&RQWHQWV
Notice............................................................................3
Warranty .......................................................................3
Certifications.................................................................3
Warning ........................................................................3
Usage Precautions .......................................................6
Features........................................................................7
Parts Identification........................................................8
3UHSDUDWLRQ
Preparation Process...................................................12
Step 1: Installing the Software (first time only)............12
Step 2: Connecting Devices........................................13
Step 3:Verifying the Camera’s Network Connection
Status..........................................................................14
Step 4: Verifying the Connection between the Camera
and PC ............................................................15
Step 5: Changing the Camera Settings ......................17
Step 6: Adjusting the Image Quality ...........................21
Step 7: Saving the Settings.........................................22
Basic Function Matrix .................................................24
0DLQ)XQFWLRQV
GPIO (Digital Input/Output Settings)...........................25
Valid Input/Output Combinations............................25
Acquisition Control (Image Acquisition Controls)........26
Changing the Frame Rate ......................................26
Maximum Frame Rate.............................................26
Maximum frame rate period formula ..................27
Exposure Mode...........................................................28
Trigger Control............................................................28
Shortest Repetition Period for Triggers...................29
When [Exposure Mode] is [Timed].....................29
When [Exposure Mode] is [Trigger Width] .........30
Event Control..............................................................31
Event message occurrence diagram .................31
Internal camera blocks .......................................31
To use the event control function........................32
Gain Control................................................................32
LUT (Lookup Table) ....................................................33
To use the LUT function ......................................33
LUT values..........................................................34
Gamma Function........................................................34
To use the gamma function ................................34
Line Status..................................................................35
Defective Pixel Correction Function............................35
Automatic detection............................................35
Manual configuration ..........................................35
Shading Correction.....................................................36
Flat Shading........................................................36
Color Shading (GO-5101C-PGE only) ................37
To use the shading correction function ..............37
Binning Function.........................................................37
ROI (Regional Scanning Function).............................38
ROI Settings............................................................38
Sequencer Function....................................................38
Delayed Readout [Acquisition Transfer Start] .............41
ALC (Automatic Level Control) Function.....................42
To use the ALC function......................................42
Automatic gain level control ...............................42
Detailed Settings for Gain Auto
(Automatic Gain Level Control) ..............................42
Counter and Timer Control Function
(counter support only).................................................43
Counter occurrence diagram .............................43
Internal camera blocks .......................................44
To use the counter function ................................44
Video Process Bypass Mode......................................45
Differences in camera operation ........................45
To enable video process bypass mode..............45
6HWWLQJV/LVW
Feature Properties......................................................46
Settings.......................................................................55
0LVFHOODQHRXV
Troubleshooting ..........................................................57
Specifications..............................................................58
Frame Rate Reference ...............................................60
Spectral Response .....................................................60
Dimensions.................................................................61
User’s Record.............................................................62
,QGH[
— 2 —
GO-5101M-PGE / GO-5101C-PGE
Non-Volatile Flash Memory.................................45
