JAMEC PEM TDR2000 User manual

TYRE INFLATOR
ANALOGUE - TDR2000
OPERATING INSTRUCTIONS
PRODUCT NO.
10.2000 - 500 mm Hose- Hold on dual angle - TYRE INFLATOR ANALOGUE - TDR2000
10.2000OS - 500 mm Hose- Hold on dual angle - TYRE INFLATOR ANALOGUE - TDR2000
10.2000OS4 - 2700 mm Hose- Single clip on chuck - TYRE INFLATOR ANALOGUE - TDR2000
10.2000OS5- 2700 mm Hose - Twin clip on chuck dual angle - TYRE INFLATOR ANALOGUE - TDR2000

TYRE INFLATOR
ANALOGUE - TDR2000
The Jamec Pem TDR2000 Tyre Inator represent quality and guaranteed
accuracy. The classic handheld, slimline design is easy to hold and is
designed to last in rugged workshop environments, utilised in a majority of
Australian service stations.
FEATURES
Includes Certicate of calibration
Multi scale analogue bar gauge
Wire sheathed hose eliminates kinking
Impact absorbing bumpers
Tough die cast aluminium housing
Accuracy exceeds EC Standards
Rubber grip on chuck
IP rated
MAINTENANCE MONTHLY
Remove the ‘oil’ screw on the side of the gauge and place 2-3 drops of
‘light’ oil into the gauge mechanism.
IMPORTANT
This tyre inator must only be connected to air line systems which have
clean dry air. Any moisture in the air line system may cause damage to
the operation of this tyre inator and void warranty.
Air pre-lters must be used with this inator to ensure product accuracy
and longevity.
OPERATION
TO READ PRESSURE:
Remove tyre valve cap. With clip-on air chuck lever depressed, rmly press
chuck onto tyre valve stem and release lever, ensure that no air leaks.
Check pressure gauge.
Digital - the digital display will activate once the tyre pressure is sensed.
If no pressure is sensed the display will not turn on. Press the tyre inator
lever to add air into the tyre, before reading the pressure.
Analogue - the dial gauge will activate once the tyre pressure is sensed.
Ifno pressure is sensed ,press the tyre inator lever to add air into the tyre,
before reading the pressure.
TO INFLATE:
With clip-on air chuck lever depressed, rmly press chuck onto tyre
valve stem and release lever, ensure that no air leaks. Fully depress the
tyre inator lever for an appropriate period of time and release the lever.
Checkpressure gauge and repeat the procedure until correct pressure level
is achieved.
TO DEFLATE:
With clip-on air chuck lever depressed, rmly press chuck onto tyre valve
stem and release lever, ensure that no air leaks. Depress the tyre inator
lever half way (until air can be heard to be escaping) for an appropriate
period of time and release the lever. Check pressure gauge and repeat the
procedure until correct pressure level is achieved.
SAFETY
Never exceed the maximum pressure of the tyre. Check that the hose and
chuck are in good condition with no damageorcracks. Ensure safe working
environment when using compressed air. Return to authorised service agent
for repair and maintenance.
WARNING
To avoid risk of personal injury, especially to the eyes, face and skin
DONOT direct the air stream at any person, or any part of the body.
Thisequipment is not intended for use by children without adult
supervision. The manufacturer reserves the right to change product
features at any time without notice.
SPECIFICATIONS
Part No. 10.2000OS4 10.2000OS5
Operation Inate / deate / measure Inate / deate / measure
Supply pressure max. 200 psi 200 psi
Max. inflation 138 psi, 9.6 bar 138 psi, 9.6 bar
Chuck type Clip on Twin clip
Chuck style Single Dual angle
Scale psi, bar psi, bar
Inlet size 1/4" BSP 1/4" BSP
Hose length 2700 mm 2700 mm
Accuracy ± 2 psi @ 25 - 75 psi ± 2 psi @ 25 - 75 psi
Inflation volume L/min 500 L/min @ 188 psi 500 L/min @ 188 psi
Dimensions 265 L x 50 W x 70 H mm 265 L x 50 W x 70 H mm
Weight .95 kg .95 kg
Advised application Industrial, workshops Industrial, workshops
Packaging style Jamec Pem Box Jamec Pem Box
SPECIFICATIONS
Part No. 10.2000 10.2000OS
Operation Inate / deate / measure Inate / deate / measure
Supply pressure max. 200 psi 200 Psi
Max. inflation 138 psi 138 Psi, 9.6 Bar
Chuck type Hold on Hold on
Chuck style Dual angle Dual angle
Scale psi, kPa Psi, bar
Inlet size 1/4" BSP 1/4" Bsp
Hose length 500 mm 500 mm
Accuracy ± 2 psi @ 25 - 75 psi ± 2 Psi @ 25 - 75 psi
Inflation volume L/min 500 L/min @ 188 psi 500 L/min @ 188 psi
Dimensions 265 L x 50 w x 70 h mm 265 L x 50 w x 70 h mm
Weight .95 kg .95 Kg
Advised application Industrial, workshops Industrial, workshops
Packaging style Jamec Pem Box Jamec Pem Box

Distributed by
TRADEPEM INDUSTRIAL PTY LTD.
CALIBRATION CERTIFICATE
This Tyre Inator Part Number: 10.2000, 10.2000OS, 10.2000OS4 and
10.2000OS5 has been calibrated in its normal working position on test
equipment with an accuracy that is traceable to standards according to:
EN12645: 2014
Serial Number:
Date:
ALLOWABLE TOLERANCE
PSI
± 1.2 Up to and including 58 psi
± 2.3 Between 58 & 145 psi inclusive
± 3.6 Greater than 145 psi
TEST RESULTS
REFERENCE PRESSURE PSI 29.0 58.0 87.0 116.0
DISPLAY PRESSURE PSI
IMPORTANT
No responsibility is accepted for incorrect use of this product.