jbc SADS User manual

SADS, SAPS, SAMS, SHTS,
SATS, SDSS, SDRS, SALS,
SDNS, SNHS, STES,
SJTS, SSFS, SWSBT
Tool Holders for Stands
INSTRUCTION MANUAL

Packing List
The following items are included:
This manual corresponds to the following references*:
0015450 SADS for ADS & HDS 0016267 SAPS for APS
0016268 SAMS for AMS 0016269 SHTS for HTS & HDTS
0028036 SATS for ATS 0016272 SDSS for DSS
0016273 SDRS for DRS 0016275 SALS for ALS
0016274 SDNS for DNS 0028410 SNHS for NHS
0016227 STES for TES 0016276 SJTS for JTS
0018634 SSFS for SFS 0028 411 SWSBT for WSBT
Tool Holder ............... 1 unit
*according to purchased
reference
Manual ....................... 1 unit
Ref. 0028444
Before carrying out maintenance, always unplug the tool.
Allow the equipment to cool down. Be sure that the power
supply is disconnected before changing any spare part.
Replacement
2

2
Changing the Tool Holder
Carefully move the tool
holder sidewards until the
cable* comes out (3).
Place the new tool holder
following the disassembling
steps conversely.
Remove the locking knob
(1).
Separate the tool holder
from the stand and remove
the holder screw (2).
max.10 mm
Holder
Screw
Locking
Knob
Cable
*The following references come without cabel connection:
- Ref. 0018634 SSFS for SFS
- Ref. 0028411 SWSBT for WSBT
Tool
Holder
3
www.jbctools.com
1
3

0028444-0122
Specifications
SADS / SAPS / SAMS / SHTS / SATS / SDSS / SDRS /
SALS / SDNS / SNHS / STES / SJTS / SSFS / SWSBT
Tool Holders for Stands
Ref.: see page 2
- Package Dimensions: 111 x 81 x 41 mm
(L x W x H) 4.37 x 3.19 x 1.61 in
Complies with CE standards.
This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic
equipment at the end of its life must be collected and returned to an
authorized recycling facility.
Warranty
JBC’s 2 year warranty covers this equipment against all manufacturing defects,
including the replacement of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment must be returned, postage paid, to
the dealer where it was purchased.
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm