jakar SPEED HUNTER User manual

MANUFACTURER AND SELLER OF AMUSEMENT MACHINES
JAKAR, 44 – 240 Żory, ul. Fabryczna 10, Poland
Tel./fax. [phone]; www.jakar.pl
e-mail: info @jakar.pl
SPEED HUNTER
OPERATOR'S MANUAL

I. INTRODUCTION
Spee hunter is a bran new amusement machine on the market! It has been ma e from the best
quality materials. The Spee Hunter can be place in oor, ex. in shopping centres, clubs, playgroun s or
iscos. Every player has guarantee great fun uring playing this game.
All fun lovers are given a great opportunity to take part in an unforgettable car race. The main goal of
the game is to rive the car successfully up to the finish line without crash. If the finish line is reache , prize
will be won.
Player rive the car by moving the joystick. The car must follow exactly the mi le of the roa , as
hiting crash barriers en s the race. At the begining of the race, player chooses one out of three roa s:
−left si e roa : race for Small Prize,
−mi le roa : race for Small Prize,
−right si e roa : race for Big Prize.
II. TECHNICAL PARAMETERS
Height: 200 cm
Width: 0 cm
Lenght: 90 cm
Weight: 205 kg
Power supply: 220 – 240 V
Power consumption: 90 W
!!! ATTENTION !!!
All metal parts are connected to ether and the machine
must be plu ed into the socket with round terminal AC 230 V 50 Hz.
Only this connection makes the ame safe and the machine will work properly.
III. PRIMARY SETUP
To enter SETUP there have to be 0 cre its on the machine.
Use buttons from the remote controller, situate behin the front oor.

Press SET button to choose function.
All messages are shown on LCD isplay, on the front panel.
VOLUME DEMO – use buttons DOWN / UP to set emonstration volume
VOUME VOICE – use buttons DOWN / UP to set voice volume
VOLUME MUSIC – use buttons DOWN / UP to set music volume
VOLUME ALARM – use buttons DOWN / UP to set alarm volume
VOLUME WIN – use buttons DOWN / UP to set winning soun volume
VOLUME MP3 – use buttons DOWN / UP to set volume mp3 (up, own)
BASS MP3 – use buttons DOWN / UP to choose more or less bass line
TREBLE MP 3 - use buttons DOWN / UP to choose more or less trebles
Electronic Counter:
IN1: not possible to cancel – quantity of cre its from the beginning
IN2: possible to cancel (by pressing buttons DOWN / UP) - quantity of cre its after last cancellation
OUT1: quantity of wins (big prizes)
OUT2: quantity of wins (small prizes)
Not possible to cancel
CREDITS SETTINGS – FOR COIN AND BILL ACCEPTORS
Example - € (eur) coins,
We want the machine work with 0,50/1/2 € coins, an 5/10/20 € bills,
an counters will count money 1:1
0,50 € = 0,50 cre it
1 € = 1 cre it
2 € = 3 cre its
5 € = 6 cre its
10 € = 12 cre its
20 € = 25 cre its
For coins:
COIN CHN1: 0,50
Cre its: 0,50
COIN CHN2: 1
Cre its: 1
COIN CHN3: 2
Cre its: 3
For bills:
BANK CHN1: 5
Cre its: 6
BANKCHN2: 10
Cre its: 12
BANK CHN3: 20
Cre its: 25
Use buttons DOWN / UP to change value of coin an number of cre its
Use button SET to move between channels (1 - 4) an Cre its
The arrow means which position you can change at the moment
There are 4 channels for coin acceptor: COIN CHN2, COIN CHN3, COIN CHN4;
an for bill acceptor: BANK CHN1, BANK CHN2, BANK CHN3, BANK CHN4

FREE PLAY
Use buttons DOWN / UP to choose type of game
Off – free play mo e off
On – free play mo e on
TICKET DISP
IV. SPEED HUNTER SETUP
To enter SETUP there have to be 0 cre its on the machine.
Press simultaneously buttons DOWN an UP to enter the SETUP.
Use SET button to choose function.
GIVE BALL BEFORE GAME OR NOT - use buttons DOWN / UP to choose whether the machine will
give a capsule
RESET – back to factory settin s - Press simultaneously buttons DOWN an UP. Then, press SET button to
return to factory settings.
STATISTIC LINE - Press simultaneously buttons DOWN an UP to check statistics, how many wins for
how many games playe
PRESENTATION TIME - use buttons DOWN / UP to set the presentation time
CALIBRATION
Press simultaneously buttons DOWN an UP.
Then, press SET button.
Calibration will start automatically.
You can receive some instructions on the LCD isplay, what to o uring calibration:
Loosen the belt Y or increase to 12,8V – please loosen vertical belt (loosen screws on attache photo, an
move a little bit the whole mechanism own)
Ti hten the belt Y or reduce to 12,2V – please tighten vertical belt (tighten screws on attache photo, move
a little bit the whole mechanism up)
Loosen the belt X or increase to 12,8 V – please loosen horizontal belt (loosen screws on attache photo, an
move a little bit the whole mechanism to left si e)
Ti hten the belt X or reduce to 12,2V – please tighten horizontal belt (tighten screws on attache photo,
move a little bit the whole mechanism to right si e)

Apply rease on m. Y and repeat calibration
Apply rease on m. X and repeat calibration

When calibration will be finishe on the LCD isplay you will see “CALIBRATION OK”.
Then, switch off an switch on the machine.
V. ERRORS
ER 1 – Tilt
ER 2 – Prize sensor tilt
ER 3 – Switch Win (mechanism oes not reach position “UP”)
ER 4 – Disconnecte cable from ro en ing or mechanism is blocke mechanically
ER 5 – machine is miscalibrate

ER 6 – prize is won, but blocks are still on (cable from ro en ing is isconnecte or cable from e ge is
isconnecte )
ERROR Sens 03 (Cz.Na) – prize sensors o not work correctly (please clean them, check cable connection)
IMPORTANT:
ERRORS 4, 5, and 6 will block the machine. It must be unblocked manually by operator

VII. HOW TO PUT THE PRIZES ON THE PRIZE ARMS
Prize Arm with lockin pin inside Lockin Pin
Han in Ties
1. Unscrew the Locking Pin, by turning it in a clockwise irection.
2. Remove the locking pin by pulling it all the way out.
3. Put plastic hanging tie on each prize, so they will hang on the loop ma e with it.
4. First prize to be won, shoul be positione on the first spiral, at the front.
5. Space the prizes apart on the arm, by every 2-3 spirals.
6. Reinsert the locking pin, an tighten it by turning it in anti-clockwise irection.
7. Make sure the locking pin stays above hanging ties.