jakar THE BASKETBALL User manual

JAKAR
MANUFACTURER OF AMUSEMENT MACHINES
[email protected]
tel. [phone]
THE BASKETBALL
machine manual

I. INTRODUCTION.
The „BASKET” strength machine is the amusement device designed for play in bars, clubs, cinemas,
festivities, amusement parks, etc. The machine is profit-making device not paying the money prizes.
The machine is designed and made from state of the art materials and parts available on the market.
Components of the device are compliant with the safety standards, what is confirmed by CE certificate.
II. TECHNICAL PARAMETERS
Height
255 cm
Width
100 cm
Length
275 cm
Total weight
250 kg
Power supply
220 –240 V
III. BASKET PARAMETERS CHANGE - SETUP.
To enter SETUP turn-off the machine an holding SETUP key on the MAIN board turn it back on.
Switching between the SETUP items is realised by the following keys:
Confirmation of the selected option
- ENTER button
Browsing the options
- Pushing left / right buttons
1 - 6. Setting credits.
In option 1-3 set number of credits which shall be granted by the machine after a coin is inserted
on the first, second and third coinbox channel. These are double options. The number of games
relating (left display) and the coin value (right display) can be set.
Example: Push ENTER, when small display is blinking the credit value shall be set, i.e. to 0,5.
Confirm by pushing ENTER, then set the coin value i.e. 1. It means that inserting two
coins on this channel gives 1 credit and 2 pulses to mechanical counter.
Options 4-6 relates to banknotes. Coding is realised the same way as above.
7. Record.
In this option the machine record value in the range 10 –999 can be changed.
For that purpose ENTER shall be pushed, then the required record value shall be set using
left / right buttons.
8. Test hardware.
Pushing appropriate buttons enables performing of the device operation test After SETUP
is pushed the following are tested: After ENTER is pushed the following are tested:
- motor
- Opening the ball hatch and setting the basket in middle position
- Closing the ball hatch and setting the basket in middle position.
9. Factory settings.
Pushing the ENTER button causes setting of setup options to factory settings.
Initial parameters are:

CREDIT
- 0
PULSES
- 1 , 2 , 5
CREDITS
- 1 , 2 , 5
RECORD
- 100
ROUND TIME
- 60 s
MIN NUMBER OF POINTS TO ADVANCE TO 2nd ROUND
- 50
MIN NUMBER OF POINTS TO ADVANCE TO 3rd ROUND
- 100
PRESENTATION REPEAT TIME
- 300 s = 5 min
FREE PLAY
- OFF
NUMBER OF TICKETS FOR BEATING RECORD
- 0
MIN NUMBER OF POINTS FOR GRANTING THE TICKETS
- 500
FOR HOW MANY POINTS OVER A MINUTE THE TICKETS
ARE GRANTED
- 500
LANGUAGE
- 1(ang)
LINK ADDRESS
- 1 (slave)
COUNTER (current counter)
- 0
NAME
- AAAAA
10. The presentation repeat time.
The option enables changing of the presentation repeat time. Set in seconds presents time,
after which the music is played. Push ENTER then set the desired time and confirm.
11. Current counter.
This is the number of pulses recorded in the machine from last settling.
The current counter is reset after ENTER is pushed
12. Electronic counter.
This is information about number of pulses from the beginning of machine production.
The number cannot be deleted. (Right display)
13. Resetting credits.
Push ENTER to reset number of credits.
14. Free Play - free of charge play.
Push ENTER, switching through left display enables game parameters changing
000
- Charged
001
- Free Play (gra za darmo)
Confirm pushing ENTER after an option is selected
15 –17. Ticket Score.
18. Mechanical counter check
The number is presented on the left display. Push ENTER to change the time number,
then select the desired number.
1
- mechanical counter check active
0
- mechanical counter check inactive
19. Settings for the manufacturer.
20. Round time.
Time in seconds is presented on the left display. It means time of the round in seconds.

21. Round time.
Result is presented on the left display. It means minimum number of points required for advance
to 2nd round.
22. Round time.
Result is presented on the left display. It means minimum number of points required for advance
to 3rd round.
23. LINK.
In this option the device address in LINK network is set. Each device is connected with others
must have other address. At least one MASTER device with address 0 must be in the network,
information on the left display. Other devices shall have following addresses (1,2,3(...) –15.
It allows to connect together 16 devices (as MASTER has address 0).
The settings can be accepted with ENTER..
During a game, left display presents number of points won by the best player in the game.
Only the players who won the required number of points will be advanced to the next round.
24. SETTINGS.
MATRIX / SIMPLE. NOTE! For the manufacturer.