JAMEC PEM PRO Series User manual

AIR HOSE REEL
PRO SERIES - RETRACTABLE
OPERATING INSTRUCTIONS
PRODUCT NO.
58.2012 - 32 metre x 8 mm (5/16") Reinforced PU Braided Hose
58.1034 - 20 metre x 9.5 mm (3/8") Reinforced PVC Braided Hose
58.1056 - 15 metre x 12.5 mm (1/2") Reinforced PVC Braided Hose
58.2089 - 20 metre x 9.2 mm (3/8") Reinforced Extreme Hose

AIR HOSE REEL
PRO SERIES - RETRACTABLE
Extreme Ultraex Reinforced Hose is a special blend of hose that has been
developed for today’s demanding conditions, it stay exible in the cold and
doesn’t kink in the heat, allowing full ow in all-weather conditions.
It’s a tough hose for tough conditions
FEATURES
■Hose layering system
■Auto lock / auto rewind
■Solid brass internal spindle
■No tools required adjustable hose stop
■Wall mount with 180° pivot
■Weather resistant UV stabilised polypropylene case
■Leader hose 2 m with brassttings
■Includes Jamec Pem Extreme Ultraex Hose
SPECIFICATIONS
Part no. 58.2089 58.1056
Hose length 20 m 15 m
Hose I.D 9.2 mm (3/8") 12.5 mm (1/2")
Hose O.D 15.2 mm (5/8") 18.5 mm (3/4")
Leader hose length 2 m with 1/4" BSP Male tting 2 m with 3/8" BSP Male tting
Hose material Extreme Ultraex Reinforced
Hose Reinforced PVC braided
Reel / case type Retractable / polypropylene Retractable / polypropylene
Auto lock / rewind Yes Yes
Max. working
pressure 300 psi 300 psi
Fitting size 1/4" BSP Male 3/8" BSP Male
Bracket 180° Pivoting 180° Pivoting
Weight - kg 8.6 8.6
Product dimensions 569 L x 246.4 W x 441.6 D mm 569 L x 246.4 W x 441.6 D mm
Advised application Air Air (high volume)
SPECIFICATIONS
Part no. 58.1034 58.2012
Hose length 20 m 32 m
Hose I.D 9.5 mm (3/8") 8 mm (5/16")
Hose O.D 16 mm (5/8") 12 mm 1/2")
Leader hose length 2 m with 1/4" BSP Male tting 2 m with 1/4" BSP Male tting
Hose material Reinforced PVC braided Reinforced PU braided
Reel / case type Retractable / polypropylene Retractable / polypropylene
Auto lock / rewind Yes Yes
Max. working
pressure 300 psi 250 psi
Fitting size 1/4" BSP Male 1/4" BSP Male
Bracket 180° Pivoting 180° Pivoting
Weight - kg 8.8 9.7
Product dimensions 569 L x 246.4 W x 441.6 D mm 569 L x 246.4 W x 441.6 D mm
Advised application Air Air (long reach)
1
48
7
2
3
6
5PRODUCT
IDENTIFICATION
1. Mounting Bracket
2. Optional Fixed In-line
Locking Plate
3. Pivot Pin
4. Fully Enclosed Case
5. Carry Handle
6. Solid Brass Internal
Spindle
7. 2 metre Leader Hose
8. Hose with Adjustable
Stopper
INSTALLATION
The JamecPem Air Hose Reel Pro Series Retractable can be
mounted in a horizontal or vertical position.
1. Chose a location that is near to the compressed air source.
2. For large areas, place the hose reel at the centre of the
work area.
3. When mounting the hose reel vertically, ensure there is
adequate clearance under the reel to prevent injury or
damage.
4. Mounting bracket must be installed on a at surface.
Note: It is recommended to install the mounting bracket 0.8
metre (minimum) above
the oor level.
5. Drill 4 x M8 holes to match the holes located in the
Mounting Bracket. (Fig. 1)
6. Connect the hose reel to the Mounting Bracket with the
Pivot Pin. (Fig. 2)
Note: For xed in-line position, t the locking plate onto the
Mounting Bracket prior to inserting the pivot pin. (Fig. 3)
7. Connect the inlet leader hose to the compressed air source.
Note: Apply thread sealing tape to all air line and air hose
ttings.
0.8 METRE MIN.
Fig. 1 Mounting Bracket
Fig. 2 Pivot Pin
Fig. 3 Locking Plate

Distributed by
TRADEPEM INDUSTRIAL PTY LTD.
OPERATION
1. Slowly pull out the hose to the required length. A ‘clicking’ noise will be heard every
revolution of the inner drum. To lock the reel, allow the hose to retract slowly after
hearing the second or third ‘click’.
2. To release the hose, pull out the hose until the ‘clicking’ noise stops, and then allow
the hose to slowly retract while guiding the hose back into the hose reel. The self
layering mechanism will coil the hose back onto the inner drum.
3. To avoid injury and damage, always hold the hose while it is retracting.
IMPORTANT:
If the hose becomes tangled and will not retract - slowly pull out the hose
past the tangled section and then allow the hose to slowly retract while
guiding the hose back into the hose reel.
Always ensure the hose is clean and not twisted.
MAINTENANCE
Always keep the hose clean.
If the hose becomes dirty, clean it with a damp cloth while retracting.
DO NOT twist the hose while in use.
Mount the hose reel in a sheltered area to assist and protect the performance of
the hose and hose reel.
DO NOT allow the hose to contact any corrosive chemicals or uids.
Always retract the hose when not in use.
The JamecPem Air Hose Reel Pro Series Retractable contains a pre-tensioned
spring inside the inner drum assembly. Do not attempt to open the inner
drum assembly.
WARRANTY & CLAIM PROCEDURE
The JamecPem Air Hose Reel Pro Series Retractable is covered against defects in
material and workmanship for a period of 2 years from the purchase date recorded on
the owner’s invoice or receipt.
In the instance of a warranty claim, the owner will be entitled to a replacement unit
or a sufcient repair of the defective part/s and or component/s to ensure normal
operating condition of the hose reel.
WARRANTY EXCLUSIONS
The hose, rubber o-rings and hose stopper are deemed normal wear items and are
not covered under warranty.
The warranty does not extend to parts or components affected or damaged by
accident, normal wear, misuse, neglect or faulty installation.
To register a warranty claim visit: jamecpem.com