Page 3
Section 1. Safety Information .......................4
Section 2. System Description ......................5
2.1 Electrical Specifications...............6
Section 3. Installation Instructions ...............7
3.1 Materials and Tools......................7
3.2 Plumbing Configurations .............7
3.2.1 Recommended Plumbing
Configuration...........................7
3.2.2 Alternate Plumbing
Configurations .........................9
3.3 Installing the Control Center........11
3.4 Earth Bonding (Grounding) .........12
3.5 Installing the Cell and
Flow/Temp/Salinity Sensor..........12
3.6 Connection to an AquaLink®RS
Control System ............................14
3.6.1 Wiring to a
Jandy AquaLink RS.................15
3.6.2 Wiring Multiple AquaPure
Units to a Jandy AquaLink RS 16
Section 4. Pool Water Preparation ................16
4.1 Determining Pool Size ................16
4.2 Determining Pool Size ................16
4.3 Selecting Model Size ...................17
4.4 Chemistry You Need to Know .....17
4.5 Optimum Pool Water
Conditions....................................18
4.6 Chlorine Testing...........................18
4.7 Salt (NaCl sodium chloride) ........18
4.7.1 What Type of Salt? ..................18
4.7.2 How Much Salt? ......................18
4.7.3 How to Add Salt? ....................19
Section 5. Operating Instructions..................22
5.1 Using the Front Panel Controls....22
5.2 Reading the Display.....................23
5.3 Operation .....................................24
5.4 Startup..........................................25
5.4.1 Shocking ..................................25
5.4.2 Apply Power............................25
5.5 Operating in Winter......................26
5.6 Recommendations........................26
Section 6. User Maintenance Instructions ..27
6.1 Daily.............................................27
6.2 Weekly .........................................27
6.3 Monthly........................................27
6.4 Electrolytic Cell Cleaning............27
6.5 Flow/Temp/Salinity Sensor..........28
6.6 Winterizing...................................29
Section 7. Troubleshooting ...........................30
7.1 Problems and Corrective Action ..30
7.2 Service Codes...............................33
7.3 Additional Letter Codes...............33
Section 8. Temperature Conversion..............34
Section 9. Exploded Views and
Replacement Kits.........................35
9.1 Control Center..............................35
9.2 Electrolytic Cell ...........................35
9.3 Flow Sensor .................................35
Table of Contents
