interface

19
Chapter2Feature
RAIDSupport(DVD266-Ronly)
Supports2ATA66/100 channels
SupportsRAIDLevel0/1/0+1
Supports“SPARE”feature
SupportsWin9X/WinNT/Win2k/Linx
OnboardPCIAudio
C-MediaCM8738 4.1channelHardwareSoundon board
Management
SupportsVoltage monitoring
SupportsFancontrolsignal
SupportsTemperaturesensor
SupportsChassisIntrusion
SupportsPoweron by Ext.Modem/Int.Modem/RTC/PME
SupportsResumeby LAN/Ext.Modem/Int.Modem/PS2Keyboard/
PS2Mouse/RTC/PME
SupportsACPIBlinking LED
SupportsAPM/DMI/SMBUS/PnP
SupportsBIOSROMFlashControl
SupportsManuallyAssign PCIIRQ
Expansion Slot
FourDDRsockets
One UniversalAGPslot
Five32bit/33MHzBusMasterPCIslots
TwoIDEconnectors
TwoIDERAIDconnectors
One FDCconnector
TwoInternalUSBx2connectors
Acessory
One Operation Manual
One 34-pinfloppy cable
Two40-pinATA100/66 IDEcables
TwoHigh QualityCPU Coolers
One IWILL PowerInstallerCD
Twocpu Fans

20
Chapter3HardwareSetup
3HardwareSetup
3.1BeforeInstallation
Forinstallation,you may need someorall ofthe following tools:
Mediumsizeflatblade screwdriver
MediumsizePhillipshead screwdriver
A3/16 inch nutdriverorwrench
Users must follow these guidelines to ensure the
motherboard is protected during installation.
1.Make sure your computer is powered-off wheneven
work in with inside components
2.The motherboard, like all other electronic equipment, is
sensitive to static. Please take the proper precautions
when handling it. If possible, ground yourself by touching a
metal table or desk. keep the board in its conductive
wrapping until it is configured and ready to be installed in
your system.
3.Keep all magnets away from both your hard and floppy
disk drives, especially magnetic screwdrivers. Keep both
floppy and hard disks apart if disassembed.
4.Keep water and liquids away from your computer and its
components.