value (middle display) related to the value may be set.
Example:
Press START button, then the credit value shall be set, i.e. to 0,5 (upper
display). Confirm it by pushing SETUP button, then set the number of pulses
(middle display) related to 1. It means that inserting two coins in this
channel gives 1 credit and 2 pulses on mechanical counter.
OPTIONS 4-6: these options relate to banknotes. You can set them in the
same way like you set coins.
OPTION 7: RECORD
In this option the record value of the machine in the range 10-999 can be
changed. To do this, press START button, then the required record value shall be set
by using MAN / STRONG MAN buttons.
OPTION 8: HARDWARE TEST
Pressing appropriate buttons enables performing of the operation test of the
device. By pressing SETUP you will check: matrix display, keys and keys highlight. By
pressing START you will check: sensor, motor and lamps highlight and halogen lamps.
OPTION 9: FACTORY SETTINGS
Pressing START button you will enter the factory settings.
Initial parameters are:
OPTION 10: THE PRESENTATION REPEAT TIME
This option enables changing of the presentation repeat time. Set in seconds
the presentation time, after which the music is will be played. Pressing START you
will confirm time, which you need.